Panasonic AJ- P, AJ-HDC27V Function screen, VTR’s functions are set on this screen, 2.0, All

Setting menu screens (VTR MAIN MENU)

FUNCTION screen

The VTR’s functions are set on this screen.

Item			Variable	VF			Remarks
			range	display
NEWS REC			OFF	USER	For selecting the VTR
MODE		0.2		ENG	START button
		:			acknowledgment time
		2.0			during recording.
					OFF	:
						The pressing of the VTR
						START button is
						acknowledged
						immediately, recording is
						stopped, and the unit is set
						to the REC PAUSE mode.
					0.2—2.:0
						The pressing of the VTR
						START button is not
						acknowledged and
						recording is continued for
						the time set (in increments
						of 0.2 sec.).
HUMID OPE	ON			USER	For selecting the VTR
			OFF	ENG	operation when
					condensation has formed.
					ON	:	Operation is
							continued as usual.
					OFF	:	Operation of all
							controls except the
							POWER switch and
							EJECT button is
							inhibited.
REC START	ALL			USER	For selecting
			NORMAL	ENG	acknowledgement of recording
					started by the VTR START
					button.
					ALL:
						The start of the recording is
						acknowledged regardless of
						the VTR mode.
					NORMAL:
						The start of the recording is
						acknowledged only in the
						STOP (POWER SAVE) mode
						and REC PAUSE mode.
PAUSE TIMER	10			USER	For selecting the amount of
		20		ENG	time REC PAUSE is to be held.
		30			10/20/30/60: 10, 20, 30 or 60
		60			minutes.
RETAKE MODE	ON			USER	Functions for rewinding
			OFF	ENG	the tape to the position
					where recording started.
					ON	:	The RETAKE
							function works.
					OFF	:	The RETAKE
							function does not
							work.
					<Note>
					The RETAKE function is
					set OFF when the unit’s
					power switch has been set
					to ON.

The underlining in the variable range column indicates the setting in the preset mode.

Item			Variable	VF			Remarks
			range	display
HD SDI OUT	ON			USER	For controlling the output
			SIDE SW	ENG	signals of the HD SDI OUT
			AUTO		connector.
			OFF		However, ON or OFF
					cannot be selected for
					these signals during
					recording: the status prior to
					the start of the recording is
					maintained.
					ON	:
					The signals are forcibly
					output. However, the
					signals are output in the
					EE/PB mode when the
					MONITOR OUT SDI
					switch on the side panel is
					set to OFF.
					SIDE SW		:
					The signals are not output
					when the MONITOR OUT
					SDI switch on the side
					panel is set to OFF.
					AUTO	:
					The signals are output
					when the connector has
					been connected to the
					output connector.
					However, the signals are
					output in the EE/PB mode
					when the MONITOR OUT
					SDI switch on the side
					panel is set to OFF.
					OFF	:
					The output is stopped.
INTERVAL REC			ON	USER	For selecting the
MODE			OFF	ENG	intermittent recording
					mode.
					ON	:
					Intermittent recording is
					performed.
					OFF	:
					Intermittent recording is
					not performed.
					<Note>
					Intermittent recording is
					set OFF when the unit’s
					power switch has been set
					to ON.
INTERVAL REC			00s10f	USER	For setting the REC time for
TIME		:		ENG	intermittent recording.
			59s29f		<Note>
					When REC time is set at
					less than 1 second, the
					initial recording time will
					be 1 second.
INTERVAL			00h00m02s	USER	For setting the REC
PAUSE TIME		:		ENG	PAUSE time for
			23h59m59s		intermittent recording.

97