Panasonic AJ- P, AJ-HDC27V High Setting screen, Additional DTL 1 screen, Additional DTL2 screen

Setting menu screens (CAM MAIN MENU 1)

HIGH SETTING screen

The high level gain is set on this screen.

Item			Variable		VF	Remarks
				range	display
MASTER GAIN	–6dB				USER	–6dB, –3 dB, 0 dB, 3 dB, 6
		:			ENG	dB, 9 dB, 12 dB, 18 dB, 24
			12dB			dB or 30 dB can be set.
		:
			30dB
H. DTL LEVEL	0				USER	For setting H.DTL (detail)
		:			ENG	level.
			12
		:
		63
V. DTL LEVEL	0				USER	For setting V.DTL (detail)
		:			ENG	level.
		16
		:
		63
DTL CORING	0				USER	For setting DTL coring.
		:			ENG
		5
		:
		15
H. DTL FREQ	0				USER	For selecting H.DTL
		:			ENG	FREQUENCY.
			22
		:
		29
LEVEL DEPEND	0				USER	For setting LEVEL
		:			ENG	DEPEND.
		5				The detail of only the dark
						areas is removed when
						the Y detail is boosted.
						The higher the figure set
						for this item, the broader
						the range of the detail
						which is removed.
MASTER		0.35			USER	Master gamma setting.
GAMMA		:			ENG	(0.01 step)
		0.45
		:
		0.75
BLACK			ON		USER	For setting the mode to
STRETCH			OFF		ENG	compensate for low-
						brightness black stretch to
						ON or OFF.
MATRIX TABLE	A				USER	For selecting the color
			B		ENG	correction matrix table.
			OFF
COLOR			ON		USER	For setting the 12-axis
CORRECTION			OFF		ENG	independent color
						correction to ON or OFF.

The underlining in the variable range column indicates the setting in the preset mode.

ADDITIONAL DTL 1 screen

The special detail features of the camera are set on this screen.

Item		Variable	VF	Remarks
		range	display
KNEE		ON	USER	For setting the knee
APERTURE		OFF	ENG	aperture to ON or OFF.
				At the “ON” setting, the
				detail above the knee
				point is boosted.
SLIM DTL	ON		USER	For setting the mode to
		OFF	ENG	make the detail finer to
				ON or OFF.

ADDITIONAL DTL2 screen

The special detail features of the camera are set on this screen.

Item			Variable	VF	Remarks
			range	display
KNEE APA LVL	0			USER	For changing the detail
		5		ENG	level in the high-
					brightness areas.
DTL GAIN (+)	–31			USER	For changing the H detail
	:			ENG	level in the “+” direction.
	+00
	:
	+31
DTL GAIN (–)	–31			USER	For changing the H detail
	:			ENG	level in the “–” (bottom)
	+00				direction.
	:
	+31
DTL CLIP	00			USER	For changing the clipping
	:			ENG	level of the detail signal.
	47
	:
	63
DTL SOURCE	(G+B)/2			USER	For setting the ratio
			(R+G)/2	ENG	between the RGB signal
			(2G+R+B)/4		components which
			(3G+R)/4		generate the detail signal.
			R
			G
V DTL FREQ.	360TV			USER	For setting the V. DTL
			450TV	ENG	FREQUENCY.
			540TV
			630TV
			720TV

83