Panasonic AJ- P, AJ-HDC27V Select the file No, Give a title to the selected file

Setup card operations

Saving the data settings on the card

1 Perform the menu operations (pages 72 to 74), and display the “CAM CARD READ/WRITE” screen.

n< CAM CARD READ/WRITE >

SELECT :1

READ

SELECT :1

WRITE

CARD CONFIG

READ USER DATA

TITLE :

Select the file No.

2 Turn the JOG dial button to move the arrow (cursor) to the SELECT item which comes after WRITE, and press the JOG dial button.

< CAM CARD READ/WRITE >

SELECT :1

READ

n SELECT :1

WRITE CARD CONFIG READ USER DATA

TITLE :

Give a title to the selected file.

4 Turn the JOG dial button to move the arrow (cursor) to the TITLE item.

< CAM CARD READ/WRITE >

SELECT :1

READ

SELECT :1

WRITE

CARD CONFIG

READ USER DATA

m

TITLE :

5 When the JOG dial button is pressed, the arrow (cursor) starts flashing, and the input mode is established.

< CAM CARD READ/WRITE >

SELECT :1

READ

SELECT :1

WRITE

CARD CONFIG

READ USER DATA

m

TITLE :

3 Turn the JOG dial button to select a number from 1 to 8, and press the JOG dial button.

6	Turn the JOG dial button until the character to be
	set appears. When the button is turned, the
	character displayed is switched in the following
	sequence:
	Space:	)
		7
	letters: A—Z
		7
	numbers: 0—9
		7
	symbols: ’, >, <, /, –
7	Press the JOG dial button to enter the character.
8	Turn the JOG dial button to move the arrow
	(cursor) to the next position (right), and repeat
	steps 5	to 7 to set the characters (maximum of 8).

63