Panasonic WV-CLR924AE 4Gen-lock Input Connector GEN-LOCK, 5Video Output Connector Video OUT

Page 11

The selected full or half duplex setting will be enabled after the camera is powered up again.

!4Gen-lock Input Connector (GEN-LOCK)

This connector is used to connect an external sys- tem for synchronization.

!5Video Output Connector (VIDEO OUT)

This connector is used to connect with the VIDEO IN connector of the monitor.

!6RS485 Terminals

(RS485, T(A)/T(B)/R(A)/R(B)/GND)

These terminals are used for RS-485 Camera site communication. Connect RS-485 cables to these terminals.

!7Alarm Output Terminal (ALARM OUT/GND)

Connects to the alarm input connector (terminal) of an external device. When the camera detects motion, the alarm output signal is supplied to the connected external device (Open collector output: 16 V DC, 100 mA max).

Note: This signal output is not affected by the alarm data setting in the RS485 setup operations. (See page 26.)

!8Day/Night Input Terminal (DAY/NIGHT IN/GND)

This terminal is used for connecting the camera to an external day/night detecting sensor.

 

 

IN/OUTPUT

 

 

1

TERMINAL

 

 

 

B

 

T

 

 

 

 

 

 

 

 

A

 

 

 

2

 

 

 

RS485

!6

3

 

B

 

R

 

4

 

A

 

 

 

 

 

5

 

GND

 

 

 

 

 

!7

 

6

 

GND

ALARM

 

 

 

OUT

 

 

7

 

 

 

 

 

 

!8

 

8

 

GND

DAY/

 

9

 

 

IN

NIGHT

 

 

 

!9AC Inlet Socket

Plug the power cord (supplied as a standard accessory) into this socket and connect it to an AC outlet.

@0AC/DC Compatible Input Terminal (DC 12V IN/AC 24V IN, GND)

This terminal is for connecting the 12 V DC or 24 V AC power supply cord.

Caution: Connect to 12 V DC (10.8 V-16 V) or 24 V AC (19.5 V-28 V) class 2 power supply only. Be sure to connect the grounding lead to the GND terminal when the power is supplied from a 24 V AC power source.

-11-

Image 11
Contents Model No. WV-CLR920A WV-CLR924AE English Version Model No. WV-CLR920A/CLR924AE Serial No Important Safety Instructions S3125A Preface ContentsFeatures Never face the camera towards the sun PrecautionsClean the CCD faceplate with care Handle the camera with careWV-CLR924AE Major Operating Controls and Their Functions2RS-485 Termination Switch Hi-Z, RS485 Line Auto Iris Lens ConnectorFlange-back Adjusting Ring FB 1Gen-lock Termination Switch Hi-Z, G/L 75Ω6RS485 Terminals RS485, TA/TB/RA/RB/GND 4Gen-lock Input Connector GEN-LOCK5Video Output Connector Video OUT 7Alarm Output Terminal Alarm OUT/GNDTilts ConnectionsWV-CLR920A 220 240 V AC 50Hz WV-CLR924AE 12 V DC/24 V AC 50HzRecommended wire gauge sizes for 24 V AC line AC Power SupplyReplacement of Auto Iris Lens Connector Mounting the Lens Half duplex Internal DiagramRS485 Terminal Full duplexSystem Connection Focus or FLANGE-BACK Adjustment Mounting from the top Installation of CameraCamera Setup Menu SetupATW1 ATW2 AWC AWC → Push SW Opening the Setup Menu Setup Operation Important Notices Editing the Setup MenuRS485 SET UP Delay Time Setting XON/XOFF SettingWait Time Setting Alarm Data SettingInstallation of Software for RS-485 Communi- cation To edit the Camera ID Setting ProceduresCamera Identification Camera ID Setting Camera ID ON/OFFTo determine the display position of the Camera ID Light Control Setting ALC/ELCTo erase all characters in the editing area Back Light Compensation Back Light Comp ALC Mode with Preset onSelect ALC and press I. The ALC Cont menu appears ALC Mode with Preset OFFBlinking Compensating Flare Phenomenon Peak Mode Shutter Speed Setting ShutterGain Control Setting AGC ON/OFF Electronic Sensitivity Enhancement Sens UP Rules on synchronization Synchronization Setting SyncVBS Gen-lock Mode Extvbs Internal Sync Mode INTPhase SC Coarse VS Gen-lock Mode Extvs Line-lock Sync Mode LL ATW1 Auto Tracing White Balance White Balance Setting White BALAuto-Tracing White Balance Mode ATW Push SW Manual Fine Adjustment for AWC ATW Motion Detector Setting Motion DETAvailable Time second 2 s, 5 s, 10 s, 30 s Lens Drive Signal SelectionSpecial Menu Special Chroma Level Setting Chroma GainAperture Gain Setting AP Gain Pedestal Level Setting Pedestal10-5. BW Burst BW To reset to the factory settingsPrevention of Blooming and Smear SpecificationsWV-CLR920A Optional Accessories Standard AccessoriesOsaka, Japan

WV-CLR924AE, WV-CLR920A specifications

The Panasonic WV-CLR920A and WV-CLR924AE security cameras are robust surveillance solutions designed for both commercial and residential applications. Renowned for their advanced features and reliability, these models serve as essential tools in modern security systems, meeting the ever-evolving needs of users.

The WV-CLR920A is equipped with a high-resolution image sensor that delivers outstanding video clarity, making it suitable for a variety of monitoring environments. With its ability to capture images in low-light conditions, this camera ensures that important details are not missed, even during nighttime. The incorporation of advanced image processing technologies allows for enhanced color reproduction and reduced noise, providing clear images regardless of the lighting scenario.

One of the standout features of the WV-CLR924AE is its advanced motion detection capabilities. This model can intelligently differentiate between various types of movement, filtering out non-essential activity and reducing false alarms. The integration of smart analytics allows users to set specific detection zones, further enhancing its effectiveness in monitoring critical areas.

Both models offer robust connectivity options, including Ethernet and Wi-Fi, allowing seamless integration into existing networks. Users can easily access live feeds or recorded footage remotely via a dedicated application, making real-time monitoring convenient and straightforward. The user-friendly interface and configuration options ensure that users can customize settings to fit their unique security needs.

Durability is a hallmark of the Panasonic WV-CLR series. Built with high-quality materials, these cameras are designed to withstand harsh weather conditions and potential vandalism, ensuring long-term performance. Their IP67 rating confirms that they are dust-tight and can endure heavy rain, making them ideal for outdoor installation.

Moreover, Panasonic prioritizes data security, equipping these models with robust encryption protocols to protect user information and prevent unauthorized access. This feature is increasingly important in today's digital landscape, where cybersecurity is a major concern for users.

In conclusion, the Panasonic WV-CLR920A and WV-CLR924AE offer a blend of advanced technology, ease of use, and secure connectivity, making them excellent choices for anyone seeking to enhance their security infrastructure. With their impressive features and reliability, they stand out in the crowded market of surveillance cameras.