Panasonic Connections, WV-CLR920A 220 240 V AC 50Hz, WV-CLR924AE 12 V DC/24 V AC 50Hz, Tilts

Page 12

CONNECTIONS

A. WV-CLR920A (220 - 240 V AC 50Hz)

1.Plug the AC power cord (supplied as standard accessory) into the AC inlet socket.

2.Connect the AC power cord to a 220 - 240 V AC 50 Hz outlet.

The WV-CLR924AE has an AC/DC compatible input ter- minal. The 12 V DC or 24 V AC power supply cord can be connected to this terminal. The camera detects the power source automatically.

DC 12V

AC 24V

IN

IN

Notes:

•

Connect the power cord firmly.

• The power cord should be long enough for panning

 

and tilting.

 

If the cable is too short, the power cord plug may

 

be pulled off the camera when the camera pans or

1.12 V DC Power Supply Connect the power cord to the AC/DC compatible input terminal on the rear panel of the camera.

1

2

12 V DC

GND

(10.8 V - 16 V)

 

tilts.

B. WV-CLR924AE (12 V DC/24 V AC 50Hz)

Cautions:

1.Connect to 12 V DC (10.8 V - 16 V) or 24 V AC (19.5 V - 28 V) class 2 power supply only. Be sure to connect the grounding lead to the GND terminal when the power is supplied from a 24 V AC power source.

2.To prevent fire or electric shock hazard, use a UL listed cable (VW-1, style 1007) for the Input Terminal.

3.Take AC 24 V power supply from a third-party external power supply device that complies with the safety standard.

Resistance of copper wire [at 20 °C (68 °F)]

Copper wire

#24

#22

#20

#18

size (AWG)

(0.22 mm2)

(0.33 mm2)

(0.52 mm2)

(0.83 mm2)

Resistance

0.078

0.050

0.030

0.018

Ω/m

 

 

 

 

Resistance

0.026

0.017

0.010

0.006

Ω/ft

 

 

 

 

You can use the formula below to select the power sup- ply, and power cable. The voltage supplied to the power-in terminals must be between 10.8 V - 16 V.

10.8 V(minimum) ≤ VA – 2RLI ≤ 16 V (maximum)

VA: Output voltage of power supply

R:Resistance (Ω/m) (Ω/ft), see table

L:Cable length (m) (ft)

I:Current consumption (A), see specifications

-12-

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Model No. WV-CLR920A WV-CLR924AE English Version Model No. WV-CLR920A/CLR924AE Serial No Important Safety Instructions S3125A Contents PrefaceFeatures Precautions Clean the CCD faceplate with careHandle the camera with care Never face the camera towards the sunMajor Operating Controls and Their Functions WV-CLR924AEAuto Iris Lens Connector Flange-back Adjusting Ring FB1Gen-lock Termination Switch Hi-Z, G/L 75Ω 2RS-485 Termination Switch Hi-Z, RS485 Line4Gen-lock Input Connector GEN-LOCK 5Video Output Connector Video OUT7Alarm Output Terminal Alarm OUT/GND 6RS485 Terminals RS485, TA/TB/RA/RB/GNDConnections WV-CLR920A 220 240 V AC 50HzWV-CLR924AE 12 V DC/24 V AC 50Hz TiltsAC Power Supply Recommended wire gauge sizes for 24 V AC lineReplacement of Auto Iris Lens Connector Mounting the Lens Internal Diagram RS485 TerminalFull duplex Half duplexSystem Connection Focus or FLANGE-BACK Adjustment Installation of Camera Mounting from the topSetup Camera Setup MenuATW1 ATW2 AWC AWC → Push SW Opening the Setup Menu Setup Operation Editing the Setup Menu Important NoticesRS485 SET UP XON/XOFF Setting Wait Time SettingAlarm Data Setting Delay Time SettingInstallation of Software for RS-485 Communi- cation Setting Procedures Camera Identification Camera ID SettingCamera ID ON/OFF To edit the Camera IDLight Control Setting ALC/ELC To erase all characters in the editing areaTo determine the display position of the Camera ID ALC Mode with Preset on Back Light Compensation Back Light CompALC Mode with Preset OFF Select ALC and press I. The ALC Cont menu appearsBlinking Shutter Speed Setting Shutter Gain Control Setting AGC ON/OFFCompensating Flare Phenomenon Peak Mode Electronic Sensitivity Enhancement Sens UP Synchronization Setting Sync Rules on synchronizationInternal Sync Mode INT VBS Gen-lock Mode ExtvbsPhase SC Coarse VS Gen-lock Mode Extvs Line-lock Sync Mode LL White Balance Setting White BAL Auto-Tracing White Balance Mode ATWATW1 Auto Tracing White Balance Push SW Motion Detector Setting Motion DET Manual Fine Adjustment for AWC ATWLens Drive Signal Selection Available Time second 2 s, 5 s, 10 s, 30 sChroma Level Setting Chroma Gain Aperture Gain Setting AP GainPedestal Level Setting Pedestal Special Menu Special10-5. BW To reset to the factory settings Burst BWSpecifications Prevention of Blooming and SmearWV-CLR920A Standard Accessories Optional AccessoriesOsaka, Japan

WV-CLR924AE, WV-CLR920A specifications

The Panasonic WV-CLR920A and WV-CLR924AE security cameras are robust surveillance solutions designed for both commercial and residential applications. Renowned for their advanced features and reliability, these models serve as essential tools in modern security systems, meeting the ever-evolving needs of users.

The WV-CLR920A is equipped with a high-resolution image sensor that delivers outstanding video clarity, making it suitable for a variety of monitoring environments. With its ability to capture images in low-light conditions, this camera ensures that important details are not missed, even during nighttime. The incorporation of advanced image processing technologies allows for enhanced color reproduction and reduced noise, providing clear images regardless of the lighting scenario.

One of the standout features of the WV-CLR924AE is its advanced motion detection capabilities. This model can intelligently differentiate between various types of movement, filtering out non-essential activity and reducing false alarms. The integration of smart analytics allows users to set specific detection zones, further enhancing its effectiveness in monitoring critical areas.

Both models offer robust connectivity options, including Ethernet and Wi-Fi, allowing seamless integration into existing networks. Users can easily access live feeds or recorded footage remotely via a dedicated application, making real-time monitoring convenient and straightforward. The user-friendly interface and configuration options ensure that users can customize settings to fit their unique security needs.

Durability is a hallmark of the Panasonic WV-CLR series. Built with high-quality materials, these cameras are designed to withstand harsh weather conditions and potential vandalism, ensuring long-term performance. Their IP67 rating confirms that they are dust-tight and can endure heavy rain, making them ideal for outdoor installation.

Moreover, Panasonic prioritizes data security, equipping these models with robust encryption protocols to protect user information and prevent unauthorized access. This feature is increasingly important in today's digital landscape, where cybersecurity is a major concern for users.

In conclusion, the Panasonic WV-CLR920A and WV-CLR924AE offer a blend of advanced technology, ease of use, and secure connectivity, making them excellent choices for anyone seeking to enhance their security infrastructure. With their impressive features and reliability, they stand out in the crowded market of surveillance cameras.
Top Page Image Contents