Panasonic WV-CLR924AE, WV-CLR920A operating instructions Phase SC Coarse

Page 37

3.Confirm that INT changed to EXT (VBS) on the menu.

Caution: The gen-lock input signal should meet the CCIR specifications and should not contain jit- ter, such as a VTR playback signal, as it could disturb synchronization.

4.After confirming that the cursor is on EXT (VBS), press I. The phase adjustment menu appears on the monitor.

** SYNC **

 

H PHASE

 

 

........I

 

 

-

+

SC COARSE

1(1--4)

 

SC FINE

....I....

 

-

+

RET END

5.Supply the video output signal of the camera to be adjusted and the reference gen-lock input signal to a dual-trace oscilloscope.

6.Set the oscilloscope to the horizontal rate and expand the horizontal sync portion on the oscillo- scope.

7.Move the cursor to H PHASE.

8.Adjust the horizontal phase by pressing L or M. The adjustable range is 0 - 2.0 µs.

9.Move the cursor to SC COARSE.

10.Press L or M to match the chroma phase of the camera’s video signal, when observed at the output of the Special Effect Generator (SEG) or Switcher, as closely as possible to the colour of the original

scene. (SC COARSE adjustment can be increment- ed in steps of 90 degrees (4 steps) by pressing L or M.)

Note: After the fourth step, the adjustment returns to the first step.

1 (1 - - 4): 0 degrees

2 (1 - - 4): 90 degrees

3 (1 - - 4): 180 degrees

4 (1 - - 4): 270 degrees

11.Move the cursor to SC FINE.

12.Press L or M to match the colour (hue) of the camera’s video signal, when observed at the output of the Special Effect Generator (SEG) or Switcher, as closely as possible to the colour of the original scene.

-37-

Page 36 Page 38
Image 37
Page 36 Page 38
Contents Model No. WV-CLR920A WV-CLR924AE English Version Model No. WV-CLR920A/CLR924AE Serial No Important Safety Instructions S3125A Preface ContentsFeatures Clean the CCD faceplate with care PrecautionsHandle the camera with care Never face the camera towards the sunWV-CLR924AE Major Operating Controls and Their FunctionsFlange-back Adjusting Ring FB Auto Iris Lens Connector1Gen-lock Termination Switch Hi-Z, G/L 75Ω 2RS-485 Termination Switch Hi-Z, RS485 Line5Video Output Connector Video OUT 4Gen-lock Input Connector GEN-LOCK7Alarm Output Terminal Alarm OUT/GND 6RS485 Terminals RS485, TA/TB/RA/RB/GNDWV-CLR920A 220 240 V AC 50Hz ConnectionsWV-CLR924AE 12 V DC/24 V AC 50Hz TiltsRecommended wire gauge sizes for 24 V AC line AC Power SupplyReplacement of Auto Iris Lens Connector Mounting the Lens RS485 Terminal Internal DiagramFull duplex Half duplexSystem Connection Focus or FLANGE-BACK Adjustment Mounting from the top Installation of CameraCamera Setup Menu SetupATW1 ATW2 AWC AWC → Push SW Opening the Setup Menu Setup Operation Important Notices Editing the Setup MenuRS485 SET UP Wait Time Setting XON/XOFF SettingAlarm Data Setting Delay Time SettingInstallation of Software for RS-485 Communi- cation Camera Identification Camera ID Setting Setting ProceduresCamera ID ON/OFF To edit the Camera IDTo erase all characters in the editing area Light Control Setting ALC/ELCTo determine the display position of the Camera ID Back Light Compensation Back Light Comp ALC Mode with Preset onSelect ALC and press I. The ALC Cont menu appears ALC Mode with Preset OFFBlinking Gain Control Setting AGC ON/OFF Shutter Speed Setting ShutterCompensating Flare Phenomenon Peak Mode Electronic Sensitivity Enhancement Sens UP Rules on synchronization Synchronization Setting SyncVBS Gen-lock Mode Extvbs Internal Sync Mode INTPhase SC Coarse VS Gen-lock Mode Extvs Line-lock Sync Mode LL Auto-Tracing White Balance Mode ATW White Balance Setting White BALATW1 Auto Tracing White Balance Push SW Manual Fine Adjustment for AWC ATW Motion Detector Setting Motion DETAvailable Time second 2 s, 5 s, 10 s, 30 s Lens Drive Signal SelectionAperture Gain Setting AP Gain Chroma Level Setting Chroma GainPedestal Level Setting Pedestal Special Menu Special10-5. BW Burst BW To reset to the factory settingsPrevention of Blooming and Smear SpecificationsWV-CLR920A Optional Accessories Standard AccessoriesOsaka, Japan

WV-CLR924AE, WV-CLR920A specifications

The Panasonic WV-CLR920A and WV-CLR924AE security cameras are robust surveillance solutions designed for both commercial and residential applications. Renowned for their advanced features and reliability, these models serve as essential tools in modern security systems, meeting the ever-evolving needs of users.

The WV-CLR920A is equipped with a high-resolution image sensor that delivers outstanding video clarity, making it suitable for a variety of monitoring environments. With its ability to capture images in low-light conditions, this camera ensures that important details are not missed, even during nighttime. The incorporation of advanced image processing technologies allows for enhanced color reproduction and reduced noise, providing clear images regardless of the lighting scenario.

One of the standout features of the WV-CLR924AE is its advanced motion detection capabilities. This model can intelligently differentiate between various types of movement, filtering out non-essential activity and reducing false alarms. The integration of smart analytics allows users to set specific detection zones, further enhancing its effectiveness in monitoring critical areas.

Both models offer robust connectivity options, including Ethernet and Wi-Fi, allowing seamless integration into existing networks. Users can easily access live feeds or recorded footage remotely via a dedicated application, making real-time monitoring convenient and straightforward. The user-friendly interface and configuration options ensure that users can customize settings to fit their unique security needs.

Durability is a hallmark of the Panasonic WV-CLR series. Built with high-quality materials, these cameras are designed to withstand harsh weather conditions and potential vandalism, ensuring long-term performance. Their IP67 rating confirms that they are dust-tight and can endure heavy rain, making them ideal for outdoor installation.

Moreover, Panasonic prioritizes data security, equipping these models with robust encryption protocols to protect user information and prevent unauthorized access. This feature is increasingly important in today's digital landscape, where cybersecurity is a major concern for users.

In conclusion, the Panasonic WV-CLR920A and WV-CLR924AE offer a blend of advanced technology, ease of use, and secure connectivity, making them excellent choices for anyone seeking to enhance their security infrastructure. With their impressive features and reliability, they stand out in the crowded market of surveillance cameras.
Top Page Image Contents