Panasonic WV-CLR920A Back Light Compensation Back Light Comp, ALC Mode with Preset on

Page 30

ALC: Select this mode when an auto iris lens (ALC lens) is used with this camera.

ELC: Select this mode when a fixed iris lens or manual iris lens is used with this camera.

** CAM SET UP **

CAMERA ID

OFF

↵

ALC/ELC

ALC

↵

SHUTTER

OFF

 

AGC

ON(DNR-H)↵

SENS UP

OFF

 

SYNC

INT

 

WHITE BAL

ATW1 ↵

MOTION DET

OFF

 

LENS DRIVE

DC

 

RET

1.Move the cursor to ALC/ELC.

2.Select ALC or ELC.

Cautions:

1.Under bright lighting conditions such as outdoors, use an ALC type lens because the ELC control range is not wide enough under these conditions.

2.Use an ALC type lens if the following phenomena occur:

•Strong smear and/or blooming on highlight objects such as spotlight or sunlight from win- dows.

•Noticeable flicker in the picture and/or colour rendition variations.

3.If ELC is selected, SHUTTER is not available.

Back Light Compensation (BACK LIGHT COMP)

Back light compensation is available for both the ALC and ELC modes. It eliminates strong background light- ing which makes the camera picture dark, such as a spotlight. You can select one of two modes (PRESET ON or PRESET OFF) of back light compensation.

2-1. ALC Mode with PRESET ON

In normal use, the important object in a scene is placed in the centre of the monitor’s screen. In the factory setup mode, more photometric weight is given to the centre of the screen (where the important object is located) than to the edge of the picture (where a bright backlight would most likely be located). In this mode, the object at the centre of the screen will always be clearly visible regardless of backlight variations.

Note: If ELC is selected, set LEVEL according to this procedure.

-30-

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Model No. WV-CLR920A WV-CLR924AE English Version Model No. WV-CLR920A/CLR924AE Serial No Important Safety Instructions S3125A Contents PrefaceFeatures Handle the camera with care PrecautionsClean the CCD faceplate with care Never face the camera towards the sunMajor Operating Controls and Their Functions WV-CLR924AE1Gen-lock Termination Switch Hi-Z, G/L 75Ω Auto Iris Lens ConnectorFlange-back Adjusting Ring FB 2RS-485 Termination Switch Hi-Z, RS485 Line7Alarm Output Terminal Alarm OUT/GND 4Gen-lock Input Connector GEN-LOCK5Video Output Connector Video OUT 6RS485 Terminals RS485, TA/TB/RA/RB/GNDWV-CLR924AE 12 V DC/24 V AC 50Hz ConnectionsWV-CLR920A 220 240 V AC 50Hz TiltsAC Power Supply Recommended wire gauge sizes for 24 V AC lineReplacement of Auto Iris Lens Connector Mounting the Lens Full duplex Internal DiagramRS485 Terminal Half duplexSystem Connection Focus or FLANGE-BACK Adjustment Installation of Camera Mounting from the topSetup Camera Setup MenuATW1 ATW2 AWC AWC → Push SW Opening the Setup Menu Setup Operation Editing the Setup Menu Important NoticesRS485 SET UP Alarm Data Setting XON/XOFF SettingWait Time Setting Delay Time SettingInstallation of Software for RS-485 Communi- cation Camera ID ON/OFF Setting ProceduresCamera Identification Camera ID Setting To edit the Camera IDLight Control Setting ALC/ELC To erase all characters in the editing areaTo determine the display position of the Camera ID ALC Mode with Preset on Back Light Compensation Back Light CompALC Mode with Preset OFF Select ALC and press I. The ALC Cont menu appearsBlinking Shutter Speed Setting Shutter Gain Control Setting AGC ON/OFFCompensating Flare Phenomenon Peak Mode Electronic Sensitivity Enhancement Sens UP Synchronization Setting Sync Rules on synchronizationInternal Sync Mode INT VBS Gen-lock Mode ExtvbsPhase SC Coarse VS Gen-lock Mode Extvs Line-lock Sync Mode LL White Balance Setting White BAL Auto-Tracing White Balance Mode ATWATW1 Auto Tracing White Balance Push SW Motion Detector Setting Motion DET Manual Fine Adjustment for AWC ATWLens Drive Signal Selection Available Time second 2 s, 5 s, 10 s, 30 sPedestal Level Setting Pedestal Chroma Level Setting Chroma GainAperture Gain Setting AP Gain Special Menu Special10-5. BW To reset to the factory settings Burst BWSpecifications Prevention of Blooming and SmearWV-CLR920A Standard Accessories Optional AccessoriesOsaka, Japan

WV-CLR924AE, WV-CLR920A specifications

The Panasonic WV-CLR920A and WV-CLR924AE security cameras are robust surveillance solutions designed for both commercial and residential applications. Renowned for their advanced features and reliability, these models serve as essential tools in modern security systems, meeting the ever-evolving needs of users.

The WV-CLR920A is equipped with a high-resolution image sensor that delivers outstanding video clarity, making it suitable for a variety of monitoring environments. With its ability to capture images in low-light conditions, this camera ensures that important details are not missed, even during nighttime. The incorporation of advanced image processing technologies allows for enhanced color reproduction and reduced noise, providing clear images regardless of the lighting scenario.

One of the standout features of the WV-CLR924AE is its advanced motion detection capabilities. This model can intelligently differentiate between various types of movement, filtering out non-essential activity and reducing false alarms. The integration of smart analytics allows users to set specific detection zones, further enhancing its effectiveness in monitoring critical areas.

Both models offer robust connectivity options, including Ethernet and Wi-Fi, allowing seamless integration into existing networks. Users can easily access live feeds or recorded footage remotely via a dedicated application, making real-time monitoring convenient and straightforward. The user-friendly interface and configuration options ensure that users can customize settings to fit their unique security needs.

Durability is a hallmark of the Panasonic WV-CLR series. Built with high-quality materials, these cameras are designed to withstand harsh weather conditions and potential vandalism, ensuring long-term performance. Their IP67 rating confirms that they are dust-tight and can endure heavy rain, making them ideal for outdoor installation.

Moreover, Panasonic prioritizes data security, equipping these models with robust encryption protocols to protect user information and prevent unauthorized access. This feature is increasingly important in today's digital landscape, where cybersecurity is a major concern for users.

In conclusion, the Panasonic WV-CLR920A and WV-CLR924AE offer a blend of advanced technology, ease of use, and secure connectivity, making them excellent choices for anyone seeking to enhance their security infrastructure. With their impressive features and reliability, they stand out in the crowded market of surveillance cameras.
Top Page Image Contents