Panasonic WV-CLR920A, WV-CLR924AE Internal Sync Mode INT, VBS Gen-lock Mode Extvbs

Page 36

Whenever the multiplexed vertical drive pulse (VD2) is supplied to the camera from an external equip- ment such as a Matrix Switcher, the camera sync mode is automatically switched to the VD2 mode.

When the VBS or VS gen-lock mode is to be used select INT from this menu and supply the gen-lock input signal to the Gen-lock Input Connector on the rear panel.

The VBS gen-lock mode has a submenu for hori- zontal and subcarrier phase adjustments. When the cable length of the video output or the gen-lock input is changed, the horizontal and subcarrier phase must be re-adjusted.

The VS gen-lock mode has a submenu for horizon- tal phase adjustments. When the cable length of the video output or the gen-lock input is changed, the horizontal phase must be re-adjusted.

The line-lock mode has a submenu for line-lock ver- tical phase adjustment. If the camera installation is relocated, check the vertical phase adjustment again since the AC line phase may be different.

6-1. Internal Sync Mode (INT)

1.Move the cursor to SYNC and select INT.

2.Press I.

Note: Never supply VD2, VBS, or VS to the camera when you intend to operate the camera in the internal mode. Otherwise your selection will be

ignored because INT has the lowest priority.

** CAM SET UP **

CAMERA ID

OFF

ALC/ELC

ALC

SHUTTER

OFF

 

AGC

ON(DNR-H)

SENS UP

OFF

 

SYNC

INT

 

WHITE BAL

ATW1

MOTION DET

OFF

 

LENS DRIVE

DC

 

RET

6-2. VBS Gen-lock Mode (EXT(VBS))

** CAM SET UP **

** CAM SET UP **

CAMERA ID

OFF

CAMERA ID

OFF

ALC/ELC

ALC

ALC/ELC

ALC

SHUTTER

OFF

 

SHUTTER

OFF

 

 

AGC

ON(DNR-H)

AGC

ON(DNR-H)

SENS UP

OFF

 

SENS UP

OFF

 

 

SYNC

INT

 

SYNC

EXT(VBS)

WHITE BAL

ATW1

WHITE BAL

ATW1

 

MOTION DET

OFF

 

MOTION DET

OFF

 

 

LENS DRIVE

DC

 

LENS DRIVE

DC

 

 

RET

 

 

RET

 

 

 

1.Move the cursor to SYNC and select INT.

2.Connect the coaxial cable for the blackburst or composite colour video signal to the gen-lock input connector.

-36-

Image 36
Contents Model No. WV-CLR920A WV-CLR924AE English Version Model No. WV-CLR920A/CLR924AE Serial No Important Safety Instructions S3125A Contents PrefaceFeatures Precautions Clean the CCD faceplate with careHandle the camera with care Never face the camera towards the sunMajor Operating Controls and Their Functions WV-CLR924AEAuto Iris Lens Connector Flange-back Adjusting Ring FB1Gen-lock Termination Switch Hi-Z, G/L 75Ω 2RS-485 Termination Switch Hi-Z, RS485 Line4Gen-lock Input Connector GEN-LOCK 5Video Output Connector Video OUT7Alarm Output Terminal Alarm OUT/GND 6RS485 Terminals RS485, TA/TB/RA/RB/GNDConnections WV-CLR920A 220 240 V AC 50HzWV-CLR924AE 12 V DC/24 V AC 50Hz TiltsAC Power Supply Recommended wire gauge sizes for 24 V AC lineReplacement of Auto Iris Lens Connector Mounting the Lens Internal Diagram RS485 TerminalFull duplex Half duplexSystem Connection Focus or FLANGE-BACK Adjustment Installation of Camera Mounting from the topSetup Camera Setup MenuATW1 ATW2 AWC AWC → Push SW Opening the Setup Menu Setup Operation Editing the Setup Menu Important NoticesRS485 SET UP XON/XOFF Setting Wait Time SettingAlarm Data Setting Delay Time SettingInstallation of Software for RS-485 Communi- cation Setting Procedures Camera Identification Camera ID SettingCamera ID ON/OFF To edit the Camera IDLight Control Setting ALC/ELC To erase all characters in the editing areaTo determine the display position of the Camera ID ALC Mode with Preset on Back Light Compensation Back Light CompALC Mode with Preset OFF Select ALC and press I. The ALC Cont menu appearsBlinking Shutter Speed Setting Shutter Gain Control Setting AGC ON/OFFCompensating Flare Phenomenon Peak Mode Electronic Sensitivity Enhancement Sens UP Synchronization Setting Sync Rules on synchronizationInternal Sync Mode INT VBS Gen-lock Mode ExtvbsPhase SC Coarse VS Gen-lock Mode Extvs Line-lock Sync Mode LL White Balance Setting White BAL Auto-Tracing White Balance Mode ATWATW1 Auto Tracing White Balance Push SW Motion Detector Setting Motion DET Manual Fine Adjustment for AWC ATWLens Drive Signal Selection Available Time second 2 s, 5 s, 10 s, 30 sChroma Level Setting Chroma Gain Aperture Gain Setting AP GainPedestal Level Setting Pedestal Special Menu Special10-5. BW To reset to the factory settings Burst BWSpecifications Prevention of Blooming and SmearWV-CLR920A Standard Accessories Optional AccessoriesOsaka, Japan

WV-CLR924AE, WV-CLR920A specifications

The Panasonic WV-CLR920A and WV-CLR924AE security cameras are robust surveillance solutions designed for both commercial and residential applications. Renowned for their advanced features and reliability, these models serve as essential tools in modern security systems, meeting the ever-evolving needs of users.

The WV-CLR920A is equipped with a high-resolution image sensor that delivers outstanding video clarity, making it suitable for a variety of monitoring environments. With its ability to capture images in low-light conditions, this camera ensures that important details are not missed, even during nighttime. The incorporation of advanced image processing technologies allows for enhanced color reproduction and reduced noise, providing clear images regardless of the lighting scenario.

One of the standout features of the WV-CLR924AE is its advanced motion detection capabilities. This model can intelligently differentiate between various types of movement, filtering out non-essential activity and reducing false alarms. The integration of smart analytics allows users to set specific detection zones, further enhancing its effectiveness in monitoring critical areas.

Both models offer robust connectivity options, including Ethernet and Wi-Fi, allowing seamless integration into existing networks. Users can easily access live feeds or recorded footage remotely via a dedicated application, making real-time monitoring convenient and straightforward. The user-friendly interface and configuration options ensure that users can customize settings to fit their unique security needs.

Durability is a hallmark of the Panasonic WV-CLR series. Built with high-quality materials, these cameras are designed to withstand harsh weather conditions and potential vandalism, ensuring long-term performance. Their IP67 rating confirms that they are dust-tight and can endure heavy rain, making them ideal for outdoor installation.

Moreover, Panasonic prioritizes data security, equipping these models with robust encryption protocols to protect user information and prevent unauthorized access. This feature is increasingly important in today's digital landscape, where cybersecurity is a major concern for users.

In conclusion, the Panasonic WV-CLR920A and WV-CLR924AE offer a blend of advanced technology, ease of use, and secure connectivity, making them excellent choices for anyone seeking to enhance their security infrastructure. With their impressive features and reliability, they stand out in the crowded market of surveillance cameras.