Panasonic WV-CLR924AE, WV-CLR920A operating instructions 10-5. BW

10-5. BW

1.Move the cursor to BW.

2.Select AUTO1, AUTO2, EXT, ON or OFF using L or M.

Default: OFF

AUTO1: The camera selects black and white mode if the picture is dark, or colour mode if the pic- ture is bright enough.

Note: Colour picture switches to black-and- white picture and vice versa in approxi- mately 1 or 2 minutes after recognition of illuminance.

AUTO2: Applying AUTO1 may cause malfunction when using a source of near-infrared light at night because the illuminance changes signifi- cantly when switching between the colour pic- ture and the black-and-white picture. But AUTO2 allows the unit to prevent malfunction because it simply recognizes a source of light. Note: Because a source of light is simply rec-

ognized based on the information from CCD image pickup element, an object sometimes can not be recognized suc- cessfully when the object is always mov- ing or the object and its background have the same colour.

When you apply this mode, AUTO2, the wavelength of the light source should be 800 nm or more.

EXT: Colour picture reverts to black-and-white when an external DAY/NIGHT switching sig- nal is received (refer to alarm and DAY/ NIGHT connections).

ON: Black and White mode is selected.

OFF: Colour mode is selected.

** SPECIAL **
UP SIDE DOWN	OFF
CHROMA GAIN	....I....
AP GAIN	....I....
PEDESTAL	....I....
	-	+
BW	OFF
BURST (BW)	ON
CAMERA RESET	PUSH SW
RET END

3.Select AUTO1 or AUTO2 using L or M.

4.Press I.

The AUTO1 or AUTO2 menu appears on the moni- tor screen.

** BW AUTO1 **

LEVEL HIGH

DURATION TIME .I..

S L

RET END

-45-