Panasonic NV-GS60GN Manual shutter speed/aperture adjustment, To restore to automatic adjustment

Page 28

LSQT1174ENG.book 28 ページ 2007年1月29日 月曜日 午後1時28分

Record mode

Manual shutter speed/aperture adjustment

Shutter Speed

Adjust it when recording fast-moving subjects.

Aperture

Adjust it when the screen is too bright or too dark. Set to Tape Recording Mode.

1Set the [AUTO/MANUAL/FOCUS] switch to [MANUAL].

AUTO

MANUAL

FOCUS

2Move the joystick left or right to select the shutter aperture icon [ ] or shutter speed icon [ ].

MNL

3Move the joystick left or right in order to adjust the shutter speed or aperture.

MNL

1/50

OPEN

OdB

1)

MNL

2)

MNL

 

1/1000

 

1/50

 

 

F2.0

 

 

 

0dB

 

 

 

 

1)Shutter speed

2)(Aperture) Iris/gain value

ªTo restore to automatic adjustment

Set the [AUTO/MANUAL/FOCUS] switch to [AUTO].

Manual shutter speed adjustment

Avoid recording under fluorescent light, mercury light or sodium light because the colour and brightness of the playback image may change.

If you increase the shutter speed manually, the

sensitivity lowers and accordingly the gain value increases automatically, which may increase the noises on the screen.

You may see vertical lines of light in the playback image of a brightly shining subject or highly reflective subject, but this is not a malfunction.

During normal playback, image movement may not look smooth.

When recording in the extremely bright place, the colour of the screen may change or flickers. If so, adjust the shutter speed manually to 1/50 or 1/100.

Manual iris/gain adjustment

Set the shutter speed before setting the aperture (iris/gain) when manually adjusting both settings.

If the value does not become “OPEN”, you cannot adjust the gain value.

If the gain value is increased, the noise on the

screen increases.

Depending on the zoom magnification, there are iris values that are not displayed.

ªShutter speed range

1/50 to 1/8000 seconds: Tape Recording Mode The shutter speed closer to 1/8000 is faster.

ªIris/gain value range

CLOSE (Closed), F16, ..., F2.0, OPEN (Opened: F1.8) 0dB, ..., 18dB Value closer to [CLOSE] darken the image. Value closer to [18dB] brighten the image. Values with dB are gain values.

28

LSQT1174

Image 28
Contents Operating Instructions Information for your safety Manufacturer is not liable for loss of recorded contentsCarefully observe copyright laws Pages for referenceLSQT1174ENG.book 3 ページ 2007年1月29日 月曜日 午後1時28分 Contents Before using AccessoriesOptional Parts identification and handlingShoulder strap fixture Fitting the lens cap Adjust the belt lengthGrip belt Power supply How to turn on the power How to turn off the powerCharging time and recordable time Turning the camera onRecharging the built-in lithium battery Setting date and timeAbout date/time Using the LCD monitor Using the viewfinderAdjusting the field of view Adjust the focus by sliding the eyepiece corrector knobTo cancel Quick Start ≥Set to Tape Recording ModeQuick start Open the LCD monitor or extend the viewfinderWhen the cassette holder does not Come out When the cassette holder cannot be HousedInserting/removing a cassette Accidental erasure preventionSelecting a mode How to use the joystickBasic joystick operations Joystick and screen displayTo exit the Help mode Help modeTape Playback Mode Switching the language Using the menu screenAbout the menu setting To exit the menu screenAdjusting the brightness and colour Level Adjusting LCD monitor/viewfinderEVF Brightness of the viewfinder Record mode Check before recordingOn-screen display in the tape recording mode Recording on a tapeRecording check Concerning the remaining tape time Indication on the screenBlank search function Recording a still picture on a tape PhotoshotStopping blank search midway Through Continuous photoshotZoom in/out function Recording yourselfDigital zoom function About the variable speed zoom FunctionTo cancel the colour night view Function Backlight compensation functionColour Night view function To return to normal recordingSoft skin mode To cancel the soft skin modeTo cancel fading Fade in/fade out functionTo cancel the wind noise reduction Function To cancel the Cinema functionWind noise reduction function Recording images for wide-screen TVsTo cancel the image stabilizer function Recording in various situations Scene modeImage stabilizer function Recording in natural colours White balance To cancel the scene mode functionMove the joystick up to select the white balance icon Manual focus adjustment To restore to the automatic AdjustmentTo set the white balance manually About flashing of the indicationManual shutter speed/aperture adjustment To restore to automatic adjustmentShutter speed range Iris/gain value rangePlayback mode To adjust volumeSettings on the audio Playing back tapePlayback on TV Frame-by-frame playbackTo return to normal playback Edit mode Using the DV Cable for Recording Digital DubbingCopying onto a DVD recorder or a VCR Dubbing Stop playback. PlayerTo cancel the standby for recording Using the movie camera as a Web Camera Windows XP SP2Software Using on Macintosh When you use the movie camera as a Web CameraOperating environment on iMovie IMovie HD InterfaceLSQT1174ENG.book 34 ページ 2007年1月29日 月曜日 午後1時28分 Menu Menu listTape Recording Menu Tape Playback MenuMenus related to taking pictures Menus related to playback Other menusOthers IndicationsFunctions cannot be used simultaneously Wrong Tape FormatBefore requesting repair Problems and solutions Auto focus function does not work Remaining tape time indication disappearsDifferent sounds are reproduced at the same time Sounds cannot be played backAbout condensation About dirty heads Clean the heads with the digital video head cleanerAbout the movie camera About the battery Be sure to detach the battery after usePrepare spare batteries when going out for recording Do not throw old battery into fireAbout the cassette About the AC adaptorPeriodical check-ups Explanation of terms Automatic white balanceWhite balance Auto focusSpecifications SpecificationsWeb site http//panasonic.net