LSQT1174ENG.book 7 ページ 2007年1月29日 月曜日 午後1時28分
Before using
Fitting the lens cap
Fit the lens cap to protect the surface of the lens.
1The lens cap and lens cap cord comes preattached to the grip belt.
Pass the end of the lens cap cord through the attached eye on the lens cap. Then pass the lens cap through the loop made by itself and pull tight.
≥When not using the lens cap, pull the lens cap cord in the direction of the arrow. 1
≥When you are not recording, be sure to cover the lens with the lens cap for protection. 2
1 | 2 |
|
≥When you remove the lens cap, press the knobs firmly.
The grip belt
Adjust the belt length so it fits your hand.
1Adjust the belt length.
3
2 1
1Flip the belt.
2Adjust the length.
3 Fix the belt.
7
LSQT1174