LSQT1174ENG.book 32 ページ 2007年1月29日 月曜日 午後1時28分
Edit mode
ªTo cancel the standby for recording
When the camera is standby for recording, move the joystick down and select the [∫] icon.
≥Do not plug or unplug the DV cable during dubbing, or the dubbing may not be completed properly.
≥If a picture (bilingual video, etc.) containing main sound and sub sound has been dubbed, select
the desired sound by [SETUP] >> [AUDIO OUT] on playback.
≥Even if you use a device equipped with DV terminals such as IEEE1394, you may not be able to perform digital dubbing in some cases. For more information, see the instructions for equipment connected.
≥Regardless of the menu settings on the recorder, digital dubbing is carried out in the same mode as the [AUDIO REC] mode of the playback tape.
≥The images on the recorder monitor may be disturbed, but it does not affect the recorded images.
≥If a picture containing a copyright protection signal (copy guard) is recorded by the movie camera, the picture is distorted by
patterns at playback.
≥Disconnect the USB cable since input signals from the external input terminal cannot be recorded while it is connected with the USB cable.
≥When wide images are input, the display such as the menu screen or the operation icon is expanded horizontally.
≥While pictures are input from the DV terminal, the operation icon blinks on instead of appearing from the side of the screen when you press the centre of the joystick.
32
Using the movie camera as a Web Camera
(Windows XP SP2)
To upgrade Windows XP to SP2, click [start] >> [All Programs (Programs)] >> [Windows Update]. If the movie camera is connected to your personal computer, you can send video and sound from the movie camera to the other parties via the network. Audio may also be exchanged if the personal computer is configured accordingly. (You can use the microphone equipped with the personal computer instead of the one on the movie camera.)
Software:
Windows Messenger 5.0/5.1 (Windows XP)
MSN Messenger 7.0/7.5 (Windows 2000/XP)
Windows Live Messenger 8.0 (Windows XP)
DirectX 9.0b/9.0c
ªConnecting the movie camera to personal computer (For using as a
Web Camera)
1Set the movie camera to tape playback mode or tape recording mode.
2Connect the movie camera to personal computer with auxiliary USB connection cable.
1)
2)
3)
1)USB cable
2)USB terminal
3)The Web Camera mode screen
LSQT1174