Panasonic PV-GS320 Wind noise reduction function, Auto Ground-Directional Standby AGS

Page 36

Record mode

ªTo select the color for fade in/fade out

The color which appears in fading pictures can be selected.

1 Set [ADVANCED] >> [FADE COLOR] >> [BLACK] or [WHITE].

While the fade in/fade out function is selected, it takes several seconds to display the image when you start recording images. Besides, it also takes several seconds to pause recording.

Wind noise reduction function

This reduces the wind noise coming into the microphone when recording.

Set to Tape Recording Mode.

1Set [BASIC] >> [WIND CUT] >> [ON].

ªTo cancel the wind noise reduction

function

Set [BASIC] >> [WIND CUT] >> [OFF].

The default setting is [ON].

Reduces the wind noise depending on the wind strength. (If this function is activated in strong winds, the stereo effect may be reduced. When the wind weakens, the stereo effect will be restored.)

Auto Ground-Directional Standby (AGS)

This function prevents unnecessary recording when you forget to pause recording and walk with the Camcorder tilted upside down while recording continues.

If the Camcorder continues to be tilted upside down from the normal horizontal position while recording on a tape, it is automatically put into recording pause.

[AGS]: Auto Ground-Directional Standby Set to Tape Recording Mode.

Set [SETUP] >> [AGS] >> [ON].

ªTo cancel Auto Ground-Directional

Standby

Set [SETUP] >> [AGS] >> [OFF].

The AGS function may activate and cause the Camcorder to pause the recording if you are recording a subject right above or right below you. In these cases, set [AGS] >> [OFF] then continue the recording.

Use the recording start/stop button to pause or stop the recording. The AGS function is only a backup function for when you forget to pause the recording.

The time it takes the Camcorder to be put into recording pause after being tilted upside down varies depending on the operating conditions.

36

LSQT1091

Image 36
Contents Operating Instructions Following mark and symbols are located on bottom of the unit Thank you for choosing PanasonicFollowing Applies only in the U.S.A Important Safety Instructions Battery pack Lithium ion battery pack Button-type battery Lithium batteryButton-type battery Battery packThis AC adaptor operates on AC between 110V and 240 But Before opening the CD-ROM package, please read the following Article 8 Termination of LicenseContents Playback mode Edit modeWith a PC MenuQuick Guide How to turn off the power Recording on a tapeRecording still pictures onto a card Photoshot Playing back tapeAccessories Parts identification and handlingCamcorder Viewfinder -18 USB terminal -50-,-52 DC input terminal DC/C.C.INHow to remove the Sensor tag for U.S.A. only Adjust the belt length and the pad positionAttaching the lens cap Grip beltPower supply Connecting to the AC outletRemoving the battery Charging lampHow to turn on the power While pressing the button 1, set the OFF/ on switch to on≥Set the OFF/ON switch to OFF when not using the Camcorder Charging time and recordable timeSetting date and time Recharging the built-in lithium batteryAbout date/time Using the LCD monitor Using the viewfinderAdjusting the field of view Extending the viewfinderTo cancel Quick Start Set Setup Quick Start OFFQuick Start Open the LCD monitor or extend the ViewfinderWhen the cassette holder does not Come out When the cassette holder cannot be HousedInserting/removing a cassette Inserting/removing a cardSelecting a mode Card access lampConcerning the write protection Switch on the SD Card Concerning the cardHow to use the joystick Tape recording mode AUTO/MANUAL/FOCUS switch is set to AutoBasic joystick operations Joystick and screen displayHelp mode To exit the Help modeSlide show start/pause Delete Playback the next pictureSwitching the language Using the menu screenAbout the menu setting To exit the menu screenAdjusting LCD monitor/viewfinder Operating with remote controlAdjusting the brightness and color Level Order to increase the brightness Entire LCD monitorUsing the remote control Remote controlInstall a button-type battery Remote control usable range Selecting the remote control modeConcerning the button-type battery About auto mode Recording modeCheck before recording Basic Camcorder positioningOn-screen display in the tape recording mode PowersaveRecording on a tape Concerning the remaining tape time Indication on the screenRecording check Blank search functionStopping blank search midway Through Set Advanced Picturesize select the desired picture sizeOn-screen display in the card recording mode Recording still pictures onto a card PhotoshotTo record still pictures clearly Select the size of still pictures to be recorded on a cardConcerning the focusing area Zoom in/out functionSelect the picture quality for Photoshot images Recording with a shutter operation EffectRecording yourself Backlight compensation functionSoft skin mode To cancel the MagicPix functionTo cancel the soft skin mode MagicPix functionTo cancel the tele macro function To cancel fadingTele macro function Fade in/fade out functionTo cancel the wind noise reduction Function To cancel Auto Ground-Directional StandbyWind noise reduction function Auto Ground-Directional Standby AGSSelf-timer recording To stop the timer midway throughTo Cancel the Wide/43 Function Wide/43 functionRecording in various situations Scene mode To cancel the optical image stabilizer FunctionTo Cancel the Guideline Function Optical image stabilizer functionTo cancel the scene mode function To restore to the automatic AdjustmentRecording in natural colors White balance Manual focus adjustment About the black balance adjustmentTo set the white balance manually About flashing of the indicationManual shutter speed/aperture adjustment To restore to automatic adjustmentShutter speed range Iris/gain value rangeTo adjust volume Settings on the audioPlaying back tape Repeat playbackPress the E button or the D button on the remote control Slow-motion playback/ frame-by-frame playbackVariable-speed search function To return to normal playbackPlayback on TV Playing back cardTo display the on-screen information On the TV Deleting files recorded on a card To display multiple playback filesAbout the compatibility of still pictures To delete all filesWriting the printing data on a card Dpof setting Formatting a cardProtecting files on a card Recording from a tape onto a card Copying onto a DVD recorder or a VCR DubbingUsing the DV Interface Cable for Recording Digital Dubbing To cancel the standby for recording Audio dubbingYou can add music or narration to the recorded cassette ≥Set to Tape Recording Mode PC Connection With DV Interface CableBefore recording with audio dubbing To play back the sound recorded with Audio dubbingWhen you stop printing halfway Using the Camcorder with a PC Software InstallationCheck before Use Connecting Computer Camcorder Using the Built-in SD DriveOperating environment For WindowsUsing as a Web camera Installing USB DriverOperating environment Setting up Windows Messenger Usual operation WEB Camera mode Tape Playback ModeSet Advanced USB Function WEB CAM Setting up MSN Messenger Windows Live Messenger Click Sign Type in your Sign-in name and passwordType in your E-mail address and password Case of MSN MessengerUsing Quick Movie Magic or MotionDV Studio SoundHard disk Necessary software DirectX 9.0b/9.0cInstallation of Quick Movie Magic MotionDV Studio To start Quick Movie Magic or MotionDV StudioClick the Quick Movie Magic/ MotionDV Studio Click Next Click Finish≥Update the driver with the following procedure Click Update DriverIf a description other than Microsoft is displayed Using on Macintosh To disconnect USB cable safelyOperating environment on iMovie IMovie HD Copying still pictures on PCIf you no longer need software or driver Uninstall With a PC ≥When Camcorder power is turned OFF≥When Mode Dial is turned to change modes When using on MacintoshAbout the SD Card About the compatibility of the card FilesFiles recorded on a SD Card Menu list Tape Recording MenuTape Playback Menu MenuCard Recording Menu Card Playback MenuAdvanced O.I.S. -38-GUIDE Lines -38-SHTR Effect Basic DATE/TIME -65-PROTECTMenus related to taking pictures Menus related to playbackOther menus Indications Basic indicationsRecording indications Playback indicationsConfirmatory indications Textual indicationsFunctions that cannot be used simultaneously There is no ink. Check the connected printerThere is no paper. Check the connected printer Check the connected printerBefore requesting repair Problems and solutions Original sound was erased when audio dubbing was performed Cassette cannot be insertedAuto focus function does not work Camcorder arbitrarily stops recordingPush the Reset Switch is displayed Card Recorded pictures are not clearPhotoshot playback images do not look Normal Even if a card is formatted, it cannot be usedAbout condensation About dirty headsAbout the Camcorder About the battery Be sure to detach the battery after usePrepare spare batteries when going out for recording Do not throw old battery into fireAbout the AC adaptor About the cassetteAbout the card Folder structure of the cardExplanation of terms Periodical check-upsAutomatic white balance LCD monitorWhite balance Auto focusSpecifications Http//panasonic.co.jp/pavc/global/csMode Camcorder Accessory System Accessory# DescriptionCamcorder Accessory Order Form For USA Customers VisaRequest for Service Notice Request for Service Notice USA OnlyLimited Warranty For USA Customers Panasonic Video ProductsCustomer Services Directory Accessory PurchasesCentralized Factory Service Center Npcparts@us.panasonic.comWarranty For Canadian Customers Panasonic Canada IncAmbler Drive, Mississauga, Ontario L4W 2T3 Camcorder Product One 1 year, parts and labourIndex NumericsSpanish Quick Use Guide Guía española para el uso rápido Cómo apagar la alimentación Grabación en una cintaGrabación de imágenes fijas en una Tarjeta Photoshot Reproducción de la cintaF1106Ak0