Panasonic PV-GS320 Selecting a mode, Concerning the card, Card access lamp, SD Card

Page 21

Before using

3Insert/remove the card into/from the card slot.

1

≥When inserting a card, face the label side 1 towards you and push it straight in with one stroke as far as it goes.

≥When removing the card, press the center of the card and then pull it straight out.

4Securely close the card slot cover.

ªConcerning the card

≥Do not format the card with another

Camcorder or any personal computer. This operation may make the card unusable.

≥4 GB Memory Cards must be SDHC Memory Cards.

≥Memory Cards greater than 4 GB without the SDHC Logo are not compliant with the SD specifications.

ªCard access lamp

≥When the Camcorder accesses the card (reading, recording, playback, erasing, etc.), the access lamp lights up.

≥If the following operations are performed when the access lamp is lit, then the card or the recorded data may be damaged or the Camcorder may malfunction.

≥Inserting or removing the card.

≥Operating the [OFF/ON] switch or the mode dial.

≥Removing the battery or AC adaptor.

ªSD Card

≥The memory capacity indicated on the SD Card label corresponds to the total amount of capacity to protect and manage the copyright and the capacity available as conventional memory for a Camcorder, personal computer or other equipment.

This unit is compatible with both SD Memory cards and SDHC Memory cards. You can only use SDHC Memory cards on devices that are compatible with them. You cannot use SDHC Memory cards on devices that are only compatible with SD Memory cards. (When using a SDHC Memory card on another device, be sure to read the operating instructions for that device.)

ªConcerning the write protection

switch on the SD Card

≥The SD Card has a write protection switch on it. If the switch is moved to [LOCK], you cannot write to the card, erase the data on it or format it. If it is moved back, you can.

Selecting a mode

Rotate the mode dial to select the desired mode.

1Rotate the mode dial.

≥Set your desired mode to 1.

1

Joystick

: TAPE RECORDING MODE

Use this when you record the image on a tape. (Also, you can simultaneously record still pictures on a card while recording images on a tape.)

: TAPE PLAYBACK MODE

Use this to play back a tape.

: CARD RECORDING MODE

Use this to record still pictures on a card.

: CARD PLAYBACK MODE

Use this to play back the still pictures recorded on a card.

PC : PC CONNECTION MODE

You can view or edit the still pictures recorded on a card on your personal computer. -53-

21

LSQT1091

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Operating Instructions Thank you for choosing Panasonic Following mark and symbols are located on bottom of the unitFollowing Applies only in the U.S.A Important Safety Instructions Button-type battery Lithium battery Battery pack Lithium ion battery packButton-type battery Battery packThis AC adaptor operates on AC between 110V and 240 But Article 8 Termination of License Before opening the CD-ROM package, please read the followingContents Edit mode Playback modeWith a PC MenuQuick Guide Recording on a tape How to turn off the powerRecording still pictures onto a card Photoshot Playing back tapeAccessories Parts identification and handlingCamcorder USB terminal -50-,-52 DC input terminal DC/C.C.IN Viewfinder -18Adjust the belt length and the pad position How to remove the Sensor tag for U.S.A. onlyAttaching the lens cap Grip beltConnecting to the AC outlet Power supplyRemoving the battery Charging lampWhile pressing the button 1, set the OFF/ on switch to on How to turn on the power≥Set the OFF/ON switch to OFF when not using the Camcorder Charging time and recordable timeSetting date and time Recharging the built-in lithium batteryAbout date/time Using the viewfinder Using the LCD monitorAdjusting the field of view Extending the viewfinderSet Setup Quick Start OFF To cancel Quick StartQuick Start Open the LCD monitor or extend the ViewfinderWhen the cassette holder cannot be Housed When the cassette holder does not Come outInserting/removing a cassette Inserting/removing a cardCard access lamp Selecting a modeConcerning the write protection Switch on the SD Card Concerning the cardTape recording mode AUTO/MANUAL/FOCUS switch is set to Auto How to use the joystickBasic joystick operations Joystick and screen displayTo exit the Help mode Help modeSlide show start/pause Delete Playback the next pictureUsing the menu screen Switching the languageAbout the menu setting To exit the menu screenOperating with remote control Adjusting LCD monitor/viewfinderAdjusting the brightness and color Level Order to increase the brightness Entire LCD monitorUsing the remote control Remote controlInstall a button-type battery Remote control usable range Selecting the remote control modeConcerning the button-type battery Recording mode About auto modeCheck before recording Basic Camcorder positioningPowersave On-screen display in the tape recording modeRecording on a tape Concerning the remaining tape time Indication on the screenBlank search function Recording checkStopping blank search midway Through Set Advanced Picturesize select the desired picture sizeRecording still pictures onto a card Photoshot On-screen display in the card recording modeTo record still pictures clearly Select the size of still pictures to be recorded on a cardZoom in/out function Concerning the focusing areaSelect the picture quality for Photoshot images Recording with a shutter operation EffectBacklight compensation function Recording yourselfTo cancel the MagicPix function Soft skin modeTo cancel the soft skin mode MagicPix functionTo cancel fading To cancel the tele macro functionTele macro function Fade in/fade out functionTo cancel Auto Ground-Directional Standby To cancel the wind noise reduction FunctionWind noise reduction function Auto Ground-Directional Standby AGSTo stop the timer midway through Self-timer recordingTo Cancel the Wide/43 Function Wide/43 functionTo cancel the optical image stabilizer Function Recording in various situations Scene modeTo Cancel the Guideline Function Optical image stabilizer functionTo cancel the scene mode function To restore to the automatic AdjustmentRecording in natural colors White balance About the black balance adjustment Manual focus adjustmentTo set the white balance manually About flashing of the indicationTo restore to automatic adjustment Manual shutter speed/aperture adjustmentShutter speed range Iris/gain value rangeSettings on the audio To adjust volumePlaying back tape Repeat playbackSlow-motion playback/ frame-by-frame playback Press the E button or the D button on the remote controlVariable-speed search function To return to normal playbackPlayback on TV Playing back cardTo display the on-screen information On the TV To display multiple playback files Deleting files recorded on a cardAbout the compatibility of still pictures To delete all filesWriting the printing data on a card Dpof setting Formatting a cardProtecting files on a card Copying onto a DVD recorder or a VCR Dubbing Recording from a tape onto a cardUsing the DV Interface Cable for Recording Digital Dubbing To cancel the standby for recording Audio dubbingYou can add music or narration to the recorded cassette PC Connection With DV Interface Cable ≥Set to Tape Recording ModeBefore recording with audio dubbing To play back the sound recorded with Audio dubbingWhen you stop printing halfway Using the Camcorder with a PC Software InstallationCheck before Use Using the Built-in SD Drive Connecting Computer CamcorderOperating environment For WindowsUsing as a Web camera Installing USB DriverOperating environment Setting up Windows Messenger Usual operation WEB Camera mode Tape Playback ModeSet Advanced USB Function WEB CAM Click Sign Type in your Sign-in name and password Setting up MSN Messenger Windows Live MessengerType in your E-mail address and password Case of MSN MessengerSound Using Quick Movie Magic or MotionDV StudioHard disk Necessary software DirectX 9.0b/9.0cTo start Quick Movie Magic or MotionDV Studio Installation of Quick Movie Magic MotionDV StudioClick the Quick Movie Magic/ MotionDV Studio Click Next Click Finish≥Update the driver with the following procedure Click Update DriverIf a description other than Microsoft is displayed To disconnect USB cable safely Using on MacintoshOperating environment on iMovie IMovie HD Copying still pictures on PCWith a PC ≥When Camcorder power is turned OFF If you no longer need software or driver Uninstall≥When Mode Dial is turned to change modes When using on MacintoshAbout the SD Card About the compatibility of the card FilesFiles recorded on a SD Card Tape Recording Menu Menu listTape Playback Menu MenuCard Playback Menu Card Recording MenuAdvanced O.I.S. -38-GUIDE Lines -38-SHTR Effect Basic DATE/TIME -65-PROTECTMenus related to taking pictures Menus related to playbackOther menus Basic indications IndicationsRecording indications Playback indicationsTextual indications Confirmatory indicationsThere is no ink. Check the connected printer Functions that cannot be used simultaneouslyThere is no paper. Check the connected printer Check the connected printerBefore requesting repair Problems and solutions Cassette cannot be inserted Original sound was erased when audio dubbing was performedAuto focus function does not work Camcorder arbitrarily stops recordingCard Recorded pictures are not clear Push the Reset Switch is displayedPhotoshot playback images do not look Normal Even if a card is formatted, it cannot be usedAbout condensation About dirty headsAbout the Camcorder Be sure to detach the battery after use About the batteryPrepare spare batteries when going out for recording Do not throw old battery into fireAbout the cassette About the AC adaptorAbout the card Folder structure of the cardPeriodical check-ups Explanation of termsAutomatic white balance LCD monitorAuto focus White balanceHttp//panasonic.co.jp/pavc/global/cs SpecificationsMode Accessory# Description Camcorder Accessory SystemVisa Camcorder Accessory Order Form For USA CustomersRequest for Service Notice USA Only Request for Service NoticePanasonic Video Products Limited Warranty For USA CustomersAccessory Purchases Customer Services DirectoryCentralized Factory Service Center Npcparts@us.panasonic.comPanasonic Canada Inc Warranty For Canadian CustomersAmbler Drive, Mississauga, Ontario L4W 2T3 Camcorder Product One 1 year, parts and labourNumerics IndexSpanish Quick Use Guide Guía española para el uso rápido Grabación en una cinta Cómo apagar la alimentaciónGrabación de imágenes fijas en una Tarjeta Photoshot Reproducción de la cintaF1106Ak0
Top Page Image Contents