Panasonic PV-GS320 operating instructions Confirmatory indications, Textual indications

Page 67

Others

≥For images not recorded with this unit, the number of horizontal and vertical pixels may differ so the image size is not displayed.

Warning/alarm indications

If any one of the following indications lights up or flashes, please check the Camcorder.

Confirmatory indications

Y: A cassette with the accidental erasure prevention slider placed in the [SAVE] position is inserted.

No cassette is inserted. [--]/0:

The built-in battery is low. -17-

°: The warning/alarm indication appears when you record yourself. Turn the LCD monitor towards the viewfinder and check the warning/alarm indication.

: No card is inserted.

REMOTE :

An incorrect remote control mode has been selected. -27-

2END:

The tape came to the end during recording. :: The video heads are dirty. -72-

Textual indications

3DEW DETECT/3EJECT TAPE: Condensation has occurred. Take out the cassette and wait for a while. It takes some time until the cassette holder opens, but this is not a malfunction. -72-

LOW BATTERY:

The battery is low. Recharge it. -15-

NO TAPE :

No tape is inserted. -20-

TAPE END:

The tape came to the end during recording.

CHECK REC TAB:

You are attempting to record pictures on a tape with the accidental erasure prevention slider placed in the [SAVE] position.

You are attempting audio dubbing or digital dubbing on a tape with the accidental erasure prevention slider placed in the [SAVE] position. -20-

CHECK REMOTE MODE:

An incorrect remote control mode has been selected. This is only displayed at the first operation of the remote control after powering-on. -27-

WRONG TAPE FORMAT:

You are attempting to play back a tape section that has been recorded with a different TV system. This cassette is incompatible.

UNPLAYABLE CARD:

You are attempting to play back data not compatible with this Camcorder.

CLOSE CASSETTE DOOR:

The cassette cover is open. Close the cassette cover. -20-

UNABLE TO A.DUB (LP RECORDED): Audio dubbing cannot be performed because the original recording was in LP mode.

UNABLE TO A.DUB:

You are attempting to perform audio dubbing on a non-recorded tape.

CANNOT RECORD IN AGS MODE: The AGS function is activated. -36-

COPY PROTECTED:

Images cannot be recorded correctly because the medium is protected by a copy guard.

CARD ERROR:

This card is not compatible with this Camcorder.

You are attempting to format a failed card. This message is displayed when you attempt to insert an incompatible card into the Card Slot.

NO CARD:

No card is inserted.

CARD FULL:

Card does not have sufficient memory remaining.

Select Card Playback Mode and delete unnecessary files.

NO DATA:

There are no any recorded files on the card.

FILE LOCKED:

You are attempting to erase protected files.

CARD LOCKED:

The write protection switch on the SD Card is set to [LOCK].

NEED HEAD CLEANING:

The video heads are dirty. -72-

PUSH THE RESET SWITCH:

An irregularity in the equipment has been detected. Press the [RESET] button (-71-). This may solve the problem.

67

LSQT1091

Page 66 Page 68
Image 67
Page 66 Page 68
Contents Operating Instructions Thank you for choosing Panasonic Following mark and symbols are located on bottom of the unitFollowing Applies only in the U.S.A Important Safety Instructions Button-type battery Lithium battery Battery pack Lithium ion battery packBattery pack Button-type batteryThis AC adaptor operates on AC between 110V and 240 But Article 8 Termination of License Before opening the CD-ROM package, please read the followingContents Menu Playback modeEdit mode With a PCQuick Guide Playing back tape How to turn off the powerRecording on a tape Recording still pictures onto a card PhotoshotParts identification and handling AccessoriesCamcorder USB terminal -50-,-52 DC input terminal DC/C.C.IN Viewfinder -18Grip belt How to remove the Sensor tag for U.S.A. onlyAdjust the belt length and the pad position Attaching the lens capCharging lamp Power supplyConnecting to the AC outlet Removing the batteryCharging time and recordable time How to turn on the powerWhile pressing the button 1, set the OFF/ on switch to on ≥Set the OFF/ON switch to OFF when not using the CamcorderRecharging the built-in lithium battery Setting date and timeAbout date/time Extending the viewfinder Using the LCD monitorUsing the viewfinder Adjusting the field of viewOpen the LCD monitor or extend the Viewfinder To cancel Quick StartSet Setup Quick Start OFF Quick StartInserting/removing a card When the cassette holder does not Come outWhen the cassette holder cannot be Housed Inserting/removing a cassetteConcerning the card Selecting a modeCard access lamp Concerning the write protection Switch on the SD CardJoystick and screen display How to use the joystickTape recording mode AUTO/MANUAL/FOCUS switch is set to Auto Basic joystick operationsPlayback the next picture Help modeTo exit the Help mode Slide show start/pause DeleteTo exit the menu screen Switching the languageUsing the menu screen About the menu settingOrder to increase the brightness Entire LCD monitor Adjusting LCD monitor/viewfinderOperating with remote control Adjusting the brightness and color LevelRemote control Using the remote controlInstall a button-type battery Selecting the remote control mode Remote control usable rangeConcerning the button-type battery Basic Camcorder positioning About auto modeRecording mode Check before recordingConcerning the remaining tape time Indication on the screen On-screen display in the tape recording modePowersave Recording on a tapeSet Advanced Picturesize select the desired picture size Recording checkBlank search function Stopping blank search midway ThroughSelect the size of still pictures to be recorded on a card On-screen display in the card recording modeRecording still pictures onto a card Photoshot To record still pictures clearlyRecording with a shutter operation Effect Concerning the focusing areaZoom in/out function Select the picture quality for Photoshot imagesBacklight compensation function Recording yourselfMagicPix function Soft skin modeTo cancel the MagicPix function To cancel the soft skin modeFade in/fade out function To cancel the tele macro functionTo cancel fading Tele macro functionAuto Ground-Directional Standby AGS To cancel the wind noise reduction FunctionTo cancel Auto Ground-Directional Standby Wind noise reduction functionWide/43 function Self-timer recordingTo stop the timer midway through To Cancel the Wide/43 FunctionOptical image stabilizer function Recording in various situations Scene modeTo cancel the optical image stabilizer Function To Cancel the Guideline FunctionTo restore to the automatic Adjustment To cancel the scene mode functionRecording in natural colors White balance About flashing of the indication Manual focus adjustmentAbout the black balance adjustment To set the white balance manuallyIris/gain value range Manual shutter speed/aperture adjustmentTo restore to automatic adjustment Shutter speed rangeRepeat playback To adjust volumeSettings on the audio Playing back tapeTo return to normal playback Press the E button or the D button on the remote controlSlow-motion playback/ frame-by-frame playback Variable-speed search functionPlaying back card Playback on TVTo display the on-screen information On the TV To delete all files Deleting files recorded on a cardTo display multiple playback files About the compatibility of still picturesFormatting a card Writing the printing data on a card Dpof settingProtecting files on a card Copying onto a DVD recorder or a VCR Dubbing Recording from a tape onto a cardUsing the DV Interface Cable for Recording Digital Dubbing Audio dubbing To cancel the standby for recordingYou can add music or narration to the recorded cassette To play back the sound recorded with Audio dubbing ≥Set to Tape Recording ModePC Connection With DV Interface Cable Before recording with audio dubbingWhen you stop printing halfway Software Installation Using the Camcorder with a PCCheck before Use For Windows Connecting Computer CamcorderUsing the Built-in SD Drive Operating environmentInstalling USB Driver Using as a Web cameraOperating environment Usual operation WEB Camera mode Tape Playback Mode Setting up Windows MessengerSet Advanced USB Function WEB CAM Case of MSN Messenger Setting up MSN Messenger Windows Live MessengerClick Sign Type in your Sign-in name and password Type in your E-mail address and passwordNecessary software DirectX 9.0b/9.0c Using Quick Movie Magic or MotionDV StudioSound Hard diskClick Finish Installation of Quick Movie Magic MotionDV StudioTo start Quick Movie Magic or MotionDV Studio Click the Quick Movie Magic/ MotionDV Studio Click NextClick Update Driver ≥Update the driver with the following procedureIf a description other than Microsoft is displayed Copying still pictures on PC Using on MacintoshTo disconnect USB cable safely Operating environment on iMovie IMovie HDWhen using on Macintosh If you no longer need software or driver UninstallWith a PC ≥When Camcorder power is turned OFF ≥When Mode Dial is turned to change modesAbout the compatibility of the card Files About the SD CardFiles recorded on a SD Card Menu Menu listTape Recording Menu Tape Playback MenuBasic DATE/TIME -65-PROTECT Card Recording MenuCard Playback Menu Advanced O.I.S. -38-GUIDE Lines -38-SHTR EffectMenus related to playback Menus related to taking picturesOther menus Playback indications IndicationsBasic indications Recording indicationsTextual indications Confirmatory indicationsCheck the connected printer Functions that cannot be used simultaneouslyThere is no ink. Check the connected printer There is no paper. Check the connected printerBefore requesting repair Problems and solutions Camcorder arbitrarily stops recording Original sound was erased when audio dubbing was performedCassette cannot be inserted Auto focus function does not workEven if a card is formatted, it cannot be used Push the Reset Switch is displayedCard Recorded pictures are not clear Photoshot playback images do not look NormalAbout dirty heads About condensationAbout the Camcorder Do not throw old battery into fire About the batteryBe sure to detach the battery after use Prepare spare batteries when going out for recordingFolder structure of the card About the AC adaptorAbout the cassette About the cardLCD monitor Explanation of termsPeriodical check-ups Automatic white balanceAuto focus White balanceHttp//panasonic.co.jp/pavc/global/cs SpecificationsMode Accessory# Description Camcorder Accessory SystemVisa Camcorder Accessory Order Form For USA CustomersRequest for Service Notice USA Only Request for Service NoticePanasonic Video Products Limited Warranty For USA CustomersNpcparts@us.panasonic.com Customer Services DirectoryAccessory Purchases Centralized Factory Service CenterCamcorder Product One 1 year, parts and labour Warranty For Canadian CustomersPanasonic Canada Inc Ambler Drive, Mississauga, Ontario L4W 2T3Numerics IndexSpanish Quick Use Guide Guía española para el uso rápido Reproducción de la cinta Cómo apagar la alimentaciónGrabación en una cinta Grabación de imágenes fijas en una Tarjeta PhotoshotF1106Ak0
Top Page Image Contents