Panasonic PV-GS320 Using Quick Movie Magic or MotionDV Studio, Sound, Hard disk, Click OK

Page 57

With a PC

Using Quick Movie Magic or MotionDV STUDIO

When the OS is Windows 2000/XP, the Camcorder can be connected to the personal computer with the DV cable.

When the OS is Windows 2000/XP, the Camcorder can be connected to the personal computer with the USB cable. However, when the OS is Windows 2000, USB driver must be installed.

≥Do not connect the USB cable until the USB driver is installed.

ªOperating environment

OS:

IBM PC/AT compatible personal computer with pre-installed;

Microsoft Windows XP Home Edition/ Professional SP2

Microsoft Windows 2000 Professional SP4

CPU:

Intel Pentium III 800 MHz or higher (including compatible CPU)

Graphic display:

High Color (16 bit) or more (32 bit recommended)

Desktop resolution of 1024k768 pixels or more (Supporting the overlay of DirectDraw)

Sound:

PCM sound source (Compatible DirectSound)

RAM:

256 MB or more

(Adding more memory enables you to operate the personal computer more comfortably.)

Hard disk:

Ultra DMA – 33 or more

Free hard disk space:

640 MB or more

(When you capture video, 1 GB is needed for data of approx. 4 minutes.)

Interface:

DV (IEEE1394) terminal (IEEE1394.a) USB terminal (Hi-Speed USB (USB 2.0) compliant) (A type)

Necessary software: DirectX 9.0b/9.0c

Windows Media Player 6.4 to 10

Other requirements: Mouse

≥This software is not compatible with a multi-

CPU environment.

≥This software is not compatible with a multi-boot

environment.

≥Operation on Microsoft Windows XP Media Center Edition, Tablet PC Edition and 64 bit operating system is not guaranteed.

ªInstalling USB Driver

Install this when your OS is Windows 2000 SP4. (When your OS is Windows XP SP2, installing USB driver is not needed.) USB Driver must be installed when you connect the Camcorder to the PC with the USB cable and use Quick Movie Magic or MotionDV STUDIO.

DirectX 9.0b is installed in your PC if it is not installed beforehand.

≥When DirectX 9.0b is installed, applications supported by previous versions of DirectX may not run. In this case, consult the manufacturers of the applications disabled.

1Insert the supplied CD-ROM into the personal computer’s CD-ROM drive.

≥Quit all applications. ≥[Setup Menu] appears.

2Click [USB Driver].

≥The set up program starts running.

3Depending on your system environment, installation of “DirectX9.0b” may be required. Click [Yes] and continue with installation.

≥After “DirectX 9.0b” is installed, the computer will restart.

≥Do not remove the CD-ROM.

≥Installation may take a little while.

4 Finish installation by following the on-screen instructions.

≥Click [Next] and proceed with installation. ≥After completing the installation, Click

[Finish].

5Click [OK].

57

LSQT1091

Page 56 Page 58
Image 57
Page 56 Page 58
Contents Operating Instructions Thank you for choosing Panasonic Following mark and symbols are located on bottom of the unitFollowing Applies only in the U.S.A Important Safety Instructions Button-type battery Lithium battery Battery pack Lithium ion battery packButton-type battery Battery packThis AC adaptor operates on AC between 110V and 240 But Article 8 Termination of License Before opening the CD-ROM package, please read the followingContents Edit mode Playback modeWith a PC MenuQuick Guide Recording on a tape How to turn off the powerRecording still pictures onto a card Photoshot Playing back tapeAccessories Parts identification and handlingCamcorder USB terminal -50-,-52 DC input terminal DC/C.C.IN Viewfinder -18Adjust the belt length and the pad position How to remove the Sensor tag for U.S.A. onlyAttaching the lens cap Grip beltConnecting to the AC outlet Power supplyRemoving the battery Charging lampWhile pressing the button 1, set the OFF/ on switch to on How to turn on the power≥Set the OFF/ON switch to OFF when not using the Camcorder Charging time and recordable timeSetting date and time Recharging the built-in lithium batteryAbout date/time Using the viewfinder Using the LCD monitorAdjusting the field of view Extending the viewfinderSet Setup Quick Start OFF To cancel Quick StartQuick Start Open the LCD monitor or extend the ViewfinderWhen the cassette holder cannot be Housed When the cassette holder does not Come outInserting/removing a cassette Inserting/removing a cardCard access lamp Selecting a modeConcerning the write protection Switch on the SD Card Concerning the cardTape recording mode AUTO/MANUAL/FOCUS switch is set to Auto How to use the joystickBasic joystick operations Joystick and screen displayTo exit the Help mode Help modeSlide show start/pause Delete Playback the next pictureUsing the menu screen Switching the languageAbout the menu setting To exit the menu screenOperating with remote control Adjusting LCD monitor/viewfinderAdjusting the brightness and color Level Order to increase the brightness Entire LCD monitorUsing the remote control Remote controlInstall a button-type battery Remote control usable range Selecting the remote control modeConcerning the button-type battery Recording mode About auto modeCheck before recording Basic Camcorder positioningPowersave On-screen display in the tape recording modeRecording on a tape Concerning the remaining tape time Indication on the screenBlank search function Recording checkStopping blank search midway Through Set Advanced Picturesize select the desired picture sizeRecording still pictures onto a card Photoshot On-screen display in the card recording modeTo record still pictures clearly Select the size of still pictures to be recorded on a cardZoom in/out function Concerning the focusing areaSelect the picture quality for Photoshot images Recording with a shutter operation EffectBacklight compensation function Recording yourselfTo cancel the MagicPix function Soft skin modeTo cancel the soft skin mode MagicPix functionTo cancel fading To cancel the tele macro functionTele macro function Fade in/fade out functionTo cancel Auto Ground-Directional Standby To cancel the wind noise reduction FunctionWind noise reduction function Auto Ground-Directional Standby AGSTo stop the timer midway through Self-timer recordingTo Cancel the Wide/43 Function Wide/43 functionTo cancel the optical image stabilizer Function Recording in various situations Scene modeTo Cancel the Guideline Function Optical image stabilizer functionTo cancel the scene mode function To restore to the automatic AdjustmentRecording in natural colors White balance About the black balance adjustment Manual focus adjustmentTo set the white balance manually About flashing of the indicationTo restore to automatic adjustment Manual shutter speed/aperture adjustmentShutter speed range Iris/gain value rangeSettings on the audio To adjust volumePlaying back tape Repeat playbackSlow-motion playback/ frame-by-frame playback Press the E button or the D button on the remote controlVariable-speed search function To return to normal playbackPlayback on TV Playing back cardTo display the on-screen information On the TV To display multiple playback files Deleting files recorded on a cardAbout the compatibility of still pictures To delete all filesWriting the printing data on a card Dpof setting Formatting a cardProtecting files on a card Copying onto a DVD recorder or a VCR Dubbing Recording from a tape onto a cardUsing the DV Interface Cable for Recording Digital Dubbing To cancel the standby for recording Audio dubbingYou can add music or narration to the recorded cassette PC Connection With DV Interface Cable ≥Set to Tape Recording ModeBefore recording with audio dubbing To play back the sound recorded with Audio dubbingWhen you stop printing halfway Using the Camcorder with a PC Software InstallationCheck before Use Using the Built-in SD Drive Connecting Computer CamcorderOperating environment For WindowsUsing as a Web camera Installing USB DriverOperating environment Setting up Windows Messenger Usual operation WEB Camera mode Tape Playback ModeSet Advanced USB Function WEB CAM Click Sign Type in your Sign-in name and password Setting up MSN Messenger Windows Live MessengerType in your E-mail address and password Case of MSN MessengerSound Using Quick Movie Magic or MotionDV StudioHard disk Necessary software DirectX 9.0b/9.0cTo start Quick Movie Magic or MotionDV Studio Installation of Quick Movie Magic MotionDV StudioClick the Quick Movie Magic/ MotionDV Studio Click Next Click Finish≥Update the driver with the following procedure Click Update DriverIf a description other than Microsoft is displayed To disconnect USB cable safely Using on MacintoshOperating environment on iMovie IMovie HD Copying still pictures on PCWith a PC ≥When Camcorder power is turned OFF If you no longer need software or driver Uninstall≥When Mode Dial is turned to change modes When using on MacintoshAbout the SD Card About the compatibility of the card FilesFiles recorded on a SD Card Tape Recording Menu Menu listTape Playback Menu MenuCard Playback Menu Card Recording MenuAdvanced O.I.S. -38-GUIDE Lines -38-SHTR Effect Basic DATE/TIME -65-PROTECTMenus related to taking pictures Menus related to playbackOther menus Basic indications IndicationsRecording indications Playback indicationsTextual indications Confirmatory indicationsThere is no ink. Check the connected printer Functions that cannot be used simultaneouslyThere is no paper. Check the connected printer Check the connected printerBefore requesting repair Problems and solutions Cassette cannot be inserted Original sound was erased when audio dubbing was performedAuto focus function does not work Camcorder arbitrarily stops recordingCard Recorded pictures are not clear Push the Reset Switch is displayedPhotoshot playback images do not look Normal Even if a card is formatted, it cannot be usedAbout condensation About dirty headsAbout the Camcorder Be sure to detach the battery after use About the batteryPrepare spare batteries when going out for recording Do not throw old battery into fireAbout the cassette About the AC adaptorAbout the card Folder structure of the cardPeriodical check-ups Explanation of termsAutomatic white balance LCD monitorAuto focus White balanceHttp//panasonic.co.jp/pavc/global/cs SpecificationsMode Accessory# Description Camcorder Accessory SystemVisa Camcorder Accessory Order Form For USA CustomersRequest for Service Notice USA Only Request for Service NoticePanasonic Video Products Limited Warranty For USA CustomersAccessory Purchases Customer Services DirectoryCentralized Factory Service Center Npcparts@us.panasonic.comPanasonic Canada Inc Warranty For Canadian CustomersAmbler Drive, Mississauga, Ontario L4W 2T3 Camcorder Product One 1 year, parts and labourNumerics IndexSpanish Quick Use Guide Guía española para el uso rápido Grabación en una cinta Cómo apagar la alimentaciónGrabación de imágenes fijas en una Tarjeta Photoshot Reproducción de la cintaF1106Ak0
Top Page Image Contents