Panasonic WV-CW484F operating instructions Specifications, General specifications, Camera

Specifications

General specifications
Power source and power	24 V AC 60 Hz, 11 W (With heater), 12 V DC 470 mA
consumption:
Ambient temperature:	–10 °C - +50 °C {14 °F to 122 °F}
	–30 °C - +50 °C {–22 °F to 122 °F}*
Ambient humidity:	90 % or less
Water resistance:	IEC60529 (IP66, Against ingress of water with harmful effects
	powerful jetting)** (Camera unit)
Dimensions:	ø154 mm (W) x 141.2 mm (H)
	{ø6.06" (W) x 5.55" (H)} (excluding connectors/terminals)
Weight:	Camera: Approx. 1.3 kg {2.87 lbs.}
	Camera attachment: Approx. 100 g {0.22 lbs.}

*With Heater Unit WV-CW4H (option)

**Applicable only when the installation and waterproof process are done properly

Camera
Image sensor:	1/3" interline transfer CCD
Effective pixels:	768 (H) x 494 (V)
Scanning area:	4.8 mm (H) x 3.6 mm (V)
Scanning method:	2:1 interlace scan
Scanning frequency	Horizontal: 15.734 kHz
	Vertical: 59.94 Hz
Resolution:	Horizontal 480 TV lines (C/L Normal), 540 TV lines typ., 520 TV
	lines min. (C/L High), 570 TV lines (B/W)
Signal-to-noise ratio:	50 dB (Equivalent to AGC Off, weight On)
Dynamic range:	52 dB typ
Minimum illumination:	1.5 lx { x.xx footcandle} at F1.4 (C/L),
	0.16 lx {x.xx footcandle} at F1.4 (B/W),
Video output:	VBS 1.0 V [P-P] NTSC composite 75 Ω/BNC connector
Lens mount:	CS-mount

Major items on menu setup (Factory default settings are underlined.)

Language:	English, French, German, Spanish, Italian, Russian, Japanese, or
	Chinese
Camera ID:	Up to 16 characters
Light control	ALC
Super Dynamic 3:	ON or OFF
Electronic shutter speed:	OFF (1/60), 1/100, 1/250, 1/500, 1/1 000,1/2 000, 1/4 000,
	1/10 000 s
AGC:	ON (HIGH/MID/LOW), or OFF
Sensitivity enhancement:	OFF, x2 AUTO, x4 AUTO, x6 AUTO, x10 AUTO, x2 FIX, x4 FIX,
	x6 FIX, x10 FIX, x16 FIX, x32 FIX
Synchronization:	Multiplexed vertical drive (VD2), Line-locked, or Internal
White balance:	ATW1, ATW2, or AWC
Motion detection:	MODE1, MODE2, or OFF

47