Panasonic WV-CW484F Aperture Gain Setting AP Gain, Pedestal Level Setting Pedestal

Page 43

18-2. Aperture Gain Setting (AP GAIN)

Move the "I" cursor to adjust the aperture gain level.

Lower the level when moire (a kind of noise, optical interference) appears on the screen as part of minute crosshatch pattern, etc.

18-3. Pedestal Level Setting (PEDESTAL)

Move the "I" cursor to adjust the pedestal level (black level).

18-4. Chroma Phase (Hue) Setting (HUE)

1.Move the cursor to HUE.

2.Move the "I" cursor to adjust the hue (chroma phase) level.

18-5. Pixel Compensation Setting (PIX OFF)

Perform settings to compensate a maximum of 16 blemish pixels on the pickup device.

1.Select PIX OFF and press SET.

→The PIX OFF menu opens with numbers from 1 to 16.

2.Select a number and press SET.

→The PIX OFF assignment screen opens with a + cursor.

3.Move the cursor to the center of a blemish position until its appearance becomes less obvious. Finally, press SET.

→The horizontal and vertical positions (coor- dinate) of the blemish will be displayed with a 6-digit number on the second bot- tom line.

→The blemish position is registered to be compensated.

→The screen returns to the PIX OFF menu that displays the number followed by an asterisk if it has been registered.

4.Repeat above steps as necessary.

		PIX OFF
		2	3	4
	1
	5	6	7	8
9		10	11	12
13		14	15	16

000000

RET TOP END

5.To cancel a registration, select an asterisked number in the PIX OFF menu and press SET.

→The PIX OFF assignment screen opens.

Hold down the the [LEFT] and [RIGHT] buttons simultaneously for 2 seconds or more.

→The PIX OFF menu appears displaying the number without an asterisk if its registration has been cancelled.

43

Image 43

Contents Model No. WV-CW484 Series Do not Remove Cover or Back No USER-SERVICEABLE Parts Inside Important Safety Instructions Limitation of Liability Disclaimer of WarrantyPreface FeaturesContents Precautions About the dehumidifying device Observe the following for installationAvoid installing in the following locations Installing placeConsumable parts Major Operating Controls and Their Functions Video output cable with BNC connec- tor Power cable 12 V DC or 24 V AC Cautions2Optional heater connector 6 pin female 3LED indicatorLens Mounting WV-CW484FK, CW484SK Installations InstallationsUsing a Junction Box Using Mounting Bracket WV-Q114 Option Fixing the camera attachment to the mounting bracket Using a Junction Box How to mount the cameraUsing Mounting Bracket WV-Q114 Option Protrusion Screw hole of camera attachment Rear screw Camera fixing screw Waterproof processing of cable connection Waterproof ProcessWinding the provided butyl tape Download Image Adjustment How to use a varifocal lens Zoom/focus adjustmentVideo Output Connection Power ConnectionWire Colors & Functions ConnectionsCable Length and Wire Gauge Optional Heater Unit WV-CW4H InstallationIntroduction For Using General Vari-focal Lenses Flange-back Back Focus AdjustmentBefore Back-focus Adjustment For Adjusting the FocusSettings items of the camera setup About Setup MenusSetup item Description Language Basic operation Page Language Setup Language Setup Setting ProceduresCamera Identification Setting Camera ID ALC Mode with SUPER-D3 on Light Control Mode Setting ALCSuper Dynamic 3 Function SUPER-D3 ALC Mode with SUPER-D3 OFF Shutter Speed Setting ShutterElectronic Sensitivity Enhancement Sens UP Gain Control Setting AGCWhite Balance Setting White BAL Synchronization Setting SyncMotion Detection Setting Motion DET Motion Detector Demo ModeAbout MODE2 of Motion Detection Digital Noise Reduction Setting DNRResolution Setting Resolution Black and White Mode Setting BW ModePrivacy Zone Setting Privacy Zone Camera Picture Upside Down Positioning UPSIDE-DOWN Electronic Zoom EL-ZOOMAuto Image Stabilizer Stabilizer Lens Back-focus Setting BACK-FOCUS SetupChroma Level Setting Chroma Gain Special Menu Special SetupPixel Compensation Setting PIX OFF Aperture Gain Setting AP GainPedestal Level Setting Pedestal Chroma Phase Hue Setting HUESerial number of the camera will be displayed To reset to the default settings Camera ResetCause/solution TroubleshootingSymptom General specifications SpecificationsCamera Optional Accessories Standard AccessoriesLens WV-CW484S, WV-CW484F Page Panasonic Canada Inc