Panasonic WV-CW484F Waterproof Process, Waterproof processing of cable connection

Page 19

■Waterproof Process

•When routing cables sideway using Mounting Bracket WV-Q114 (option) or installing the camera under eaves, apply waterproof process to the cable and relevant portions.

•The cables are not waterproofed. Provide water sealing for the tube ends and the portions between cable cores as well as connecting portions.

•The use of vinyl tape or other tapes instead of the butyl tape may cause water absorption from a gap and finally condensation and water leakage.

●Waterproof processing of cable connection

Surely use the provided butyl tape. (Do not use a sealing material on those parts.)

1.Connect and tape the power cables.

2.Bind the power cables together with the tape.

3.Tape the BNC-BNC joint.

Power cable

Video output cable

Winding the provided butyl tape

Stretch the tape to about twice its original length as shown and wind the tape around the cables. The tape will not harden if the tape is not stretched enough.

Stretch the tape to about twice.

About twice

19

Image 19

Contents Model No. WV-CW484 Series Do not Remove Cover or Back No USER-SERVICEABLE Parts Inside Important Safety Instructions Limitation of Liability Disclaimer of WarrantyPreface FeaturesContents Precautions About the dehumidifying device Observe the following for installationAvoid installing in the following locations Installing placeConsumable parts Major Operating Controls and Their Functions Video output cable with BNC connec- tor Power cable 12 V DC or 24 V AC Cautions2Optional heater connector 6 pin female 3LED indicatorLens Mounting WV-CW484FK, CW484SK Installations InstallationsUsing a Junction Box Using Mounting Bracket WV-Q114 Option Fixing the camera attachment to the mounting bracket Using a Junction Box How to mount the cameraUsing Mounting Bracket WV-Q114 Option Protrusion Screw hole of camera attachment Rear screw Camera fixing screw Waterproof processing of cable connection Waterproof ProcessWinding the provided butyl tape Download Image Adjustment How to use a varifocal lens Zoom/focus adjustmentVideo Output Connection Power ConnectionWire Colors & Functions ConnectionsCable Length and Wire Gauge Optional Heater Unit WV-CW4H InstallationIntroduction For Using General Vari-focal Lenses Flange-back Back Focus AdjustmentBefore Back-focus Adjustment For Adjusting the FocusSettings items of the camera setup About Setup MenusSetup item Description Language Basic operation Page Language Setup Language Setup Setting ProceduresCamera Identification Setting Camera ID ALC Mode with SUPER-D3 on Light Control Mode Setting ALCSuper Dynamic 3 Function SUPER-D3 ALC Mode with SUPER-D3 OFF Shutter Speed Setting ShutterElectronic Sensitivity Enhancement Sens UP Gain Control Setting AGCWhite Balance Setting White BAL Synchronization Setting SyncMotion Detection Setting Motion DET Motion Detector Demo ModeAbout MODE2 of Motion Detection Digital Noise Reduction Setting DNRResolution Setting Resolution Black and White Mode Setting BW ModePrivacy Zone Setting Privacy Zone Camera Picture Upside Down Positioning UPSIDE-DOWN Electronic Zoom EL-ZOOMAuto Image Stabilizer Stabilizer Lens Back-focus Setting BACK-FOCUS SetupChroma Level Setting Chroma Gain Special Menu Special SetupPixel Compensation Setting PIX OFF Aperture Gain Setting AP GainPedestal Level Setting Pedestal Chroma Phase Hue Setting HUESerial number of the camera will be displayed To reset to the default settings Camera ResetCause/solution TroubleshootingSymptom General specifications SpecificationsCamera Optional Accessories Standard AccessoriesLens WV-CW484S, WV-CW484F Page Panasonic Canada Inc