Panasonic Standard Accessories, Optional Accessories, Lens WV-CW484S, WV-CW484F

Page 48

Digital noise reduction:

High or Low

Resolution:

Normal or High

Black-and-white mode:

AUTO1, AUTO2, ON, or OFF

Privacy zone:

ON (1/2), or OFF

Auto image stabilizer:

ON or OFF

Back focus adjustment:

ABF, MANUAL, AUTO/PRESET/FIX

Special:

Chroma, Aperture, Pedestal, HUE adjustable

Lens (WV-CW484S, WV-CW484F)

Type:

x2 varifocal

Focal length:

3.8 mm – 8.0 mm

Maximum aperture ratio:

1:1.4 (Wide), 1:1.8 (Tele)

Focusing range:

1.2 m - (3.9 ft. - )

Angular field of view:

Horizontal: 35.6 ° (Tele) - 73.6 ° (Wide)

 

Vertical: 26.6 ° (Tele) - 53.4 ° (Wide)

Ambient operating

–10 °C - +50 °C {14°F - 122 °F}

temperature:

–30 °C - +50 °C {–22 °F - 122 °F}*

* With Heater Unit WV-CW4H (option)

Standard Accessories

Operating Instructions (This document)

1 pc.

Warranty

1 pc.

The following parts are used during installation procedures.

Camera attachment

1 pc.

Bit for tamperproof screw

1 pc.

Butyl tape

1 pc.

Optional Accessories

Clear dome cover WV-CW4C

 

Weight:

Approx. 110 g {0.24 lbs.}

Heater Unit WV-CW4H

 

Weight:

Approx. 40 g {0.08 lbs.}

Mounting Bracket WV-Q114

 

Weight:

Approx. 470 g {1.04 lbs.}

Ceiling Mount Bracket WV-Q166

Weight:

Approx. 660 g {1.45 lbs.}

48

Image 48
Contents Model No. WV-CW484 Series Do not Remove Cover or Back No USER-SERVICEABLE Parts Inside Important Safety Instructions Disclaimer of Warranty Limitation of LiabilityFeatures PrefaceContents Precautions Observe the following for installation Avoid installing in the following locationsInstalling place About the dehumidifying deviceConsumable parts Major Operating Controls and Their Functions Power cable 12 V DC or 24 V AC Cautions 2Optional heater connector 6 pin female3LED indicator Video output cable with BNC connec- torLens Mounting WV-CW484FK, CW484SK Installations InstallationsUsing a Junction Box Using Mounting Bracket WV-Q114 Option Fixing the camera attachment to the mounting bracket How to mount the camera Using a Junction BoxUsing Mounting Bracket WV-Q114 Option Protrusion Screw hole of camera attachment Rear screw Camera fixing screw Waterproof Process Waterproof processing of cable connectionWinding the provided butyl tape Download Image Adjustment Zoom/focus adjustment How to use a varifocal lensPower Connection Wire Colors & FunctionsConnections Video Output ConnectionCable Length and Wire Gauge Installation Optional Heater Unit WV-CW4HIntroduction Flange-back Back Focus Adjustment Before Back-focus AdjustmentFor Adjusting the Focus For Using General Vari-focal LensesAbout Setup Menus Settings items of the camera setupSetup item Description Language Basic operation Page Setting Procedures Language Setup Language SetupCamera Identification Setting Camera ID Light Control Mode Setting ALC ALC Mode with SUPER-D3 onSuper Dynamic 3 Function SUPER-D3 Shutter Speed Setting Shutter ALC Mode with SUPER-D3 OFFGain Control Setting AGC Electronic Sensitivity Enhancement Sens UPSynchronization Setting Sync White Balance Setting White BALMotion Detection Setting Motion DET Demo Mode Motion DetectorDigital Noise Reduction Setting DNR Resolution Setting ResolutionBlack and White Mode Setting BW Mode About MODE2 of Motion DetectionPrivacy Zone Setting Privacy Zone Electronic Zoom EL-ZOOM Camera Picture Upside Down Positioning UPSIDE-DOWNAuto Image Stabilizer Stabilizer Back-focus Setting BACK-FOCUS Setup LensSpecial Menu Special Setup Chroma Level Setting Chroma GainAperture Gain Setting AP Gain Pedestal Level Setting PedestalChroma Phase Hue Setting HUE Pixel Compensation Setting PIX OFFTo reset to the default settings Camera Reset Serial number of the camera will be displayedTroubleshooting Cause/solutionSymptom Specifications General specificationsCamera Standard Accessories Optional AccessoriesLens WV-CW484S, WV-CW484F Page Panasonic Canada Inc