Sharp XL-DAB10NH, XL-DAB20NH General control Setting the clock Remote control Only, Equaliser

General control (continued)	Setting the clock (Remote control
	only)

■Function (on main unit only)

When the FUNCTION button on main unit is pressed, the current function will change to different mode. Press the FUNCTION button repeatedly to select desired function.

CD TUNER DAB

AUX IN iPod USB

Note:

The backup function will protect the memorised function mode for a few hours should there be a power failure or the AC power lead becomes disconnected.

■Equaliser

When the EQUALIZER button is pressed, the current mode setting will be displayed. To change to a different mode, press the EQUALIZER button repeatedly until the desired sound mode appears.

FLAT Noequalizationequalisation. .

ROCK Forr rockrockmusicmusic. .

CLASSIC Forr clasclassicalical musicmusic. .

POPS Forr poppopmusicmusic. .

VOCAL Vocalscals arearenhancedenhanced. .

JAZZ Foror jazzjazz. .

In this example, the clock is set for the 24-hour (00:00) display.

1Press the ON/STAND-BY button to turn to stand-by mode.

2Press and hold the CLOCK/TIMER button until “00:00” appear.

3Within 10 seconds, press the or button to adjust the hour and then press the CLOCK/TIMER

button. Press the or button once to advance the time by 1 hour. Hold it down to advance continuously.

4Press the or button to adjust the minutes and

then press the CLOCK/TIMER button. Press the or

button once to advance the time by 1 minute. Hold it down to advance continuously.

To confirm the time display:

[When the unit is in the stand-by mode]

Press the CLOCK/TIMER button. The time display will appear for about 5 seconds.

[When the power is on]

Press the CLOCK/TIMER button. The time display will appear for about 5 seconds.

Note:

The “00:00” will appear blinking when the AC power supply is restored after a power failure or unplugging the unit. Readjust the clock as follows.

To readjust the clock:

Perform “Setting the clock” from step 1.

E-6