Panasonic AG-EZ50UP Inserting a Button-type Battery, Using the Remote Controller

1

2

3

1

ªInserting a Button-type Battery

Before using the remote controller, insert the supplied button-type battery.

1 While pressing the Stopper 1, pull out the Battery Holder.

2Insert the button-type battery with the imprint (i) facing

upward.

3 Insert the Battery Holder into the Remote Controller.

≥When the button-type battery becomes weak, replace it with a new CR2025 battery. (A battery is normally expected to last about one year. However, it depends on operation frequency.)

1≥Make sure to match the poles properly when inserting the battery.

.........................................................................................................................

Warning

Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type recommended by the

equipment manufacturer. Discard used batteries according to manufacturer’s instructions.

Risk of fire, explosion and burns. Do not recharge, disassemble, heat above 212°F (100°C) or incinerate. Keep the Button-Type battery out of the reach of children. Never put Button-Type battery in mouth. If swallowed call your doctor.

.........................................................................................................................

Replace battery with CR2025 only. Use of another battery may present a risk of fire or explosion.

Caution-Battery may explode if mistreated.

Dispose of used battery promptly. Keep away from children. Do not recharge, disassemble or dispose of in fire.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

ªUsing the Remote Controller

1 Direct the Remote Controller to the Remote Control Sensor on the Camera/Recorder and press the desired button.

≥Distance from the Camera/Recorder: Within Approximately 15 feet (5 meters)

≥Angle: Approximately 15 degrees in the vertical and horizontal directions from the central axis

≥The above operating ranges are for indoor use. Outdoors or under strong light, the equipment may not operate properly even within the above ranges.

≥Within 3 feet (1 meter) range, you can also use the Remote Controller on the side (the LCD Monitor side) of the Camera/Recorder.

Selecting Remote Controller Modes

2

DATE/

OSD TIME

COUNTER RESET

MULTI/

P-IN-P ¥REC

V/REW PLAY

6 1

STILL ADV PAUSE

E;

INDEX STOP

K∫

SELECT

VAR.

SEARCH

STORE

OFF/ON

P.B.DIGITAL

PHOTO

SHOT

TITLE

A.DUB

FF/W

5

STILL ADV

D

INDEX

L

MENU

			When 2 Camera/Recorders are used simultaneously, they can be operated
VIDEO CAMERA			individually by selecting different Remote Controller Modes.
START/			≥If the Remote Controller Mode on the Camera/Recorder and Remote
STOP
ZOOM			Controller do not match, [REMOTE] is displayed.
T
sVOLr			Setting on the Camera/Recorder:
W			Set [REMOTE] on the [OTHER FUNCTIONS] Sub-Menu to the desired
			Remote Controller Mode.
			Setting on the Remote Controller:
P.B.
ZOOM			[VCR1]: Press the [D] Button and [∫] Button simultaneously. 1
		1
	SET		[VCR2]: Press the [E] Button and [∫] Button simultaneously. 2

ITEM	≥When the battery in the Remote Controller is replaced, the Mode is
	automatically reset to [VCR1] Mode.

11