PUSH
2
WT
MENU
Digital Zoom Function
This function is useful when you want to record
1Set [CAMERA FUNCTIONS] >> [CAMERA SETUP] >> [D.ZOOM] >> [25t] or [100t].
≥25k: Digital zooming to 25t
≥100k: Digital zooming to 100t
2To zoom in or out, press the [W/T] zoom lever towards [W] or
towards [T].
≥As the magnification of digital zooming increases, the quality of image may
VOL/JOG
1
25tWT
D.ZOOM
deteriorate.
Canceling the Digital Zoom Function
Set [D.ZOOM] on the [CAMERA SETUP]
≥For other notes, see page 46.
1
EIS
1 | MENU |
PUSH |
VOL/JOG
12
12 , 2
FADE
, 3,1 ,3
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Optical Image Stabilizer Function
If you are recording in unstable situations and the Camera/Recorder is shaky, you can use this function to correct the distortion in these images.
≥If the Camera/Recorder shakes too much, this Function may not be able to stabilize images.
1Set [CAMERA FUNCTIONS] >> [CAMERA SETUP] >> [EIS] >> [ON].
≥The [EIS] Indication 1 appears.
Canceling Optical Image Stabilizer
Set [EIS] on the [CAMERA SETUP]
≥For other notes, see page 46.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fade In/Out Functions
Fade In 1
Fade In brings out images and sounds gradually from a black screen at the beginning of a scene.
1Hold down the [FADE] Button while the Camera/Recorder is set to the Recording Pause Mode.
≥The image fades out gradually.
2When the image is completely gone, press the Recording Start/Stop Button to start recording.
3Release the [FADE] Button about 3 seconds after starting recording.
≥The image reappears gradually.
Fade Out 2
Fade Out causes images and sounds to disappear gradually, leaving a black screen at the end of a scene.
1Hold down the [FADE] Button while recording.
≥The image fades out gradually.
2About 3 seconds after the image is completely gone, press the Recording Start/Stop Button to stop recording.
3Release the [FADE] Button.
≥For other notes, see page 46.
22