1
AUTO |
MANUAL |
AE LOCK |
2 
W.B.
1
2 |
| 4 |
|
|
|
35
1
AUTO |
MANUAL |
AE LOCK |
| W.B. | 2 |
| MNL |
|
| 1 |
|
|
| 2 |
|
| 1 |
10 000K |
| 2) |
9 000K |
|
|
8 000K |
| 3) |
7 000K |
| 4) |
6 000K |
| |
|
| |
5 000K |
| 5) |
|
| |
1) |
| 6) |
4 000K |
|
|
3 000K |
| 7) |
|
| |
| 8) |
|
2 000K | 9) |
|
| 10) |
|
1 000K |
|
|
Recording in Natural Colors (White Balance)
Depending on the scene or lighting conditions, the Automatic White Balance Adjustment Mode may not be able to bring out natural colors. In such a case, the white balance can be adjusted manually.
1Set the Mode Selector Switch to [MANUAL].
≥The [MNL] Indication appears.
2Press the [W.B.] Button repeatedly to set a desired White Balance Mode.
1Automatic White Balance Adjustment
2Indoor Mode (shooting under incandescent lamp)
3Outdoor Mode
4Fluorescent light Mode
5The White Balance setting that was previously set manually
To Resume Automatic Adjustment
Press the [W.B.] Button repeatedly until no Indication appears. Or, set the Mode Selector Switch to [AUTO].
≥For other notes, see page 47.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Adjusting White Balance Manually
When the Auto White Balance Adjustment function does not operate under the existing light conditions, use the Manual White Balance Adjustment mode.
1Set the Mode Selector Switch to [MANUAL].
≥The [MNL] Indication appears.
2Point the Camera/Recorder at a
Indication stops flashing.
≥The [1] Indication appears after the screen has darkened for a
moment.
≥When the [1] Indication flashes after turning the Camera/Recorder on, the previously adjusted white balance setting is still kept.
To Resume Automatic Adjustment
Press the [W.B.] Button repeatedly until no Indication appears. Or, set the Mode Selector Switch to [AUTO].
About White Balance Sensor
The White Balance Sensor 1 determines the nature of the light source during recording.
≥Do not cover the White Balance Sensor with your hand during recording. Otherwise, White Balance will not function normally.
≥The red light from the Tally Lamp 2 will be reflected off your hand or object, possibly causing the White Balance sensor to operate incorrectly and changing the coloring.
Use of Auto White Balance Adjustment in inappropriate lighting conditions may result in reddish or bluish images. Where the subject is found on the left but surrounded by many
1)The range that is controlled by the Auto White Balance Adjustment Mode of this Camera/Recorder
2)Blue sky
3)Cloudy sky (Rain)
4)TV screen
5)Sunlight
6)White fluorescent light
7)Halogen light bulb
8)Incandescent light bulb
9)Sunrise and sunset
10)Candlelight
≥For other notes, see page 47.
25