1
BACK
LIGHT
1
ª
Backlight Compensation Function
This prevents a recording subject from being recorded darker in backlight. (Backlight is the light that shines from behind a recording subject.)
1Press the [BACK LIGHT] Button.
≥The [ª] Indication 1 flashes and then is displayed.
To resume normal Recording
Press the [BACK LIGHT] Button.
≥When the [BACK LIGHT] Button is pressed, the entire screen becomes brighter.
≥By operating the [OFF/ON/MODE] Switch, the Backlight Compensation Function is cancelled.
AUTO | 1 |
MANUAL | |
AE LOCK |
|
2 | MENU | |
PUSH | ||
| ||
| VOL/JOG | |
1 | 2 | |
3 | 4 |
5
1 2
FOCUS
AUTO |
MANUAL |
AE LOCK |
3
1
MNL
MF
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Recording in Special Situations (Program AE)
Select optimal automatic exposures under specific recording situations.
1Set the Mode Selector Switch to [MANUAL].
≥The [MNL] Indication appears.
2Set [CAMERA FUNCTIONS] >> [CAMERA SETUP] >>
[PROG.AE] >> a desired Mode [5], [7], [4], [Ω], [º].
≥The Indication of the selected Mode is displayed. [5] Sports Mode 1
For Recording scenes involving quick movements, such as sports scenes.
[7] Portrait Mode 2
Focuses on the main subject of the image and leaves the background slightly out of focus.
[4] Low Light Mode 3
Preserves the mood of dim light settings without altering picture brightness.
[Ω] Spotlight Mode 4
Neutralizes the additional brightness created by a spot light.
[º] Surf & Snow Mode 5
Compensates for excessive illumination from sun glare to produce a clear picture.
Canceling the Program AE Function
Set [PROG.AE] on the [CAMERA SETUP]
≥For other notes, see page 46.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Manual Focus Adjustment
Focus can be adjusted manually for recording in a situation where auto focus may not function well.
1Set the Mode Selector Switch to [MANUAL].
≥The [MNL] Indication appears.
2Press the [FOCUS] Button.
≥The [MF] Indication (Manual Focus Mode) 1 appears.
3Rotate the Focus Ring to adjust the focus.
To Resume Automatic Adjustment
Press the [FOCUS] Button to turn off the [MF] Indication. Or, set the Mode Selector Switch to [AUTO].
23