Panasonic AG-EZ50UP Index Search Functions, ªPhotoshot Index Search, Scene Index Search

3 or the [∫]

1, 1

PUSH

MENU

Index Search Functions

To facilitate searching of desired scene, this Camera/Recorder automatically records index signals during recording, as explained in the following.

Photoshot Index Signal

These signals are automatically recorded whenever still pictures are taken in Photoshot Mode (l21) or whenever you copy pictures on a Memory card to a cassette (l36).

When recording still pictures using the Continuous Photoshot Mode (l21), the index signal is not recorded.

Scene Index Signal

Scene Index Signals are automatically recorded when you start recording after inserting a Cassette.

However, if the Camera/Recorder is switched from the VCR Mode to Camera

VOL/JOG

2, 2
4					VIDEO CAMERA
3		DATE/		PHOTO	START/
	OSD	TIME		SHOT
	COUNTER	RESET		TITLE	ZOOM
	MULTI/P-IN-P ¥REC rA. UB				T
	V6/R W	PLAY1	VOLs
				FF/5W	W
2	STILLEADV PAUSE;			STILLDADV
	INDEXKLSTOP￿INDEX
	SELECT	VAR.			P.B.
		SEARCH			ZOOM

STORE

	MENU
OFF/ON	SET
P.B.DIGITAL	ITEM

1INDEX

Mode or if the date and time are set before the start of recording, the index signal is not recorded.

≥If [INDEX] of [RECORDING SETUP] Sub-Menu on the [CAMERA

		FUNCTIONS] Main-Menu is set to [2HOUR], an index signal is recorded
1		when Recording is restarted after a lapse of 2 hours or longer. If it is set to
		[DAY], an index signal is recorded when recording is restarted after the date
		has changed since the last recording. (While the index signal is recorded,
		the [INDEX] Indication 1 flashes for a few seconds.)
	ªPhotoshot Index Search
	1 Set [VCR FUNCTIONS] >> [PLAYBACK FUNCTIONS] >>
		[INDEX] >> [PHOTO].
	2	Press the [9] Button 1 or the [:] Button 2 on the
		Remote Controller.

≥With each press of the corresponding button, still pictures recorded in Photoshot Mode are searched.

≥After Pictures with Sounds are played back for 4 seconds, the Camera/ Recorder switches to the Still Playback Mode.

ªScene Index Search

1Set [VCR FUNCTIONS] >> [PLAYBACK FUNCTIONS] >> [INDEX] >> [SCENE].

2Press the [9] Button 1 or the [:] Button 2 on the

Remote Controller.

≥When the corresponding Button is pressed once, the [S 1] Indication 2 appears, and searching of the subsequent scene marked with an index signal starts. Each time the button is pressed after the start of Scene Index Search the indication changes from [S 2] to [S 9], and the beginning of the scene corresponding to the selected number will be searched. After reaching the desired scene, playback starts automatically.

2

S 1

≥Up to 9 scene numbers can be selected.

Top Scan

If the [9] Button or the [:] Button is pressed for more than 2 seconds, the Camera/Recorder will scan for scenes (or PhotoShots) and playback the first few seconds of each. (To cancel, press the [1] Button

Button 4.)

≥For other notes, see page 47.

30