Setting the time data
Setting the user’s bit
By setting the user’s bit, memos (dates, times) and other information consisting of up to 8 digits in hexadecimal notation can be recorded on the
1 Set the camera recorder’s POWER switch to ON.
2 Select USER as the setting for the UB MODE item on the setting menu RECORDING SETUP screen.
OFor details on the menu operations, refer to page 38.
RECORDING SETUP
: |
|
|
| ||
TCG | H FREE RUN | ||||
FIRST REC TC | H PRESET | ||||
TC PRESET | H | ||||
| UB MODE |
| H USER TIME | ||
|
| DATE | TCG FRM.RATE | ||
UB PRESET | H | ||||
; |
|
|
| ||
|
| PUSH MENU TO RETURN |
|
3 Tilt the OPERATION lever in the 4 direction
and move to the UB PRESET item. | ||||
|
| RECORDING SETUP | ||
: |
|
| ||
TCG | H FREE RUN | |||
FIRST REC TC | H PRESET | |||
TC PRESET | H | |||
UB MODE | H USER | |||
|
| H | ||
| UB PRESET |
| ||
| ; |
|
| |
|
| PUSH MENU TO RETURN |
4 Press “;” of the OPERATION lever, and move “1” to YES.
RECORDING SETUP
: |
|
| |
TCG | H FREE RUN | ||
FIRST REC TC | H PRESET | ||
TC PRESET | H | ||
UB MODE | H USER | ||
|
| ||
| UB PRESET |
| |
| ; |
|
|
PUSH MENU TO RETURN
5 The screen shown below appears. Set the user’s bit using the OPERATION lever.
Tilt the OPERATION lever in the 3 or 4 direction, select the user’s bit characters, press “;” of the OPERATION lever, and move to the next digit.
OThe numbers 0 to 9 and letters A to F can be used as the user’s bit characters.
OWhen the COUNTER RESET button is pressed on the screen shown below, the user’s bit is reset to zero.
UB PRESET
00 0 0 0 0 0 0
+ :PUSH PLAY
–:PUSH STOP SEL:PUSH STILL
PUSH MENU TO RETURN
6 Upon completion of the user’s bit setting, press the MENU button. The screen shown below appears. Tilt the OPERATION lever in the 4 direction, select YES, and press “;” of the OPERATION lever.
UB PRESET
PRESET OK?
NO
YES
7 Press the MENU button twice to release the menu mode.
ENGLISH
33 (E)