Panasonic AG-DVX100A manual Recording Setup screen, Inputs and audio tracks recorded

Setting menus

PLAYBACK FUNCTIONS screen

Item/	Description of settings
(display mode)
AUDIO OUT	For setting the audio signals to be output
(VCR)	from the AUDIO IN/OUT connectors (pin
	jacks) when a tape is played back.
	CH1•CH2:
	CH1 connector = CH1 signals
	CH2 connector = CH2 signals
	CH1:
	CH1 connector = CH1 signals
	CH2 connector = CH1 signals
	CH2:
	CH1 connector = CH2 signals
	CH2 connector = CH2 signals

Inputs and audio tracks recorded

Input	When shooting	When audio dubbing
		(12-bit mode)
Internal	CH1	CH3
microphone L
Internal	CH2	CH4
microphone R
INPUT 1 (XLR)	CH1	CH3
INPUT 2 (XLR)	CH2 (CH1)	CH4 (CH3)
AUDIO IN/OUT	__	CH3
CH1 (pin jack)
AUDIO IN/OUT	__	CH4
CH2 (pin jack)

RECORDING SETUP screen

Item/			Description of settings
(display mode)
REC SPEED	For selecting the recording time mode.
(Camera)	SP : SP (standard play) mode
(VCR)	LP : LP (long play) mode
AUDIO REC	For selecting the system for converting the
(Camera)	recording to PCM audio.
(VCR)	32K (12 bit)		:	12-bit/32kHz
	48K (16 bit)		:	16-bit/48kHz
MIC ALC	For setting the mic level automatic control
(Camera)	function to ON or OFF.
	OFF	ON
	Audio distortion caused by excessively high
	input level can be minimized by selecting
	ON for this item.
	O The recording level of the audio signals
	must be adjusted using the AUDIO
	controls, irrespective of this setting.
MIC GAIN 1	For setting the input level of the external
(Camera)	microphone which is connected to the
	INPUT 1 connector.
	-50 dB	-60 dB
MIC GAIN 2	For setting the input level of the external
(Camera)	microphone which is connected to the
	INPUT 2 connector.
	-50 dB	-60 dB

The audio tracks on which signals are to be recorded during shooting can be changed using the CH1 SELECT switch and CH2 SELECT switch.

The audio tracks on which signals are to be recorded during audio dubbing can be changed using the A DUB INPUT item on the AV IN/OUT SETUP screen.

32K (12-bit) AUDIO item and AUDIO OUT item settings, and audio tracks whose signals are output from the AUDIO IN/OUT connectors (pin jacks)

Audio recording	32K (12-bit) AUDIO	AUDIO OUT	AUDIO IN/OUT	AUDIO IN/OUT
mode	item setting	item setting	CH1 output	CH2 output
		CH1•CH2	CH1	CH2
	ST1	CH1	CH1	CH1
		CH2	CH2	CH2
32K (12 bit)
		CH1•CH2	CH3	CH4
	ST2	CH1	CH3	CH3
		CH2	CH4	CH4
	MIX	__	CH1+CH3	CH2+CH4
		CH1•CH2	CH1	CH2
48K (16 bit)	__	CH1	CH1	CH1
		CH2	CH2	CH2

The underlining indicates the factory setting.

44 (E)