Panasonic AG-DVX100A manual Beep Sound, Clock SET, VCR Time Shift, User File, Hour Meter

Setting menus

OTHER FUNCTIONS screen

Item/		Description of settings		ENGLISH
(display mode)
BEEP SOUND	For setting the beep tone to ON or OFF.
(Camera)	OFF	ON
	When ON is selected as the setting, the
	beep tone is sounded at the times given
	below.
	O When the beep tone is sounded, the
	audio signals from the output connectors
	are muted, and the beep tone is output
	instead.
	[Beep tone sounds once]
	OWhen the POWER switch has been set
	to ON
	OWhen shooting has commenced
	[Beep tone sounds twice]
	OWhen shooting has been temporarily
	stopped
	[Beep tone sounds 10 times]
	OWhen the cassette tape has not been
	inserted
	OWhen the cassette tape is in the
	recording pause mode
	OWhen condensation has formed inside
	the camera recorder
	OWhen a problem has occurred in the
	camera recorder
CLOCK SET	For setting the internal calendar of the
(Camera)	camera recorder.
(VCR)
TIME SHIFT	For adding the time which was set using
(Camera)	this item to the time of the internal calendar
(VCR)	(to compensate for time differences) for
	display in the viewfinder and on the LCD
	monitor. The clock time after		the
	compensation is also recorded on the tape.
	+23h ---+1h, OFF, –1h ---–23h
	(In 1-hour increments)
TAPE PROTECT	When the camera recorder is left on
(Camera)	standby for about 5 minutes in the shooting
	pause mode, it is automatically set to the
	tape	protection mode. Which	tape
	protection mode is to be established is
	selected using this item.
	POWEROFF: The camera recorder’s power is
	set to the OFF mode.
	STBY: The cylinder head is set to the stop
	mode.
USER FILE	LOAD: The settings stored last in the user
(Camera)	file are loaded.
(VCR)	SAVE: The user file settings which have
	been changed are saved.
	INITIAL: The user file settings are restored
	to the factory settings.
	O When the LOAD or INITIAL operation
	has been performed, set the POWER
	switch on the camera recorder to OFF
	and then to ON again in order to enable
	the settings.
HOUR METER	For indicating the total rotational time of the
(Camera)	cylinder head (5-digit display in 1-hour
(VCR)	increments).
				The underlining indicates the factory setting.

49 (E)