Panasonic AG-DVX100A manual Remote

Screen displays

	=						;
				A	I – P A U S E		U S E R - 1
		DV O		T C 1 2 : 3 4 : 5 6 : 0 0				Z 7 8	>
		S P
<		2 5 P					M F 2 5		@
		S Q U 2 2 2 2 2 2 2 2 2 2 2 2 2 2 M A C R O							A
				2 2 2 2 2 2 2 2 2 2			P 3.2 K		?
			2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 F 5 . 6						B
								1 8 dB
		S P O T		L OW L I G H T				ND 1/ 64
8		1/ 1 2 3 . 4			ND 1/ 64		I N D E X
		ALC		A U G	3 1 2 0 0 3 2 3 : 5 9 : 5 9
			CH1			2 2m i n
		4 8 K CH2

ENGLISH

: 9

8Shutter speed display

The shutter speed is normally displayed here. “SLOW” is displayed in the slow shutter mode.

When the ZEBRA button is pressed and the marker is displayed (see page 17), the video level of the image near the center of the screen is displayed as a value from 0% to

90%.

When the level exceeds 90%, “90%:” is displayed.

9Audio level meter display

–34 dB –12 dB 0 dB

CH1

CH2

:Audio sampling frequency display

;Scene filename display

<Progressive display

The information on the frame rate when shooting in the progressive mode is displayed here.

=Warning information displays

REMOTE:

This flashes when the component for which the wireless remote control unit is set is the wrong one.

:

This lights when condensation has formed inside the camera recorder.

:

This flashes when the cylinder head is dirty.

:

This flashes when the cassette tape has not been inserted or when it has been set to the recording inhibit mode.

:

This lights if a problem occurs in the camera recorder when face-to-face shooting is performed in the mirror mode.

:

This lights when the internal battery used for the calendar has run down.

>Zoom position display

The zoom position from Z00 (max. wide angle) to Z99 (max. telephoto) appears here.

?AWB information display

The white balance information appears here.

@Focus control information display

The focus control information from 99 to 00 appears here.

95 (focal length: infinity)

:

50 (focal length: approx. 1 meter) Under 49 (macro range)

:

00 (focal length: approx. 2 cm)

ODepending on the zoom position, the focus may not be within the macro range. Similarly, depending on the zoom position, the lower limit of the macro range may differ.

AMacro control display

BIris display

The F-number appears here.

51 (E)