Setting menus
SW MODE screen
Item/ | Description of settings | |
(display mode) | ||
| ||
|
| |
|
| |
MID GAIN | For setting the gain value which is to be | |
(Camera) | allocated to the M position of the GAIN | |
| switch. | |
| 0 dB, 3 dB, 6 dB, 9 dB, 12 dB | |
|
| |
HIGH GAIN | For setting the gain value which is to be | |
(Camera) | allocated to the H position of the GAIN | |
| switch. | |
| 0 dB, 3 dB, 6 dB, 9 dB, 12 dB | |
|
| |
ATW | For setting the ATW (Auto Tracking White) | |
(Camera) | function which is to be allocated to the | |
| WHITE BAL switch. | |
| OFF: | |
| The ATW function is not activated. | |
| However, if it has been set in the AUTO | |
| button or USER button, it will follow the | |
| operation of the button concerned. | |
| Ach: | |
| The ATW function is activated when the | |
| WHITE BAL switch has been set to the A | |
| position. | |
| Bch: | |
| The ATW function is activated when the | |
| WHITE BAL switch has been set to the B | |
| position. | |
| PRE: | |
| The ATW function is activated when the | |
| WHITE BAL switch has been set to the | |
| PRST position. | |
|
| |
HANDLE ZOOM | For setting the zoom speeds which are to | |
(Camera) | be allocated to the positions of the | |
| HANDLE ZOOM switch. | |
| L/OFF/H: | |
| LOW/OFF/HIGH are set to the 1/2/3 | |
| positions. (At OFF, no zoom operations | |
| are performed.) | |
| L/M/H: | |
| LOW/MID/HIGH are set to the 1/2/3 | |
| positions. | |
|
| |
IRIS DIAL | For setting the rotational direction of the | |
(Camera) | IRIS dial and iris control (in the MANUAL | |
| IRIS mode). | |
| DOWN OPEN: | |
| The iris opens when the IRIS dial is | |
| turned downward. | |
| UP OPEN: | |
| The iris opens when the IRIS dial is | |
| turned upward. | |
|
|
The underlining indicates the factory setting.
Item/ | Description of settings | |
(display mode) | ||
| ||
|
| |
|
| |
USER1 | For setting the operation of the function | |
(Camera) | allocated to the USER1 button. | |
| COLOUR BAR: | |
| The colour bar display is set to ON or OFF. | |
| SPOTLIGHT: | |
| The auto iris control for the spotlight is | |
| set to ON or OFF. | |
| BACKLIGHT: | |
| The auto iris control for backlight | |
| compensation is set to ON or OFF. | |
| BLACKFADE: | |
| When the button is held down, the whole | |
| image is faded out into black. The sound | |
| is also faded out at the same time. | |
| WHITEFADE: | |
| When the button is held down, the whole | |
| image is faded out into white. The sound | |
| is also faded out at the same time. | |
| MODECHECK: | |
| When the button is pressed, the camera | |
| status currently set is displayed in the | |
| viewfinder and on the LCD monitor | |
| where it can be checked. | |
| ATW: | |
| The operation of the ATW function is set | |
| to ON or OFF. | |
| ATWLOCK: | |
| When the button is pressed, the white | |
| balance value is fixed; when it is pressed | |
| again, the operation of the ATW function | |
| is performed. | |
| GAIN:18 dB: | |
| When this button is pressed, the gain is | |
| set to 18 dB. | |
| O The picture may be temporarily | |
| disturbed when the gain has been | |
| switched to 18 dB or from 18 dB to | |
| another value. | |
| INDEX: | |
| When the button is pressed during | |
| shooting or recording, an index signal is | |
| recorded on the tape. If it is pressed while | |
| shooting or recording is temporarily | |
| stopped, the index signal recording | |
| standby mode is established. When | |
| shooting or recording is commenced from | |
| this mode, the index signal will be recorded | |
| on the tape. Recording index signals | |
| enables index searches to be performed | |
| during playback. (See page 62) | |
| SLOWSHUT: | |
| When the button is pressed, the slow | |
| shutter mode is established. Each time | |
| it is pressed, the mode is turned ON or | |
| OFF alternatively. | |
|
| |
USER2 | For setting the operation of the function to | |
(Camera) | be allocated to the USER2 button. | |
| The settings are the same as for the ones | |
| for the USER1 items. | |
| BACKLIGHT | |
|
| |
USER3 | For setting the operation of the function to | |
(Camera) | be allocated to the USER3 button. | |
| The settings are the same as for the ones | |
| for the USER1 items. | |
| INDEX | |
|
|
42 (E)