Panasonic AG-DVX100A manual Other Functions screen

Setting menus

DISPLAY SETUP screen

Item/	Description of settings
(display mode)
SELF SHOOT	For selecting the LCD monitor’s mirror
(Camera)	function for face-to-face shooting.		When
	MIRROR is set, the image on the LCD
	monitor is reversed at the left and right for
	display during face-to-face shooting.
	NORMAL	MIRROR
EVF MODE	For selecting what is to be displayed in the
(Camera)	viewfinder and on the LCD monitor.
(VCR)	ON:
	Images are shown at all times in the
	viewfinder.
	AUTO:
	When the LCD monitor is opened, the
	images	no longer appear	in the
	viewfinder.
EVF COLOUR	For selecting colour or monochrome for the
(Camera)	viewfinder display.
	ON:
	Colour display
	OFF
	Monochrome display

The underlining indicates the factory setting.

OTHER FUNCTIONS screen

Item/	Description of settings
(display mode)
REMOTE	For setting the operations which are
(Camera)	performed using the accessory wireless
(VCR)	remote control unit. (See page 19 for the
	remote control unit settings.)
	VCR1: The operation performed by the
	remote control unit which has been set
	to be used for VCR1 are accepted.
	VCR2: The operation performed by the
	remote control unit which has been set
	to be used for VCR2 are accepted.
	OFF: Operations performed by the remote
	control unit are not accepted.
DV CONTROL	For setting the control method when
(Camera)	backup shooting is to be performed by
	connecting a component for backup
	purposes to the DV connector.
	OFF: The component for backup purposes
	is not controlled.
	EXT: The component for backup purposes
	is controlled using the START/STOP
	button on the camera recorder. The
	images shot by the camera recorder are
	recorded by the component for backup
	purposes.
	However, the camera recorder does not
	record the images.
	BOTH: The images shot by the camera
	recorder are recorded by both camera
	recorder and the component for backup
	purposes.
	CHAIN: When the tape in the camera
	recorder approaches the end during
	shooting, recording is automatically
	commenced by the component for
	backup purposes, which has been set to
	the recording standby mode.
DV CMD SEL	For setting the recording operation to be
(Camera)	performed by the component for backup
	purposes when the START/STOP button
	on the camera recorder has been pressed.
	REC_P:
	The mode is switched between recording
	and recording pause.
	STOP:
	The mode is switched between recording
	and stop.
	<Note>
	Select STOP as the item’s setting if the
	component for backup purposes is not
	equipped with a recording pause function.
REC LAMP	For setting the lighting of the tally lamps.
(Camera)	OFF: The tally lamps do not light.
	FRONT: The front tally lamp (by the
	microphone) lights.
	REAR: The rear tally lamp (by the
	viewfinder) lights.
	BOTH: Both the front and rear tally lamps
	light.

48 (E)