Functional Description
Others
Camera Setting |
| Ohter |
|
Focus |
| Sync | INTERNAL |
White Balance | ATW(O) | Image Adj |
|
Exposure |
| Freeze | OFF |
Back Light | OFF |
|
|
AGC | MIDDLE |
|
|
SSNR | MIDDLE |
|
|
Day & Night | COLOR |
|
|
Others |
|
|
|
Sync: Internal Sync or Line Lock can be selected. Internal Sync is selected by default. Line Sync function can adjust the output phase of more than 1 unit without using sync signal generator. When the AC Line Lock is selected, the phases can be adjusted from 0 to 360 levels. Accordingly, the phase can be adjusted up to 360˚.
Internal | : Internal synchronization |
Line Lock | : Power line synchronization |
Line Lock Phase : The phase of line sync can be selected from 0˚ to 360˚. Initial
| value is 225˚. |
Image Adj. | : Brightness, sharpness and colour density of the image signal can |
| be adjusted. |
Tone | : The overall brightness of the screen can be adjusted. |
Sharpness | : The overall sharpness of the image can be adjusted. |
Colour | : The overall colour density of the image can be adjusted. |
Freeze: Moving image can be stopped and replayed.
ON: Image can be frozen.
OFF: Frozen image is released and the film is replayed.
2) Sequence Setting
• Sequence Setting Menu
Sepuence Setting | Preset |
Preset | Setting |
Swing SEQ | Edit |
Group SEQ | Execute |
Tour SEQ | Clear |
PTZ Trace | Status |
Auto Run |
|
Power On Resume OFF |
|
Preset : 12 items such as Pan/Tilt location, Zoom and Focus are selected among camera functions and they can be called for monitoring. Total 128 points can be preset.
Setting : Select the Preset number for setup. Adjust Pan/Tilt/Zoom and press the Enter key to save the setting. If you want to change the 12 items such as Focus, Brightness, Iris and Scene Adj., use the Up/Down key to go to and select the item. If you don’t want to change the 12 items, press the ESC
| key to go to the next Preset step. |
Edit | : You can edit the 12 preset items such as Pan/Tilt location, Zoom and |
| Focus, which are selected among camera functions. |
Execute: Select the Preset number for execution. | |
Clear | : Select the Preset number to delete for clearing. |
Status | : The current Preset number setup is displayed. |
•Motion Detection Setting
Select Motion Detection in the Preset Setting menu and then turn on the mode.
Sensitivity: This function is used to adjust the sensitivity of Motion Detection. High sensitivity may cause malfunction of the camera.
ENGLISH
SPEED DOME CAMERA 42 User’s Manual | SPEED DOME CAMERA 43 User’s Manual |