Integra DTR-4.6 Using the Multichannel DVD Input, Multichannel DVD Input Settings, Setup closes

Models: DTR-4.6

1 80
Download 80 pages 23.9 Kb
Page 49
Image 49
Using the Multichannel DVD Input

DTR-4.6.book Page 49 Thursday, September 22, 2005 1:45 PM

Using the Multichannel DVD Input

Multi CH

Receiver Multichannel DVD Input SettingsThe MULTICH menu appears.The settings are explained below.Subwoofer SensitivityManual backgroundManual backgroundManual background

Enter

Setup

Using the Multichannel DVD Input

The multichannel DVD input is for connecting a compo- nent with a 5.1-channel analog audio output, such as a DVD player, DVD-Audio/SACD-capable player, or an MPEG decoder. See page 26 for hookup information.

Press the [Receiver] Remote Mode button, followed by the [Multi CH] button.

The MULTI CH indicator appears on the display.

Audio from the multichannel DVD input will now be used for the DVD input source.

MULTI CH indicator

Note:

While the multichannel DVD input is selected, the Speaker Configuration settings on page 36 are ignored, and signals from the multichannel DVD input are fed to the subwoofer, front left, front right, center, surround left, surround right speakers as they are.

Multichannel DVD Input Settings

1

While the DVD input is selected,

 

 

press the [Receiver] Remote

 

 

Mode button, followed by the

 

 

[Setup] button.

 

 

 

The main menu appears onscreen.

 

2

Use the Up and Down [

]/[

]

 

buttons to select “4. Input Setup,”

 

and then press [Enter].

 

 

 

Use the Up and Down [

]/[

]

 

buttons to select “MULTICH,” and

 

then press [Enter].

 

 

 

The MULTICH menu appears.

 

 

4-2.MULTICH

 

 

 

----------DVD-----------

 

 

b.Subwoofer Sensitivity

 

 

: 0dB

 

 

3

Use the Up and Down [

]/[

]

 

buttons to select the settings,

 

and use the Left and Right

 

 

[ ]/[ ] buttons to change them.

 

The settings are explained below.

 

4

Press the [Setup] button.

 

 

 

 

Setup closes.

 

 

Subwoofer Sensitivity

Some DVD players output the LFE channel from their subwoofer output at 15 dB higher than normal. You can change the subwoofer sensitivity to match your DVD player. Note that this setting only affects signals con- nected to the SUBWOOFER input jack of the multichan- nel DVD input.

You can select 0 dB, +5 dB, +10 dB, or +15 dB. If you find that your subwoofer is too loud, try the +10 dB or +15 dB setting.

49

Page 49
Image 49
Integra DTR-4.6 Using the Multichannel DVD Input, Multichannel DVD Input Settings, Subwoofer Sensitivity, Setup closes