Integra DTR-4.6 Adjusting the Listening Modes, Audio Adjust Menu, Using the Cine Filter Function

DTR-4.6.book Page 57 Thursday, September 22, 2005 1:45 PM

Adjusting the Listening Modes

Audio Adjust Menu

The Audio Adjust menu has various settings for adjust- ing the sound and listening modes.

1	Press the [Receiver] Remote
	Mode button, followed by the
	[Setup] button.
	The main menu appears onscreen.
Receiver
2	Use the Up and Down [ ]/[ ]
	buttons to select “6. Audio
Enter	Adjust,” and then press [Enter].
	The Audio Adjust menu appears.
Setup	6.Audio Adjust
	------------------------
	1.Tone Control
	2.PL /Neo:6
	3.Dolby Digital
	4.LFE Level
	5.Mono/Multiplex

Cine Fltr

L Night

Using the Cine Filter Function

With the Cine Filter function, you can correct a soundtrack whose high-frequency content is too harsh, making it more suitable for home theater viewing. This function can be used with the following listening modes: Dolby Digital, Dolby Pro Logic II Movie, DTS, DTS Neo:6 Cinema, DTS 96/24, and Multichannel.

1	Press the [Receiver] Remote
	Mode button, followed by the
	[Cine Fltr] button.
	Press the [Cine Fltr] button again to
	turn off the Cine Filter function.

3

4

Use the Up and Down []/[ ] buttons to select a setting, and then press [Enter].

The menu for the selected setting appears.

Use the Up and Down []/[ ] buttons to select an option, and use the Left and Right []/[ ] buttons to change it.

The Audio Adjust settings are explained on the next page.

5	When you’ve finished, press the
	[Setup] button.
	Setup closes.

57