Integra DTR-4.6 Digital Audio Input Setup, First Time Setup—Continued, 1 22, 1, Setup closes

DTR-4.6.book Page 40 Thursday, September 22, 2005 1:45 PM

First Time Setup—Continued

Digital Audio Input Setup

1

22, 3

1, 4

If you connect a component to a digital input, you must assign that input to an input selector. For example, if you connect your CD player to OPTICAL IN 2, you must assign OPTICAL IN 2 to the CD input selector.

Here are the default assignments.

Input selector	Default assignment
DVD	Coax 1
VIDEO 1	Opt 1
VIDEO 2	No
VIDEO 3	Opt 2
TAPE	No
CD	Opt 3

2	Use the Up and Down [ ]/[ ]
	buttons to select “2. Digital
	Input,” and then press [Enter].
	The Digital Input menu appears.
	2.Digital Input
	------------------------
	a.DVD	:Coax1
	b.VIDEO1	:Opt1
	c.VIDEO2	:No
	d.VIDEO3	:Opt2
	e.TAPE	:No
	f.CD	:Opt3

3 Use the Up and Down [ ]/[ ] buttons to select an input selec- tor, and then use the Left and Right []/[ ] buttons to select: Coax 1, Coax 2, Opt 1, Opt 2, Opt 3, or No (analog).

For input selectors that you want to use with an analog input, select No.

• Inputs cannot be assigned to the Tuner input selector.

4	Press the [Setup] button.
	Setup closes.

Note:

•This procedure can also be performed on the AV receiver by using its [Setup] button, arrow buttons, and [Enter] button.

1	Press the [Receiver] button, fol-
	lowed by the [Setup] button.
	The main menu appears onscreen.

40