Integra DTR-4.6 instruction manual Using the Listening Modes, Selecting the Listening Modes

DTR-4.6.book Page 52 Thursday, September 22, 2005 1:45 PM

Using the Listening Modes

Selecting the Listening Modes

For a description of each listening mode, see “About the Listening Modes” on page 54.

•The Dolby Digital and DTS listening modes can only be selected if your DVD player is connected to the AV receiver with a digital audio connection (coaxial or optical).

•Listening mode availability depends on the format of the current input signal.

•While a pair of headphones is connected, you can only select the Mono, Direct, or Ste- reo listening mode.

Selecting on the AV Receiver

Stereo

Listening Mode

■[Stereo] button

This button selects the Stereo listening mode.

■Listening Mode []/[ ] buttons

Pressing these buttons repeatedly cycles through all of the listening modes that can be used with the cur- rent input source.

Selecting with the Remote Controller

Stereo	,
Surround	All ST
Direct

■[Stereo] button

This button selects the Stereo listening mode.

■[Surround] button

This button selects the Dolby Digital and DTS listen- ing modes.

■Listening Mode []/[ ] buttons

Pressing these buttons repeatedly cycles through all of the listening modes that can be used with the cur- rent input source.

■[Direct] button

This button selects the Direct listening mode.

■[All ST] button

This button selects the All Channel Stereo listening mode.

52