Axis Communications Q1932E user manual Recordings, Recording List, Continuous Recording

Page 34

AXIS Q1932–E PT Mount Thermal Network Camera

Recordings

Recordings

The Axis product can be configured to record video continuously or according to an action rule:

•To start a continuous recording, see page 34.

•To set up action rules, see page 31.

•To access recordings, see Recording List on page 34.

•To configure camera controlled storage, see Storage on page 44.

Recording List

Recorded videos are listed on the Recordings > List page. The list shows each recording’s start date and time, duration and the event that triggered the recording.

To play or download a recording, follow these steps:

1.Go to Recordings > List.

2.Use the filter to narrow the list of recordings. Enter the desired filter criteria and click Filter. Some filters may take a long time to complete.

3.Select the recording.

4.Click Play to play the recording, or click Download to download the recording.

Multiple recordings can be downloaded at the same time. Select the recordings and click Download. The downloaded file is a zip file containing a minimum of three files, of which the Matroska (mkv) files are the actual recordings. The recordings are time-stamped with the date and time they were downloaded (that is, not the date the recordings were made).

Note

To play recordings in Windows Media Player, AXIS Matroska File Splitter must be installed. AXIS Matroska File Splitter can be downloaded from www.axis.com/techsup/software

For detailed recording and video information, select a recording and click Properties.

To remove a recording, select the recording and click Remove.

Continuous Recording

The Axis product can be configured to continuously save video to a storage device. For information about storage devices, see Storage on page 44. To prevent the disk from becoming full, it is recommended to configure the disk to automatically remove old recordings.

If a new stream profile is selected while a recording is ongoing, the recording will be stopped and saved in the recording list and a new recording with the new stream profile will start. All previous continuous recordings will remain in the recording list until they are removed manually or through automatic removal of old recordings.

To start a continuous recording, follow these steps:

1.Go to Recordings > Continuous.

2.Select Enabled.

3.Select the type of storage device from the Storage list.

4.Select a Stream profile to use for continuous recordings.

5.Click Save to save and start the recording.

34

Page 33 Page 35
Image 34
Page 33 Page 35
Contents Axis Q1932-E PT Mount Thermal Network Camera Liability About this documentLegal Considerations Intellectual Property RightsSupport Learn MoreTable of Contents Axis Q1932-E PT Mount Thermal Network CameraConnectors Performance Considerations Network Connector Connectors and ButtonsHardware Overview RS485/RS422 Connector LED IndicatorsPower Connector SD Card SlotAccess from the Internet Access the ProductAccess from a Browser Set the Root PasswordControls on the Live View Go to Setup EventsLive View Click Use HttpsAxis Media Control viewer toolbar PTZ ControlsMedia Streams How to Stream H.264Axis Media Control AMC Alternative Methods of Accessing the Video Stream Axis Q1932-E PT Mount Thermal Network Camera Set Up the Product Basic SetupPixel Counter VideoVideo Stream ImageStream Profiles 264Overlay Camera SettingsExposure Settings Image AppearanceUse Overlay Text in an Action Rule Overlay ImageGo to Video Overlay Image Privacy Mask Under Overlay Settings, select Include textGo to Events Action Rules Viewer Settings Configure the Live ViewDefault Viewer for Browsers Browser Viewer DescriptionUser Defined Links PTZ Pan Tilt Zoom Preset PositionsGuard Tour Advanced Install PTZ DriverDevice Settings Control QueueAxis Q1932-E PT Mount Thermal Network Camera Shock Detection Set Up Motion Detection WindowsDetectors Motion DetectionParameter Object Size History Sensitivity High level 100% Default valuesLow level 0% Applications Install ApplicationGo to Setup Applications Application LicensesConfigure Axis Cross Line Detection Install Axis ApplicationAxis Cross Line Detection Configure Axis Video Motion Detection Axis Video Motion DetectionAxis Q1932-E PT Mount Thermal Network Camera Add Recipients Setting Up an Action RuleEvents Go to Events Action Rules and click AddCreate Schedules Set Up RecurrencesSet Up Email Recipients Go to Events Schedules and click AddAxis Q1932-E PT Mount Thermal Network Camera Continuous Recording RecordingsRecording List Go to Recordings ListLanguages Users System OptionsSecurity IP Address FilterCertificates IeeeGo to System Options Security Ieee Date & Time Basic TCP/IP SettingsGo to Setup System Options Security Certificates NetworkAssign IP Address Using ARP/Ping IPv4 Address ConfigurationIPv6 Address Configuration ARP/PingDNS Configuration Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service Axis Video Hosting System AvhsLink-Local IPv4 Address NTP ConfigurationHost Name Configuration NAT traversal port mapping for IPv4QoS Quality of Service Smtp emailRTP/H.264 UPnPTM can be disabled under System Options Network UPnPTMUPnPTM BonjourMount and Unmount SD Card StorageSD Card Format SD CardNetwork Share MaintenancePorts & Devices COM PortSystem Overview SupportSupport Overview Logs & ReportsScripting Reset to Factory Default SettingsPlain Config File UploadAxis Q1932-E PT Mount Thermal Network Camera Emergency Recovery Procedure TroubleshootingUpgrade the Firmware Check the FirmwareProduct cannot be accessed from a browser Symptoms, Possible Causes and Remedial ActionsProblems setting the IP address Product is accessible locally but not externallyVideo Camera Settings Problems with streaming H.264Video and image problems, general Storage and disk management problemsVideo cannot be recorded Technical Specifications Maintenance General Casing Function/group Specifications Network SecurityInstallation PowerConnectors Performance Considerations RS485/422 ConnectorFunction Pin M3.3

Q1932E specifications

Axis Communications, a leading provider of network video solutions, offers a range of advanced surveillance cameras designed to meet the needs of various security applications. Among their innovative products is the Axis Q1932E, a robust thermal network camera that excels in challenging environments where visibility is compromised.

The Q1932E is particularly valued for its ability to detect and monitor objects and people in complete darkness, smoke, fog, or adverse weather conditions. This capability stems from its thermal imaging technology, which detects heat emitted by objects rather than relying on visible light. As a result, users can achieve reliable surveillance across different lighting conditions, making it ideal for critical applications like perimeter security, transportation, and infrastructure monitoring.

One of the main features of the Axis Q1932E is its resolution. The camera offers a thermal resolution of 384x288 pixels, allowing for detailed thermal imaging. This resolution is crucial for identifying potential threats even from a distance. The built-in digital Pan-Tilt-Zoom (dPTZ) capability allows users to zoom in on specific areas of interest, enhancing monitoring efficiency without losing sight of the broader scene.

Durability is another key characteristic of the Q1932E. It is designed with a weatherproof casing, complying with the IP66 standard, ensuring it can withstand harsh weather conditions such as rain, wind, and fluctuating temperatures. This rugged design makes it suitable for outdoor installations in various environments.

The camera also features Axis' advanced video analytics capabilities, enabling motion detection and edge analytics. These functionalities allow users to receive real-time alerts and notifications when unusual activity is detected, enhancing response times to potential security threats. The integration of Axis’ Zipstream technology further optimizes bandwidth and storage usage, reducing costs while maintaining high-quality video streams.

Installation is made convenient with Power over Ethernet (PoE) support, which allows both data and power to be delivered through a single cable, simplifying the setup process. Additionally, the camera supports various mounting options, providing flexibility to adapt to different surveillance needs.

In summary, the Axis Q1932E thermal network camera is a powerful tool for security professionals seeking to enhance their surveillance capabilities. With its superior thermal imaging, durability, advanced analytics, and ease of installation, it is an excellent choice for ensuring safety and security in any environment, regardless of the lighting conditions.
Top Page Image Contents