Axis Communications Q1932E user manual System Options, Security, Users, IP Address Filter

Page 36

AXIS Q1932–E PT Mount Thermal Network Camera

System Options

System Options

Security

Users

User access control is enabled by default and can be configured under System Options > Security > Users. An administrator can set up other users by giving them user names and passwords. It is also possible to allow anonymous viewer login, which means that anybody may access the Live View page.

The user list displays authorized users and user groups (access levels):

Viewer - Access to the Live View page

Operator - Access to the Live View page and to all settings except System Options

Administrator - Unrestricted access to all settings; can add, modify and remove other users.

Under HTTP/RTSP Password Settings, select the type of password to allow. You may need to allow unencrypted passwords if there are viewing clients that do not support encryption, or if you upgraded the firmware and existing clients support encryption but need

to log in again and be configured to use this functionality.

Under User Settings, select the Enable anonymous viewer login option to allow anonymous users access to the Live View page.

Select the Enable anonymous PTZ control login to allow anonymous users access to the PTZ controls.

Deselect the Enable Basic Setup option to hide the Basic Setup menu. Basic Setup provides quick access to settings that should be made before using the Axis product.

ONVIF

ONVIF (Open Network Video Interface Forum) is a global interface standard that makes it easier for end users, integrators, consultants, and manufacturers to take advantage of the possibilities offered by network video technology. ONVIF enables interoperablity between different vendor products, increased flexibility , reduced cost and future-proof systems.

By creating a user you automatically enable ONVIF communication. Use the user name and password with all ONVIF communication with the product. For more information see www.onvif.org

IP Address Filter

IP address filtering is enabled on the System Options > Security > IP Address Filter page. Once enabled, the listed IP address are allowed or denied access to the Axis product. Select Allow or Deny from the list and click Apply to enable IP address filtering.

The administrator can add up to 256 IP address entries to the list (a single entry can contain multiple IP addresses).

HTTPS

HTTPS (HyperText Transfer Protocol over Secure Socket Layer, or HTTP over SSL) is a web protocol providing encrypted browsing. HTTPS can also be used by users and clients to verify that the correct device is being accessed. The security level provided by HTTPS is considered adequate for most commercial exchanges.

The Axis product can be configured to require HTTPS when users from different user groups (administrator, operator, viewer) connect.

To use HTTPS, an HTTPS certificate must first be installed. Go to System Options > Security > Certificates to install and manage certificates. See Certificates on page 37.

To enable HTTPS on the Axis product:

1. Go to System Options > Security > HTTPS

36

Page 35 Page 37
Image 36
Page 35 Page 37
Contents Axis Q1932-E PT Mount Thermal Network Camera About this document Legal ConsiderationsLiability Intellectual Property RightsSupport Learn MoreTable of Contents Axis Q1932-E PT Mount Thermal Network CameraConnectors Performance Considerations Connectors and Buttons Network ConnectorHardware Overview LED Indicators Power ConnectorRS485/RS422 Connector SD Card SlotAccess the Product Access from a BrowserAccess from the Internet Set the Root PasswordGo to Setup Events Live ViewControls on the Live View Click Use HttpsAxis Media Control viewer toolbar PTZ ControlsHow to Stream H.264 Media StreamsAxis Media Control AMC Alternative Methods of Accessing the Video Stream Axis Q1932-E PT Mount Thermal Network Camera Set Up the Product Basic SetupVideo Video StreamPixel Counter ImageStream Profiles 264Camera Settings Exposure SettingsOverlay Image AppearanceOverlay Image Use Overlay Text in an Action RuleGo to Video Overlay Image Under Overlay Settings, select Include text Privacy MaskGo to Events Action Rules Configure the Live View Default Viewer for BrowsersViewer Settings Browser Viewer DescriptionUser Defined Links Preset Positions PTZ Pan Tilt ZoomGuard Tour Install PTZ Driver Device SettingsAdvanced Control QueueAxis Q1932-E PT Mount Thermal Network Camera Set Up Motion Detection Windows DetectorsShock Detection Motion DetectionDefault values Parameter Object Size History Sensitivity High level 100%Low level 0% Install Application Go to Setup ApplicationsApplications Application LicensesInstall Axis Application Configure Axis Cross Line DetectionAxis Cross Line Detection Configure Axis Video Motion Detection Axis Video Motion DetectionAxis Q1932-E PT Mount Thermal Network Camera Setting Up an Action Rule EventsAdd Recipients Go to Events Action Rules and click AddSet Up Recurrences Set Up Email RecipientsCreate Schedules Go to Events Schedules and click AddAxis Q1932-E PT Mount Thermal Network Camera Recordings Recording ListContinuous Recording Go to Recordings ListLanguages System Options SecurityUsers IP Address FilterIeee CertificatesGo to System Options Security Ieee Basic TCP/IP Settings Go to Setup System Options Security CertificatesDate & Time NetworkIPv4 Address Configuration IPv6 Address ConfigurationAssign IP Address Using ARP/Ping ARP/PingAdvanced TCP/IP Settings Axis Internet Dynamic DNS ServiceDNS Configuration Axis Video Hosting System AvhsNTP Configuration Host Name ConfigurationLink-Local IPv4 Address NAT traversal port mapping for IPv4QoS Quality of Service Smtp emailUPnPTM can be disabled under System Options Network UPnPTM UPnPTMRTP/H.264 BonjourStorage SD CardMount and Unmount SD Card Format SD CardMaintenance Ports & DevicesNetwork Share COM PortSupport Support OverviewSystem Overview Logs & ReportsReset to Factory Default Settings Plain ConfigScripting File UploadAxis Q1932-E PT Mount Thermal Network Camera Troubleshooting Upgrade the FirmwareEmergency Recovery Procedure Check the FirmwareSymptoms, Possible Causes and Remedial Actions Problems setting the IP addressProduct cannot be accessed from a browser Product is accessible locally but not externallyProblems with streaming H.264 Video and image problems, generalVideo Camera Settings Storage and disk management problemsVideo cannot be recorded Technical Specifications Function/group Specifications Network Security InstallationMaintenance General Casing PowerConnectors RS485/422 Connector Performance ConsiderationsFunction Pin M3.3

Q1932E specifications

Axis Communications, a leading provider of network video solutions, offers a range of advanced surveillance cameras designed to meet the needs of various security applications. Among their innovative products is the Axis Q1932E, a robust thermal network camera that excels in challenging environments where visibility is compromised.

The Q1932E is particularly valued for its ability to detect and monitor objects and people in complete darkness, smoke, fog, or adverse weather conditions. This capability stems from its thermal imaging technology, which detects heat emitted by objects rather than relying on visible light. As a result, users can achieve reliable surveillance across different lighting conditions, making it ideal for critical applications like perimeter security, transportation, and infrastructure monitoring.

One of the main features of the Axis Q1932E is its resolution. The camera offers a thermal resolution of 384x288 pixels, allowing for detailed thermal imaging. This resolution is crucial for identifying potential threats even from a distance. The built-in digital Pan-Tilt-Zoom (dPTZ) capability allows users to zoom in on specific areas of interest, enhancing monitoring efficiency without losing sight of the broader scene.

Durability is another key characteristic of the Q1932E. It is designed with a weatherproof casing, complying with the IP66 standard, ensuring it can withstand harsh weather conditions such as rain, wind, and fluctuating temperatures. This rugged design makes it suitable for outdoor installations in various environments.

The camera also features Axis' advanced video analytics capabilities, enabling motion detection and edge analytics. These functionalities allow users to receive real-time alerts and notifications when unusual activity is detected, enhancing response times to potential security threats. The integration of Axis’ Zipstream technology further optimizes bandwidth and storage usage, reducing costs while maintaining high-quality video streams.

Installation is made convenient with Power over Ethernet (PoE) support, which allows both data and power to be delivered through a single cable, simplifying the setup process. Additionally, the camera supports various mounting options, providing flexibility to adapt to different surveillance needs.

In summary, the Axis Q1932E thermal network camera is a powerful tool for security professionals seeking to enhance their surveillance capabilities. With its superior thermal imaging, durability, advanced analytics, and ease of installation, it is an excellent choice for ensuring safety and security in any environment, regardless of the lighting conditions.
Top Page Image Contents