Axis Communications Q1604 user manual Storage and disk management problems, Storage disruption

Page 57

AXIS Q1604 Network Camera

Troubleshooting

Storage and disk management problems

Storage disruption

A storage disruption alarm is sent if a storage device is unavailable, removed, full, locked or if other

 

read or write problems occur. To identify the source of the problem, check the System Log under

 

System Options > Support > Logs & Reports. Depending on the problem, it might be necessary to

 

re-mount the storage device.

 

For information on how to set up a storage disruption alarm, see Events, on page 35.

Video cannot be recorded

Check that the SD card is not write protected (that is, read only).

SD card cannot be mounted

Reformat the SD card and then click Mount.

57

Image 57
Contents Axis Q1604 Network Camera Legal Considerations About this documentLiability Intellectual Property RightsLearn More SupportAxis Q1604 Network Camera Table of ContentsConnectors Performance Considerations Hardware Overview Hardware OverviewNetwork Connector Connectors and ButtonsConnector For technical specifications, seePower Connector LED IndicatorsAudio Connector SD Card SlotReplacing the lens Hardware Overview Status LED Behavior for Focus AssistantColor Green Amber RedAccessing the Product Accessing the ProductAccess from a Browser Start a browser Internet Explorer, Firefox, SafariAccessing the Product Access from the Internet Set the Root PasswordClick Use Https Live View Configure Capture ModeControls on the Live View Manual TriggerAxis Media Control viewer toolbar Go to Setup EventsTo show the manual trigger buttons in the Live View AMC Audio ControlsMedia Streams How to Stream H.264Media Streams Axis Media Control AMCQuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamJava applet supports simplex audio with G.711 encoding Accessing Audio StreamsSetting Up the Product Setting Up the ProductBasic Setup Adjust FocusSetting Up the Product Focus Assistant Video and Audio Video and AudioVideo Stream Pixel CounterClick Save to apply the new settings Pixel counter can be accessed fromImage 264Capture Mode Camera SettingsGo to Setup Video & Audio Camera Settings Stream ProfilesImage Appearance Exposure SettingsWhite Balance Wide Dynamic RangeShutter & Gain OverlaySet Shutter to IR cut filterPrivacy Mask Overlay ImageGo to Video & Audio Overlay Image Video and Audio Audio Settings Audio ModesAudio Input Audio Output Audio ClipsLive View Config Live View ConfigDefault Viewer for Browsers Go to Setup Live View Config Viewer SettingsUser Defined Links Output ButtonsFor more information about I/O ports, see I/O Ports, on Detectors DetectorsCamera Tampering Motion DetectionMotion Detection Parameters Set Up Motion Detection WindowsAudio Detection Default valuesLow level 0% Recommended valuesApplications Install ApplicationApplications Application LicensesAxis Q1604 Network Camera Events EventsGo to Events Action Rules and click Add Setting Up an Action RuleEvents Recipients Setting Up an Email RecipientRecipient Use with action Go to Events Recipients and click AddRecurrences SchedulesTo create a new schedule Go to Events Schedules and click AddRecordings RecordingsRecording List Continuous RecordingLanguages LanguagesSystem Options System OptionsSecurity UsersIeee CertificatesGo to System Options Security Ieee Click Install certificate and upload the certificate Go to Setup System Options Security CertificatesDate & Time Audio SupportSystem Options Network Basic TCP/IP SettingsAxis Internet Dynamic DNS Service Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service requires IPv4 DNS ConfigurationHost Name Configuration NTP ConfigurationLink-Local IPv4 Address NAT traversal port mapping for IPv4FTP QoS Quality of ServiceUPnPTM UPnPTM can be disabled under System Options Network UPnPTMRTP/H.264 BonjourSD Card System Options StorageNetwork Share Go to System Options Storage and click SD CardPorts & Devices MaintenancePorts Port StatusAdvanced System Options SupportReset to Factory Default Settings Plain ConfigFile Upload Troubleshooting TroubleshootingEmergency Recovery Procedure Checking the FirmwareSymptoms, Possible Causes and Remedial Actions Problems setting the IP addressProduct cannot be accessed from a browser Product is accessible locally but not externally Problems with streaming H.264Basic Video and image problems, general Status and Network indicator LEDs are flashing red rapidlySetup Video & Audio Camera Settings SettingsStorage disruption Storage and disk management problemsRe-mount the storage device Reformat the SD card and then click MountTechnical Specifications Technical SpecificationsMicrophone Specification Network Security Function/group Specifications Audio Audio streamingInput/output Audio input Audio outputConnectors Mm audio connectors stereo Pin terminal block for power inputTo max 40 V DC To deactivate Digital OutputPerformance Considerations Audio Input Audio OutputTip Microphone/Line Line out mono Ring Sleeve Ground M3.4

Q1604 specifications

The Axis Communications Q1604 is a powerful and versatile network camera designed for professional surveillance applications in various environments. Renowned for its high-quality imaging and robust performance, the Q1604 is engineered to deliver clear and detailed visuals, making it an ideal choice for security professionals.

One of the standout features of the Q1604 is its exceptional image quality, which is powered by advanced image sensor technology. It boasts an impressive resolution of 1920 x 1080 pixels, capturing Full HD video at 30 frames per second. This ensures that users receive sharp and clear images, even in challenging lighting conditions. The camera is equipped with Axis’ Lightfinder technology, allowing it to perform exceptionally well in low-light environments. This feature makes it suitable for 24/7 surveillance, delivering color images in near darkness.

The Q1604 also incorporates Wide Dynamic Range (WDR) technology, which enhances its ability to handle scenes with varying light levels. This is particularly useful in situations where bright sunlight and shadows coexist, allowing the camera to produce a balanced and detailed image. This ensures that critical details are not lost, enhancing overall situational awareness.

Another important aspect of the Q1604 is its flexible installation options. The camera supports Power over Ethernet (PoE), allowing it to receive power and network connectivity through a single cable. This reduces installation complexity and costs. Additionally, the camera features adjustable lenses, which provide the ability to customize the field of view according to specific surveillance needs.

Security is paramount in surveillance technology, and the Q1604 is designed with multiple security features to protect data integrity. It offers encrypted video transmission and password protection, ensuring that unauthorized users cannot access the system. Furthermore, the camera is compatible with a range of video management software (VMS) for integration into existing security ecosystems.

In conclusion, the Axis Communications Q1604 is a feature-rich network camera offering robust performance, high-resolution imaging, and advanced technologies. Its adaptability to varying lighting conditions, ease of installation, and strong security features make it one of the leading choices for professional surveillance solutions, catering to the demands of various industries while ensuring reliable monitoring and protection.