Axis Communications Q1604 user manual Technical Specifications

Page 58

AXIS Q1604 Network Camera

Technical Specifications

Technical Specifications

Function/group

Item

Specifications

 

 

 

Camera

Models

AXIS Q1604 720p resolution, indoor

 

 

 

 

Image sensor

Progressive scan RGB CMOS 1/3”

 

 

 

 

Lens

Varifocal 2.8 - 8 mm, F1.2, P-iris, IR corrected, CS-mount

 

 

Horizontal angle of view 100°-34°

 

 

Vertical angle of view 75°-26°

 

 

Diagonal angle of view 135°-43°

 

 

 

 

Minimum

Color: 0.1 lux, F1.2, B/W:0.02 lux, F1.2

 

illumination

Color: 0.4 lux, F1.2, B/W 0.06 lux, F1.2 with dynamic capture

 

 

 

 

Shutter time

1/24500 s to 2 s with power line frequency 50 Hz

 

 

1/29500 s to 2 s with power line frequency 60 Hz

 

 

With dynamic capture:

 

 

1/192 s to 1/37 s with power line frequency 50 Hz

 

 

1/231 s to 1/44 s with power line frequency 60 Hz

 

 

 

Video

Video

H.264 (MPEG-4 Part 10/AVC)

 

compression

H.264 Baseline and Main Profile

 

 

Motion JPEG

 

 

 

 

Resolutions

1280 x 960 (1 MP) to 160 x 90

 

 

1400 x 1050 (1.4 MP) scaled resolution available via VAPIX®

 

 

 

 

Frame rate H.264

30 fps in 60Hz capture mode, 25 fps in 50Hz capture mode

 

 

 

 

Frame rate

30 fps in 60Hz capture mode, 25 fps in 50Hz capture mode

 

Motion JPEG

 

 

 

 

 

Video streaming

Multi-stream H.264 and Motion JPEG

 

 

H.264: 2 individually configured streams in 720p and full frame rate

 

 

Motion JPEG: 2 individually configured streams in 720p and full frame rate

 

 

1 H.264 and 1 MJPEG streams in 720p and full frame rate

 

 

More streams if identical or limited in frame rate or resolution

 

 

Controllable frame rate and bandwidth

 

 

VBR/CBR H.264

 

 

 

 

Image settings

Compression, color, brightness, sharpness, contrast, white balance, exposure control,

 

 

exposure zones, backlight compensation, fine tuning of behavior at low light,

 

 

WDR: Up to 120dB (0.4 - 400,000 lux) depending on scene

 

 

Text and image overlay

 

 

Privacy mask

 

 

Mirroring of images

 

 

Rotation: 0°, 90°, 180°, 270°

 

 

Corridor Format™

 

 

 

 

Users

20 simultaneous users

 

 

Unlimited numbers of users using mulicast (H.264)

 

 

 

58

Image 58
Contents Axis Q1604 Network Camera Liability About this documentLegal Considerations Intellectual Property RightsSupport Learn MoreTable of Contents Axis Q1604 Network CameraConnectors Performance Considerations Hardware Overview Hardware OverviewConnector Connectors and ButtonsNetwork Connector For technical specifications, seeAudio Connector LED IndicatorsPower Connector SD Card SlotColor Hardware Overview Status LED Behavior for Focus AssistantReplacing the lens Green Amber RedAccess from a Browser Accessing the ProductAccessing the Product Start a browser Internet Explorer, Firefox, SafariSet the Root Password Accessing the Product Access from the InternetClick Use Https Controls on the Live View Configure Capture ModeLive View Manual TriggerTo show the manual trigger buttons in the Live View Go to Setup EventsAxis Media Control viewer toolbar AMC Audio ControlsMedia Streams How to Stream H.264Media Streams Axis Media Control AMCAlternative Methods of Accessing the Video Stream QuickTimeTM. The following paths can be usedAccessing Audio Streams Java applet supports simplex audio with G.711 encodingBasic Setup Setting Up the ProductSetting Up the Product Adjust FocusSetting Up the Product Focus Assistant Video Stream Video and AudioVideo and Audio Pixel CounterImage Pixel counter can be accessed fromClick Save to apply the new settings 264Go to Setup Video & Audio Camera Settings Camera SettingsCapture Mode Stream ProfilesWhite Balance Exposure SettingsImage Appearance Wide Dynamic RangeSet Shutter to OverlayShutter & Gain IR cut filterOverlay Image Privacy MaskGo to Video & Audio Overlay Image Audio Modes Video and Audio Audio SettingsAudio Input Audio Clips Audio OutputLive View Config Live View ConfigDefault Viewer for Browsers User Defined Links Viewer SettingsGo to Setup Live View Config Output ButtonsFor more information about I/O ports, see I/O Ports, on Camera Tampering DetectorsDetectors Motion DetectionSet Up Motion Detection Windows Motion Detection ParametersLow level 0% Default valuesAudio Detection Recommended valuesApplications Install ApplicationApplications Application LicensesAxis Q1604 Network Camera Events EventsSetting Up an Action Rule Go to Events Action Rules and click AddRecipient Use with action Setting Up an Email RecipientEvents Recipients Go to Events Recipients and click AddTo create a new schedule SchedulesRecurrences Go to Events Schedules and click AddRecording List RecordingsRecordings Continuous RecordingLanguages LanguagesSecurity System OptionsSystem Options UsersCertificates IeeeGo to System Options Security Ieee Date & Time Go to Setup System Options Security CertificatesClick Install certificate and upload the certificate Audio SupportBasic TCP/IP Settings System Options NetworkAxis Internet Dynamic DNS Service requires IPv4 Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service DNS ConfigurationLink-Local IPv4 Address NTP ConfigurationHost Name Configuration NAT traversal port mapping for IPv4QoS Quality of Service FTPRTP/H.264 UPnPTM can be disabled under System Options Network UPnPTMUPnPTM BonjourNetwork Share System Options StorageSD Card Go to System Options Storage and click SD CardPorts MaintenancePorts & Devices Port StatusSystem Options Support AdvancedPlain Config Reset to Factory Default SettingsFile Upload Emergency Recovery Procedure TroubleshootingTroubleshooting Checking the FirmwareProblems setting the IP address Symptoms, Possible Causes and Remedial ActionsProduct cannot be accessed from a browser Problems with streaming H.264 Product is accessible locally but not externallyBasic Setup Video & Audio Camera Settings Status and Network indicator LEDs are flashing red rapidlyVideo and image problems, general SettingsRe-mount the storage device Storage and disk management problemsStorage disruption Reformat the SD card and then click MountTechnical Specifications Technical SpecificationsInput/output Audio input Function/group Specifications Audio Audio streamingMicrophone Specification Network Security Audio outputConnectors To max 40 V DC Pin terminal block for power inputMm audio connectors stereo To deactivate Digital OutputAudio Input Audio Output Performance ConsiderationsTip Microphone/Line Line out mono Ring Sleeve Ground M3.4

Q1604 specifications

The Axis Communications Q1604 is a powerful and versatile network camera designed for professional surveillance applications in various environments. Renowned for its high-quality imaging and robust performance, the Q1604 is engineered to deliver clear and detailed visuals, making it an ideal choice for security professionals.

One of the standout features of the Q1604 is its exceptional image quality, which is powered by advanced image sensor technology. It boasts an impressive resolution of 1920 x 1080 pixels, capturing Full HD video at 30 frames per second. This ensures that users receive sharp and clear images, even in challenging lighting conditions. The camera is equipped with Axis’ Lightfinder technology, allowing it to perform exceptionally well in low-light environments. This feature makes it suitable for 24/7 surveillance, delivering color images in near darkness.

The Q1604 also incorporates Wide Dynamic Range (WDR) technology, which enhances its ability to handle scenes with varying light levels. This is particularly useful in situations where bright sunlight and shadows coexist, allowing the camera to produce a balanced and detailed image. This ensures that critical details are not lost, enhancing overall situational awareness.

Another important aspect of the Q1604 is its flexible installation options. The camera supports Power over Ethernet (PoE), allowing it to receive power and network connectivity through a single cable. This reduces installation complexity and costs. Additionally, the camera features adjustable lenses, which provide the ability to customize the field of view according to specific surveillance needs.

Security is paramount in surveillance technology, and the Q1604 is designed with multiple security features to protect data integrity. It offers encrypted video transmission and password protection, ensuring that unauthorized users cannot access the system. Furthermore, the camera is compatible with a range of video management software (VMS) for integration into existing security ecosystems.

In conclusion, the Axis Communications Q1604 is a feature-rich network camera offering robust performance, high-resolution imaging, and advanced technologies. Its adaptability to varying lighting conditions, ease of installation, and strong security features make it one of the leading choices for professional surveillance solutions, catering to the demands of various industries while ensuring reliable monitoring and protection.