Axis Communications P5512 PTZ Date & Time, Audio Support, To install a self-signed certificate

Page 43

AXIS P5512 PTZ Dome Network Camera

System Options

To install a self-signed certificate:

1.Go to Setup > System Options > Security > Certificates.

2.Click Create self-signed certificate and provide the requested information. To create and install a CA-signed certificate:

1.Create a self-signed certificate as described above.

2.Go to Setup > System Options > Security > Certificates.

3.Click Create certificate signing request and provide the requested information.

4.Copy the PEM-formatted request and send to the CA of your choice.

5.When the signed certificate is returned, click Install certificate and upload the certificate.

Server/Client certificates can be installed as Certificate from signing request or as Certificate and private key. Select Certificate and private key if the private key is to be upload as a separate file or if the certificate is in PKCS#12 format.

The Axis product is shipped with several preinstalled CA certificates. If required, additional CA certificates can be installed:

1.Go to Setup > System Options > Security > Certificates.

2.Click Install certificate and upload the certificate.

Audio Support

Select Enable audio support to allow clients to retrieve audio streams from the Axis product. For information on how to configure audio settings, see Audio Settings, on page 22.

Note

Deselecting this option will disable audio globally in the Axis product, for configured events and profiles with audio as well.

Date & Time

The Axis product’s date and time settings are configured under System Options > Date & Time.

Current Server Time displays the current date and time (24h clock). The time can be displayed in 12h clock in the text overlay (see below).

To change the date and time settings, select the preferred Time mode under New Server Time:

•Synchronize with computer time – Sets date and time according to the computer’s clock. With this option, date and time are set once and will not be updated automatically.

•Synchronize with NTP Server – Obtains date and time from an NTP server. With this option, date and time settings are updated continuously. For information on NTP settings, see NTP Configuration, on page 46.

If using a host name for the NTP server, a DNS server must be configured. See DNS Configuration, on page 45.

•Set manually – Allows you to manually set date and time.

If using an NTP server, select your Time zone from the drop-down list. If required, check Automatically adjust for daylight saving time changes.

The Date & Time Format Used in Images is the date and time format displayed as a text overlay in the video stream. Use the

predefined formats or see File Naming & Date/Time Formats in the online help for information on how to create custom date and time formats. To include date and time in the overlay text, go to Video & Audio and select Include date and Include time.

43

Page 42 Page 44
Image 43
Page 42 Page 44
Contents Axis P5512 PTZ Dome Network Camera Intellectual Property Rights About this documentLegal Considerations LiabilityLearn More SupportAxis P5512 PTZ Dome Network Camera Table of ContentsConnectors Performance Considerations Hardware Overview Hardware OverviewHardware Overview Connectors and Buttons Color Indication Hardware Overview LED IndicatorsStart a browser Internet Explorer, Firefox, Safari Accessing the ProductAccessing the Product Access from a BrowserControls on the Live View Accessing the Product Access from the InternetSet the Root Password Live ViewTo show the manual trigger buttons in the Live View Go to Setup EventsAxis Media Control viewer toolbar Manual TriggerAMC Audio Controls PTZ ControlsAxis P5512 PTZ Dome Network Camera Axis Media Control AMC How to Stream H.264Media Streams Media StreamsQuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamJava applet supports simplex audio with G.711 encoding Accessing Audio StreamsSetting Up the Product Setting Up the ProductBasic Setup Pixel Counter Video and AudioVideo and Audio Video Stream264 Click Save to apply the new settingsStream Profiles ImageWhite Balance Camera SettingsExposure Settings Image AppearanceOverlay Image SettingsOverlay Image Go to Events Action Rules Audio SettingsUsing Overlay Text in an Action Rule Audio ModesAudio Input Audio Output Audio ClipsLive View Config Live View ConfigDefault Viewer for Browsers Output Buttons Viewer SettingsGo to Setup Live View Config User Defined LinksAxis P5512 PTZ Dome Network Camera PTZ Pan Tilt Zoom Preset PositionsGo to PTZ Preset Positions PTZ Pan Tilt ZoomGo to PTZ Guard Tour and click Add PTZ Pan Tilt Zoom GatekeeperGuard Tour Osdi ZonesLimits Operator Same as administrator but with lower priorityPTZ Pan Tilt Zoom Advanced Control QueueMotion Detection Set Up Motion Detection WindowsDetectors DetectorsMotion Detection Parameters Audio DetectionApplication Licenses Install ApplicationApplications ApplicationsAxis P5512 PTZ Dome Network Camera Events EventsGo to Events Action Rules and click Add Setting Up an Action RuleTime PTZ ControlRecipient Use with action RecipientsGo to Events Recipients and click Add Go to Events Schedules and click Add Setting Up an Email RecipientSchedules RecurrencesContinuous Recording RecordingsRecordings Recording ListLanguages LanguagesUsers System OptionsSystem Options SecurityCertificates IeeeGo to System Options Security Ieee Date & Time To install a self-signed certificateGo to Setup System Options Security Certificates Click Install certificate and upload the certificateSystem Options Network Basic TCP/IP SettingsDNS Configuration Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service Axis Internet Dynamic DNS Service requires IPv4NAT traversal port mapping for IPv4 NTP ConfigurationHost Name Configuration Link-Local IPv4 AddressFTP QoS Quality of ServiceBonjour UPnPTM can be disabled under System Options Network UPnPTMUPnPTM RTP/H.264Ports & Devices System Options StorageSystem Overview MaintenanceSupport Support OverviewFile Upload Reset to Factory Default SettingsPlain Config ScriptingAxis P5512 PTZ Dome Network Camera Multi-Connector Cable sold separately Multi-Connector Cable sold separatelyFunction Pin Specifications Connector Checking the Firmware TroubleshootingTroubleshooting To upgrade, follow these instructionsProduct cannot be accessed from a browser Troubleshooting Emergency Recovery ProcedureSymptoms, Possible Causes and Remedial Actions Problems setting the IP addressProblems with streaming H.264 Product is accessible locally but not externallyBasic Storage and disk management problems Video and image problems, generalSetup Video & Audio Camera Settings SettingsTechnical Specifications Technical SpecificationsMemory Power Function/group Specifications Network SecurityInstallation Maintenance General CasingPerformance Considerations ConnectorsM4.4
Top Page Image Contents