Axis Communications P5512 user manual Image Settings, Go to Video Overlay Image

Page 19

AXIS P5512-E PTZ Dome Network Camera

Video

Image Settings

Autofocus enabled - Automatic focusing is enabled by default. If the focus position is changed manually using the focus bar, autofocus will be disabled even if enabled here. In this case, use the PTZ control panel to enable autofocus, see PTZ Controls, on page 10. If required, the focus control can be disabled under PTZ > Advanced > Controls.

Overlay

Overlays are used to provide extra information, for example for forensic video analysis or during product installation and configuration. Overlays are superimposed over the video stream.

An overlay text can display the current date and time, or a text string. When using a text string, modifiers can be used to display information such as the current bit rate or the current frame rate. For information about available modifiers, see File Naming &

Date/Time Formats in the online help .

It is also possible to display text when an action rule is triggered, see Using Overlay Text in an Action Rule.

To enable overlays:

1.Go to Video > Video Stream and select the Image tab.

2.To include an overlay image, select Include overlay image at the coordinates. The overlay image must first be uploaded to the Axis product, see Overlay Image.

3.To include date and time, select Include date and Include time.

4.To include a text string, select Include text and enter the text in the field. Modifiers can be used, see File Naming &

Date/Time Formats in the online help .

5.Define text overlay characteristics in the relevant fields.

6.Click Save.

To modify the date and time format, go to System Options > Date & Time. See Date & Time, on page 38.

Overlay Image

An overlay image is a static image superimposed over the video stream. The image, for example company logo, is used to provide extra information or to mask a part of the image.

To use an overlay image, the image must first be uploaded to the Axis product:

1.Go to Video > Overlay Image.

2.Click Browse and browse to the file.

3.Click Upload.

4.Select the image to use from the Use overlay image list.

5.Click Save.

To display the overlay image:

1.Go to Video > Video Stream and select the Image tab.

2.Under Overlay Settings, select Include overlay image at the coordinates and enter the X and Y coordinates.

3.Click Save.

For information about supported image formats, see the online help .

19

Image 19

Contents Axis P5512-E PTZ Dome Network Camera Intellectual Property Rights About this documentLegal Considerations LiabilityLearn More SupportAxis P5512-E PTZ Dome Network Camera Table of ContentsHardware Overview Hardware OverviewLED Indicators Hardware Overview Connectors and ButtonsStart a browser Internet Explorer, Firefox, Safari Accessing the ProductAccessing the Product Access from a BrowserSet the Root Password Accessing the Product Access from the InternetClick Use Https Go to Setup EventsLive View Controls on the Live ViewPTZ Controls Axis Media Control viewer toolbarAxis P5512-E PTZ Dome Network Camera Axis Media Control AMC How to Stream H.264Media Streams Media StreamsQuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamAxis P5512-E PTZ Dome Network Camera Setting Up the Product Setting Up the ProductBasic Setup Pixel Counter VideoVideo Video Stream264 Click Save to apply the new settingsStream Profiles ImageWhite Balance Camera SettingsExposure Settings Image AppearanceGo to Video Video Stream and select the Image tab Image SettingsOverlay Overlay ImageGo to Events Action Rules Using Overlay Text in an Action RuleBrowser Viewer Description Live View ConfigLive View Config Default Viewer for BrowsersUser Defined Links Viewer SettingsFor more information, please see the online help PTZ Pan Tilt Zoom Preset PositionsGo to PTZ Preset Positions PTZ Pan Tilt ZoomGo to PTZ Guard Tour and click Add PTZ Pan Tilt Zoom GatekeeperGuard Tour Osdi ZonesLimits Operator Same as administrator but with lower priorityPTZ Pan Tilt Zoom Advanced Control QueueMotion Detection Set Up Motion Detection WindowsDetectors DetectorsMotion Detection Parameters Application Licenses Install ApplicationApplications ApplicationsAxis P5512-E PTZ Dome Network Camera Events EventsPTZ Control Setting Up an Action RuleGo to Events Action Rules and click Add Go to Events Recipients and click Add Setting Up an Email RecipientRecipients Recipient Use with actionGo to Events Schedules and click Add SchedulesRecurrences To create a new scheduleContinuous Recording RecordingsRecordings Recording ListLanguages LanguagesUsers System OptionsSystem Options SecurityCertificates IeeeGo to System Options Security Ieee Network Basic TCP/IP SettingsGo to Setup System Options Security Certificates Date & TimeARP/Ping IPv4 Address ConfigurationIPv6 Address Configuration Assign IP Address Using ARP/PingDNS Configuration Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service Axis Internet Dynamic DNS Service requires IPv4NAT traversal port mapping for IPv4 NTP ConfigurationHost Name Configuration Link-Local IPv4 AddressFTP QoS Quality of ServiceBonjour StorageUPnPTM RTP/H.264Network Share MaintenanceGo to System Options Storage Click Network Share Logs & Reports SupportSupport Overview System OverviewPlain Config Reset to Factory Default SettingsFile Upload Checking the Firmware TroubleshootingTroubleshooting To upgrade, follow these instructionsProduct cannot be accessed from a browser Troubleshooting Emergency Recovery ProcedureSymptoms, Possible Causes and Remedial Actions Problems setting the IP addressProblems with streaming H.264 Product is accessible locally but not externallyBasic Key frames Video and image problems, generalVideo Camera Settings Storage and disk management problemsTechnical Specifications Technical SpecificationsMemory Power Function/group Specifications System ApplicationInstallation Maintenance General CasingPerformance Considerations ConnectorsFunction/group Specifications Weight Kg 2.6 lb Included Accessories Decoder 1-user license VideoM4.3