Axis Communications P5414-E user manual Control Queue, Controls

Page 31

AXIS P5414–E PTZ Dome Network Camera

PTZ (Pan Tilt Zoom)

Move speed sets the speed of the camera’s pan and tilt movements. The default setting is maximum speed.

When using a joystick (or emulating one with the mouse) the Enable proportional speed setting can be used to reduce the maximum pan/tilt movement speed, i.e. the speed the camera view moves at when the joystick is pushed all the way out in any direction. This is useful then the view is zoomed in on an object.

See the online help for more information.

Controls

Advanced PTZ settings can be configured under PTZ > Advanced > Controls.

The Panel Shortcut Command Buttons list shows the user-defined buttons that can be accessed from the Live View page’s Ctrl panel. These buttons can be used to provide direct access to commands issued using the VAPIX® application programming interface. Click Add to add a new shortcut command button.

The following PTZ controls are enabled by default:

Pan control

Tilt control

Zoom control

Focus control

To disable specific controls, deselect the options under Enable/Disable controls.

Note

Disabling PTZ controls will not affect preset positions. For example, if the tilt control is disabled, the product can still move to preset positions that require a tilt movement.

Control Queue

The administrator can set up a queue for PTZ controllers from PTZ > Control Queue. Once set up, the PTZ Control Queue buttons appear in the Live View page offering one viewer exclusive control for a limited period of time. Other users will be placed in queue.

31

Image 31
Contents Axis P5414-E PTZ Dome Network Camera Intellectual Property Rights About this DocumentLegal Considerations LiabilityLearn More SupportAxis P5414-E PTZ Dome Network Camera Table of ContentsConnectors Performance Considerations RJ45 Ethernet connector with Power over Ethernet Plus PoE+ Connectors and ButtonsNetwork Connector For technical specifications, seeSD Card Slot ConnectorPower Connector Audio ConnectorColor Indication LED IndicatorsCompleted Access from a Browser Access the ProductStart a browser Internet Explorer, Firefox, Safari Set the Root Password Access from the InternetClick Use Https Manual Trigger Go to Setup EventsLive View Controls on the Live ViewAMC Audio Controls Axis Media Control viewer toolbarPTZ Controls To show the manual trigger buttons in the Live ViewAxis P5414-E PTZ Dome Network Camera Media Streams How to Stream H.264Axis Media Control AMC QuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamJava applet supports simplex audio with G.711 encoding Access Audio StreamsBasic Setup Set Up the ProductVideo Stream Video and AudioImage 264 Click Save to apply the new settingsStream Profiles Camera SettingsDay/Night OverlayShutter & Gain Set Shutter toGo to Video & Audio Video Stream and select the Image tab Overlay ImageGo to Video & Audio Overlay Image Use Overlay Text in an Action Rule Privacy MaskGo to Events Action Rules Audio Modes Audio SettingsAudio Input Audio Output Audio ClipsDefault Viewer for Browsers Configure the Live ViewOutput Buttons Viewer SettingsGo to Setup Live View Config User Defined LinksAxis P5414-E PTZ Dome Network Camera Guard Tour Preset PositionsPTZ Pan Tilt Zoom GatekeeperFormats in the online help Osdi ZonesAdvanced LimitsControls Control QueueOperator Same as administrator but with lower priority Go to Detectors Motion Detection Set Up Motion Detection WindowsDetectors Motion DetectionMotion Detection Parameters Audio DetectionApplication Licenses Install ApplicationGo to Setup Applications ApplicationsAxis P5414-E PTZ Dome Network Camera Go to Events Action Rules and click Add Set Up Action RulesEvents Convert Event Types to Action RulesTriggers Actions Add RecipientsRecipient Types Recipient Use with action Set Up Email RecipientsGo to Events Schedules and click Add Set Up RecurrencesCreate Schedules To create a new scheduleGo to Recordings List RecordingsRecording List Continuous RecordingClick Save to save and start the recording Languages IP Address Filter System OptionsSecurity UsersCertificates IeeeGo to System Options Security Ieee Date & Time To install a self-signed certificateGo to Setup System Options Security Certificates Click Install certificate and upload the certificateNetwork Basic TCP/IP SettingsDNS Configuration Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service Axis Internet Dynamic DNS Service requires IPv4NAT traversal port mapping for IPv4 NTP ConfigurationHost Name Configuration Link-Local IPv4 AddressFTP QoS Quality of ServiceRTP/H.264 UPnPTM can be disabled under System Options Network UPnPTMSmtp email UPnPTMNetwork Share StorageBonjour SD CardPort Status MaintenancePorts & Devices PortsLogs & Reports SupportSupport Overview System OverviewPlain Config Reset to Factory Default SettingsFile Upload Repainting the Camera Check the Firmware TroubleshootingUpgrade the Firmware Firmware To upgrade the product’s firmwareProduct cannot be accessed from a browser Symptoms, Possible Causes and Remedial ActionsEmergency Recovery Procedure Problems setting the IP addressProblems with streaming H.264 Product is accessible locally but not externallyBasic Storage and disk management problems Video and image problems, generalSetup Video & Audio Camera Settings SettingsVideo cannot be recorded Technical Specifications Power Function/group Specifications Network SecurityInstallation Maintenance General CasingTerminal Connector ConnectorsFunction Pin Microphone/Line Performance ConsiderationsTip Audio InputM3.2