Axis Communications P5414-E Date & Time, Audio Support, To install a self-signed certificate

Page 47

AXIS P5414–E PTZ Dome Network Camera

System Options

To install a self-signed certificate:

1.Go to Setup > System Options > Security > Certificates .

2.Click Create self-signed certificate and provide the requested information. To create and install a CA-signed certificate:

1.Create a self-signed certificate as described above.

2.Go to Setup > System Options > Security > Certificates .

3.Click Create certificate signing request and provide the requested information.

4.Copy the PEM-formatted request and send to the CA of your choice.

5.When the signed certificate is returned, click Install certificate and upload the certificate.

Server/Client certificates can be installed as Certificate from signing request or as Certificate and private key. Select Certificate and private key if the private key is to be upload as a separate file or if the certificate is in PKCS#12 format.

The Axis product is shipped with several preinstalled CA certificates . If required, additional CA certificates can be installed:

1.Go to Setup > System Options > Security > Certificates .

2.Click Install certificate and upload the certificate.

Audio Support

Select Enable audio support to allow clients to retrieve audio streams from the Axis product. For information on how to configure audio settings, see Audio Settings on page 24.

Note

Deselecting this option will disable audio globally in the Axis product, for configured events and profiles with audio as well.

Date & Time

The Axis product’s date and time settings are configured under System Options > Date & Time.

Current Server Time displays the current date and time (24h clock). The time can be displayed in 12h clock in the text overlay (see below).

To change the date and time settings, select the preferred Time mode under New Server Time:

•Synchronize with computer time – Sets date and time according to the computer’s clock. With this option, date and time are set once and will not be updated automatically.

•Synchronize with NTP Server – Obtains date and time from an NTP server. With this option, date and time settings are updated continuously. For information on NTP settings, see NTP Configuration on page 50.

If using a host name for the NTP server, a DNS server must be configured. See DNS Configuration on page 49.

•Set manually – Allows you to manually set date and time.

If using an NTP server, select your Time zone from the drop-down list. If required, check Automatically adjust for daylight saving time changes.

The Date & Time Format Used in Images is the date and time format displayed as a text overlay in the video stream. Use the

predefined formats or see File Naming & Date/Time Formats in the online help for information on how to create custom date and time formats. To include date and time in the overlay text, go to Video & Audio and select Include date and Include time.

47

Page 46 Page 48
Image 47
Page 46 Page 48
Contents Axis P5414-E PTZ Dome Network Camera Intellectual Property Rights About this DocumentLegal Considerations LiabilityLearn More SupportAxis P5414-E PTZ Dome Network Camera Table of ContentsConnectors Performance Considerations RJ45 Ethernet connector with Power over Ethernet Plus PoE+ Connectors and ButtonsNetwork Connector For technical specifications, seeSD Card Slot ConnectorPower Connector Audio ConnectorCompleted LED IndicatorsColor Indication Start a browser Internet Explorer, Firefox, Safari Access the ProductAccess from a Browser Click Use Https Access from the InternetSet the Root Password Manual Trigger Go to Setup EventsLive View Controls on the Live ViewAMC Audio Controls Axis Media Control viewer toolbarPTZ Controls To show the manual trigger buttons in the Live ViewAxis P5414-E PTZ Dome Network Camera Axis Media Control AMC How to Stream H.264Media Streams QuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamJava applet supports simplex audio with G.711 encoding Access Audio StreamsBasic Setup Set Up the ProductImage Video and AudioVideo Stream 264 Click Save to apply the new settingsStream Profiles Camera SettingsDay/Night OverlayShutter & Gain Set Shutter toGo to Video & Audio Overlay Image Overlay ImageGo to Video & Audio Video Stream and select the Image tab Go to Events Action Rules Privacy MaskUse Overlay Text in an Action Rule Audio Input Audio SettingsAudio Modes Audio Output Audio ClipsDefault Viewer for Browsers Configure the Live ViewOutput Buttons Viewer SettingsGo to Setup Live View Config User Defined LinksAxis P5414-E PTZ Dome Network Camera Guard Tour Preset PositionsPTZ Pan Tilt Zoom GatekeeperFormats in the online help Osdi ZonesAdvanced LimitsControls Control QueueOperator Same as administrator but with lower priority Go to Detectors Motion Detection Set Up Motion Detection WindowsDetectors Motion DetectionMotion Detection Parameters Audio DetectionApplication Licenses Install ApplicationGo to Setup Applications ApplicationsAxis P5414-E PTZ Dome Network Camera Go to Events Action Rules and click Add Set Up Action RulesEvents Convert Event Types to Action RulesTriggers Recipient Types Add RecipientsActions Recipient Use with action Set Up Email RecipientsGo to Events Schedules and click Add Set Up RecurrencesCreate Schedules To create a new scheduleGo to Recordings List RecordingsRecording List Continuous RecordingClick Save to save and start the recording Languages IP Address Filter System OptionsSecurity UsersGo to System Options Security Ieee IeeeCertificates Date & Time To install a self-signed certificateGo to Setup System Options Security Certificates Click Install certificate and upload the certificateNetwork Basic TCP/IP SettingsDNS Configuration Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service Axis Internet Dynamic DNS Service requires IPv4NAT traversal port mapping for IPv4 NTP ConfigurationHost Name Configuration Link-Local IPv4 AddressFTP QoS Quality of ServiceRTP/H.264 UPnPTM can be disabled under System Options Network UPnPTMSmtp email UPnPTMNetwork Share StorageBonjour SD CardPort Status MaintenancePorts & Devices PortsLogs & Reports SupportSupport Overview System OverviewFile Upload Reset to Factory Default SettingsPlain Config Repainting the Camera Check the Firmware TroubleshootingUpgrade the Firmware Firmware To upgrade the product’s firmwareProduct cannot be accessed from a browser Symptoms, Possible Causes and Remedial ActionsEmergency Recovery Procedure Problems setting the IP addressBasic Product is accessible locally but not externallyProblems with streaming H.264 Storage and disk management problems Video and image problems, generalSetup Video & Audio Camera Settings SettingsVideo cannot be recorded Technical Specifications Power Function/group Specifications Network SecurityInstallation Maintenance General CasingTerminal Connector ConnectorsFunction Pin Microphone/Line Performance ConsiderationsTip Audio InputM3.2
Top Page Image Contents