Axis Communications P5414-E user manual Advanced TCP/IP Settings, Axis Video Hosting System Avhs

Page 49

AXIS P5414–E PTZ Dome Network Camera

System Options

ping -l 408 -t <IP address>

Windows example (this may require that you run the command prompt as an administrator)

arp -s 192.168.0.125 00-40-8c-18-10-00 ping -l 408 -t 192.168.0.125

4.Check that the network cable is connected and then restart the product by disconnecting and reconnecting power.

5.Close the command prompt when the product responds with Reply from 192.168.0.125:... or similar.

6.Open a browser and type http://<IP address> in the Location/Address field.

For other methods of assigning the IP address, see the Installation and Management Software CD or the document Assign an IP Address and Access the Video Stream on Axis Support web at www.axis.com/techsup

Note

•To open a command prompt in Windows, open the Start menu and type cmd in the Run/Search field.

•To use the ARP command in Windows 8/Windows 7/Windows Vista, right-click the command prompt icon and select Run as administrator.

•To open a command prompt in Mac OS X, open the Terminal utility from Application > Utilities.

AXIS Video Hosting System (AVHS)

AVHS used in conjunction with an AVHS service, provides easy and secure Internet access to live and recorded video accessible from any location. For more information and help to find a local AVHS Service Provider go to www.axis.com/hosting

The AVHS settings are configured under System Options > Network > TCP IP > Basic. The possibility to connect to an AVHS service is enabled by default. To disable, clear the Enable AVHS box.

One-click enabled - Press and hold the product’s control button (see Hardware Overview on page 6 ) for about 3 seconds to connect to an AVHS service over the Internet. Once registered, Always will be enabled and the Axis product stays connected to the AVHS service. If the product is not registered within 24 hours from when the button is pressed, the product will disconnect from the AVHS service.

Always - The Axis product will constantly attempt to connect to the AVHS service over the Internet. Once registered the product will stay connected to the service. This option can be used when the product is already installed and it is not convenient to use the one-click installation.

AXIS Internet Dynamic DNS Service

AXIS Internet Dynamic DNS Service assigns a host name for easy access to the product. For more information, see www.axiscam.net

To register the Axis product with AXIS Internet Dynamic DNS Service, go to System Options > Network > TCP/IP > Basic. Under Services, click the AXIS Internet Dynamic DNS Service Settings button (requires access to the Internet). The domain name currently registered at AXIS Internet Dynamic DNS service for the product can at any time be removed.

Note

AXIS Internet Dynamic DNS Service requires IPv4.

Advanced TCP/IP Settings

DNS Configuration

DNS (Domain Name Service) provides the translation of host names to IP addresses. The DNS settings are configured under System Options > Network > TCP/IP > Advanced.

Select Obtain DNS server address via DHCP to use the DNS settings provided by the DHCP server.

To make manual settings, select Use the following DNS server address and specify the following:

49

Page 48 Page 50
Image 49
Page 48 Page 50
Contents Axis P5414-E PTZ Dome Network Camera Legal Considerations About this DocumentLiability Intellectual Property RightsLearn More SupportAxis P5414-E PTZ Dome Network Camera Table of ContentsConnectors Performance Considerations Network Connector Connectors and ButtonsFor technical specifications, see RJ45 Ethernet connector with Power over Ethernet Plus PoE+Power Connector ConnectorAudio Connector SD Card SlotColor Indication LED IndicatorsCompleted Access from a Browser Access the ProductStart a browser Internet Explorer, Firefox, Safari Set the Root Password Access from the InternetClick Use Https Live View Go to Setup EventsControls on the Live View Manual TriggerPTZ Controls Axis Media Control viewer toolbarTo show the manual trigger buttons in the Live View AMC Audio ControlsAxis P5414-E PTZ Dome Network Camera Media Streams How to Stream H.264Axis Media Control AMC QuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamJava applet supports simplex audio with G.711 encoding Access Audio StreamsBasic Setup Set Up the ProductVideo Stream Video and AudioImage 264 Click Save to apply the new settingsStream Profiles Camera SettingsShutter & Gain OverlaySet Shutter to Day/NightGo to Video & Audio Video Stream and select the Image tab Overlay ImageGo to Video & Audio Overlay Image Use Overlay Text in an Action Rule Privacy MaskGo to Events Action Rules Audio Modes Audio SettingsAudio Input Audio Output Audio ClipsDefault Viewer for Browsers Configure the Live ViewGo to Setup Live View Config Viewer SettingsUser Defined Links Output ButtonsAxis P5414-E PTZ Dome Network Camera PTZ Pan Tilt Zoom Preset PositionsGatekeeper Guard TourAdvanced Osdi ZonesLimits Formats in the online helpControls Control QueueOperator Same as administrator but with lower priority Detectors Set Up Motion Detection WindowsMotion Detection Go to Detectors Motion DetectionMotion Detection Parameters Audio DetectionGo to Setup Applications Install ApplicationApplications Application LicensesAxis P5414-E PTZ Dome Network Camera Events Set Up Action RulesConvert Event Types to Action Rules Go to Events Action Rules and click AddTriggers Actions Add RecipientsRecipient Types Recipient Use with action Set Up Email RecipientsCreate Schedules Set Up RecurrencesTo create a new schedule Go to Events Schedules and click AddRecording List RecordingsContinuous Recording Go to Recordings ListClick Save to save and start the recording Languages Security System OptionsUsers IP Address FilterCertificates IeeeGo to System Options Security Ieee Go to Setup System Options Security Certificates To install a self-signed certificateClick Install certificate and upload the certificate Date & TimeNetwork Basic TCP/IP SettingsAxis Internet Dynamic DNS Service Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service requires IPv4 DNS ConfigurationHost Name Configuration NTP ConfigurationLink-Local IPv4 Address NAT traversal port mapping for IPv4FTP QoS Quality of ServiceSmtp email UPnPTM can be disabled under System Options Network UPnPTMUPnPTM RTP/H.264Bonjour StorageSD Card Network SharePorts & Devices MaintenancePorts Port StatusSupport Overview SupportSystem Overview Logs & ReportsPlain Config Reset to Factory Default SettingsFile Upload Repainting the Camera Upgrade the Firmware TroubleshootingFirmware To upgrade the product’s firmware Check the FirmwareEmergency Recovery Procedure Symptoms, Possible Causes and Remedial ActionsProblems setting the IP address Product cannot be accessed from a browserProblems with streaming H.264 Product is accessible locally but not externallyBasic Setup Video & Audio Camera Settings Video and image problems, generalSettings Storage and disk management problemsVideo cannot be recorded Technical Specifications Installation Function/group Specifications Network SecurityMaintenance General Casing PowerTerminal Connector ConnectorsFunction Pin Tip Performance ConsiderationsAudio Input Microphone/LineM3.2
Top Page Image Contents