Axis Communications P3363-VE user manual Events

Page 36

AXIS P3363–VE Network Camera

Events

Events

The Axis product can be configured to perform actions when different events occur, for example, start a recording when motion is detected. The set of conditions that defines how and when the action is triggered is called an Action Rule.

Available Action Rule triggers and conditions include:

•Applications — use installed applications to trigger the rule, see Applications, on page 34.

•Detectors

-Audio Detection — trigger the rule when audio is detected, see Audio Detection, on page 33.

-Day/Night Mode — trigger the rule when the product switches between day mode (IR cut filter on) and night mode (IR cut filter off). This can for example be used to control an external infrared (IR) light connected

to an output port.

-Motion Detection — trigger the rule when motion is detected, see Motion Detection, on page 31.

-Tampering — trigger the rule when tampering is detected, see Camera Tampering, on page 31.

•Hardware

-Fan — trigger the rule if the fan is malfunctioning. This can for example be used to send maintenance notifications.

-Heater — trigger the rule if the heater is malfunctioning. This can for example be used to send maintenance notifications.

-Network — trigger the rule if network connection is lost or restored. This can for example be used to start recording to the SD card.

-Temperature — trigger the rule if the temperature falls outside or inside the operating range of the product. This can for example be used to send maintenance notifications.

•Input Signal

-Digital Input Port — trigger the rule when an I/O port receives a signal from a connected device, see I/O Ports, on page 50.

-Manual Trigger — trigger the rule using the Manual Trigger button in the Live View page, see Controls on the Live View Page, on page 11. This can for example be used to validate actions during product installation and configuration.

•PTZ

-Moving — trigger the rule when the camera view moves due to a PTZ operation. This can for example be used as an additional condition to prevent an action rule triggered by motion detection to record video while the camera view moves due to a PTZ operation.

-Preset Reached — trigger the rule when the camera stops at a preset position. This can be for example be used with the Send Images action to upload images from the preset position.

•Storage

-Available — trigger the rule when the storage device is unmounted or removed. This can for example be used to send maintenance notifications.

-Full — trigger the rule when the storage device is full. Under normal operation, the oldest recordings will be overwritten to prevent the storage device from becoming full.

-Locked — trigger the rule if the storage device is locked (write protected).

36

Page 35 Page 37
Image 36
Page 35 Page 37
Contents Axis P3363-VE Network Camera About this Document Legal ConsiderationsLiability Intellectual Property RightsSupport Learn MoreTable of Contents Axis P3363-VE Network CameraTechnical Specifications Connectors Hardware OverviewHardware Overview LED Indicators Color IndicationAxis P3363-VE Network Camera Accessing the Product Accessing the ProductAccess from a Browser Accessing the Product Access from the Internet Set the Root PasswordSet Power Line Frequency Network TCP/IP AdvancedLive View Controls on the Live ViewAxis Media Control viewer toolbar PTZ Controls AMC Audio ControlsAxis P3363-VE Network Camera How to Stream H.264 Media StreamsMedia Streams Axis Media Control AMCAlternative Methods of Accessing the Video Stream Accessing Audio Streams Setting Up the Product Setting Up the ProductBasic Setup Video and Audio Video and AudioVideo Stream ImageStream Profiles 264Video and Audio Camera Settings Exposure SettingsImage Appearance White BalanceIris adjustment View AreaSet Shutter to Day/NightOverlay Overlay ImageGo to Video & Audio Video Stream and select the Image tab Go to Video & Audio Overlay ImagePrivacy Mask Focus & ZoomGo to Video & Audio Focus & Zoom Audio Settings Audio ModesAudio Input Audio Clips Audio OutputLive View Config Live View ConfigDefault Viewer for Browsers Viewer Settings Go to Setup Live View ConfigUser Defined Links Output ButtonsAxis P3363-VE Network Camera Preset Positions PTZ Pan Tilt ZoomPTZ Pan Tilt Zoom Guard TourAdvanced LimitsControls Detectors DetectorsCamera Tampering Motion DetectionSet Up Motion Detection Windows Motion Detection ParametersDefault values Audio DetectionLow level 0% Recommended valuesInstall Application ApplicationsApplications Application LicensesAxis P3363-VE Network Camera Events EventsSetting Up an Action Rule SystemTime PTZ ControlRecipients SchedulesRecipient Use with action Go to Events Recipients and click AddRecurrences Go to Events Recurrences and click AddRecordings RecordingsRecording List Continuous RecordingSystem Options System OptionsSecurity UsersIeee Go to System Options Security HttpsCertificates CertificatesGo to System Options Security Ieee Date & Time Audio SupportGo to System Options Security Certificates Basic TCP/IP Settings NetworkAdvanced TCP/IP Settings Axis Internet Dynamic DNS ServiceDNS Configuration NTP ConfigurationLink-Local IPv4 Address NAT traversal port mapping for IPv4QoS Quality of Service Smtp emailStorage UPnPTMRTP/H.264 BonjourPorts & Devices Network SharePorts Go to System Options Storage Click Network ShareMaintenance SupportReset to Factory Default Settings Plain ConfigScripting File UploadAxis P3363-VE Network Camera Troubleshooting TroubleshootingEmergency Recovery Procedure Checking the FirmwareSymptoms, Possible Causes and Remedial Actions Problems setting the IP addressProduct cannot be accessed from a browser Product is accessible locally but not externally Problems with streaming H.264Basic Status and Network indicator LEDs are flashing red rapidly Video and image problems, generalSetup Video & Audio Camera Settings SettingsFocus, zoom, and fan Remote focus and zoom doTechnical Specifications Technical SpecificationsFunction/group Specifications Network Security Alarm actionsPower ConnectorsPerformance Considerations M3.2
Related manuals
Manual 64 pages 7.22 Kb

P3363-VE specifications

Axis Communications P3363-VE is an advanced network camera specifically designed for outdoor surveillance applications. Renowned for its superior imaging capabilities and robust construction, the P3363-VE is a popular choice among professionals in security and surveillance sectors. This camera is engineered to perform reliably in challenging environments, making it suitable for a wide range of applications, including city surveillance, transportation hubs, and critical infrastructure protection.

One of the key features of the P3363-VE is its 3-megapixel resolution, which provides high-definition video quality with exceptional clarity. This enables the camera to capture detailed images even in low-light conditions, ensuring that critical incidents can be monitored without compromise. The camera is equipped with Automatic Day/Night functionality, allowing it to adapt seamlessly to varying light conditions, ensuring optimal performance around the clock.

The P3363-VE incorporates Axis' innovative Artpec-4 chip, which enhances image processing capabilities. This technology not only improves the camera’s ability to capture clear and sharp images in real-time but also facilitates advanced analytics. With features such as motion detection and video tampering alarms, the camera can intelligently monitor for unusual activity and send timely alerts.

Another significant feature of the P3363-VE is its weatherproof design, certified to IP66 and NEMA 4X standards. This robust construction allows the camera to operate effectively in harsh weather conditions, protecting it against rain, dust, and extreme temperatures. Additionally, the camera’s rugged housing is resistant to vandalism, ensuring that it retains its functionality in high-risk environments.

For versatility in installation, the P3363-VE supports Power over Ethernet (PoE), which simplifies the setup process by requiring only a single cable for both power and data transmission. This not only reduces installation costs but also enhances the flexibility of camera placement.

The P3363-VE is compatible with a range of video management software, making it easy to integrate into existing systems. Moreover, its support for H.264 and Motion JPEG ensures efficient video compression without compromising quality, allowing for reduced bandwidth and storage requirements.

In summary, the Axis Communications P3363-VE stands out due to its combination of high-resolution imaging, advanced processing capabilities, and rugged, weather-resistant design. These features make it an excellent choice for organizations seeking reliable outdoor surveillance solutions. Whether for protecting property or enhancing public safety, the P3363-VE camera provides the performance needed in today’s demanding security landscape.
Top Page Image Contents