Axis Communications P3363-VE user manual QoS Quality of Service, Smtp email

Page 48

AXIS P3363–VE Network Camera

System Options

Note

This FTP server has nothing to do with the product’s ability to transfer images via FTP to other locations and servers.

RTSP

The RTSP server running in the Axis product allows a connecting client to start an H.264 stream. The RTSP port number can be changed under System Options > Network > TCP/IP > Advanced. The default port is 554.

Note

H.264 video streams will not be available if the RTSP server is disabled.

SOCKS

SOCKS is a networking proxy protocol. The Axis product can be configured to use a SOCKS server to reach networks on the other side of a firewall or proxy server. This functionality is useful if the Axis product is located on a local network behind a firewall, and notifications, uploads, alarms, etc need to be sent to a destination outside the local network (for example the Internet).

SOCKS is configured under System Options > Network > SOCKS. For more information, see the online help .

QoS (Quality of Service)

QoS (Quality of Service) guarantees a certain level of a specified resource to selected traffic on a network. A QoS-aware network prioritizes network traffic and provides a greater network reliability by controlling the amount of bandwidth an application may use.

The QoS settings are configured under System Options > Network > QoS. Using DSCP (Differentiated Services Codepoint) values, the Axis product can mark the following types of traffic: live video, live audio, event/alarm traffic and management traffic.

Note

Live audio DSCP will be equal to live video DSCP if H.264 over RTSP is used.

SMTP (email)

To send email messages from the Axis product via SMTP (Simple Mail Transfer Protocol), an SMTP mail server must be set up. This is done under System Options > Network > SMTP (email).

Enter the host names or IP addresses and port numbers for the primary and secondary mail servers in the fields provided. A From email address is also required. If the mail server requires authentication, check Use authentication to log in to this server and enter the necessary information.

SNMP

The Simple Network Management Protocol (SNMP) allows remote management of network devices. An SNMP community is the group of devices and management station running SNMP. Community names are used to identify groups.

The Axis product can be configured to support SNMP on the System Options > Network > SNMP page.

Depending on the level of security required, select the version on SNMP to use.

SNMP v1/v2 provides the lowest level of security. The community name can be specified as a password for read or read/write access to all supported SNMP devices. The default password for the Read community is public and the default password for the Write community is write.

Note

If HTTPS is enabled, SNMP v1 and SNMP v2c should be disabled.

Traps for SNMP v1/v2 are used by the Axis product to send messages to a management system on important events and status changes. Check Enable traps and enter the IP address where the trap message should be sent and the Trap community that should receive the message.

48

Page 47 Page 49
Image 48
Page 47 Page 49
Contents Axis P3363-VE Network Camera About this Document Legal ConsiderationsLiability Intellectual Property RightsSupport Learn MoreTable of Contents Axis P3363-VE Network CameraTechnical Specifications Connectors Hardware OverviewHardware Overview LED Indicators Color IndicationAxis P3363-VE Network Camera Accessing the Product Accessing the ProductAccess from a Browser Accessing the Product Access from the Internet Set the Root PasswordSet Power Line Frequency Network TCP/IP AdvancedLive View Controls on the Live ViewAxis Media Control viewer toolbar PTZ Controls AMC Audio ControlsAxis P3363-VE Network Camera How to Stream H.264 Media StreamsMedia Streams Axis Media Control AMCAlternative Methods of Accessing the Video Stream Accessing Audio Streams Setting Up the Product Setting Up the ProductBasic Setup Video and Audio Video and AudioVideo Stream ImageStream Profiles 264Video and Audio Camera Settings Exposure SettingsImage Appearance White BalanceIris adjustment View AreaSet Shutter to Day/NightOverlay Overlay ImageGo to Video & Audio Video Stream and select the Image tab Go to Video & Audio Overlay ImagePrivacy Mask Focus & ZoomGo to Video & Audio Focus & Zoom Audio Settings Audio ModesAudio Input Audio Clips Audio OutputLive View Config Live View ConfigDefault Viewer for Browsers Viewer Settings Go to Setup Live View ConfigUser Defined Links Output ButtonsAxis P3363-VE Network Camera Preset Positions PTZ Pan Tilt ZoomPTZ Pan Tilt Zoom Guard TourAdvanced LimitsControls Detectors DetectorsCamera Tampering Motion DetectionSet Up Motion Detection Windows Motion Detection ParametersDefault values Audio DetectionLow level 0% Recommended valuesInstall Application ApplicationsApplications Application LicensesAxis P3363-VE Network Camera Events EventsSetting Up an Action Rule SystemTime PTZ ControlRecipients SchedulesRecipient Use with action Go to Events Recipients and click AddRecurrences Go to Events Recurrences and click AddRecordings RecordingsRecording List Continuous RecordingSystem Options System OptionsSecurity UsersIeee Go to System Options Security HttpsCertificates CertificatesGo to System Options Security Ieee Date & Time Audio SupportGo to System Options Security Certificates Basic TCP/IP Settings NetworkAdvanced TCP/IP Settings Axis Internet Dynamic DNS ServiceDNS Configuration NTP ConfigurationLink-Local IPv4 Address NAT traversal port mapping for IPv4QoS Quality of Service Smtp emailStorage UPnPTMRTP/H.264 BonjourPorts & Devices Network SharePorts Go to System Options Storage Click Network ShareMaintenance SupportReset to Factory Default Settings Plain ConfigScripting File UploadAxis P3363-VE Network Camera Troubleshooting TroubleshootingEmergency Recovery Procedure Checking the FirmwareSymptoms, Possible Causes and Remedial Actions Problems setting the IP addressProduct cannot be accessed from a browser Product is accessible locally but not externally Problems with streaming H.264Basic Status and Network indicator LEDs are flashing red rapidly Video and image problems, generalSetup Video & Audio Camera Settings SettingsFocus, zoom, and fan Remote focus and zoom doTechnical Specifications Technical SpecificationsFunction/group Specifications Network Security Alarm actionsPower ConnectorsPerformance Considerations M3.2
Related manuals
Manual 64 pages 7.22 Kb

P3363-VE specifications

Axis Communications P3363-VE is an advanced network camera specifically designed for outdoor surveillance applications. Renowned for its superior imaging capabilities and robust construction, the P3363-VE is a popular choice among professionals in security and surveillance sectors. This camera is engineered to perform reliably in challenging environments, making it suitable for a wide range of applications, including city surveillance, transportation hubs, and critical infrastructure protection.

One of the key features of the P3363-VE is its 3-megapixel resolution, which provides high-definition video quality with exceptional clarity. This enables the camera to capture detailed images even in low-light conditions, ensuring that critical incidents can be monitored without compromise. The camera is equipped with Automatic Day/Night functionality, allowing it to adapt seamlessly to varying light conditions, ensuring optimal performance around the clock.

The P3363-VE incorporates Axis' innovative Artpec-4 chip, which enhances image processing capabilities. This technology not only improves the camera’s ability to capture clear and sharp images in real-time but also facilitates advanced analytics. With features such as motion detection and video tampering alarms, the camera can intelligently monitor for unusual activity and send timely alerts.

Another significant feature of the P3363-VE is its weatherproof design, certified to IP66 and NEMA 4X standards. This robust construction allows the camera to operate effectively in harsh weather conditions, protecting it against rain, dust, and extreme temperatures. Additionally, the camera’s rugged housing is resistant to vandalism, ensuring that it retains its functionality in high-risk environments.

For versatility in installation, the P3363-VE supports Power over Ethernet (PoE), which simplifies the setup process by requiring only a single cable for both power and data transmission. This not only reduces installation costs but also enhances the flexibility of camera placement.

The P3363-VE is compatible with a range of video management software, making it easy to integrate into existing systems. Moreover, its support for H.264 and Motion JPEG ensures efficient video compression without compromising quality, allowing for reduced bandwidth and storage requirements.

In summary, the Axis Communications P3363-VE stands out due to its combination of high-resolution imaging, advanced processing capabilities, and rugged, weather-resistant design. These features make it an excellent choice for organizations seeking reliable outdoor surveillance solutions. Whether for protecting property or enhancing public safety, the P3363-VE camera provides the performance needed in today’s demanding security landscape.
Top Page Image Contents