Axis Communications P3363-VE Advanced TCP/IP Settings, Axis Internet Dynamic DNS Service

Page 46

AXIS P3363–VE Network Camera

System Options

AVHS is enabled by default. The settings are configured under System Options > Network > TCP IP > Basic.

One-click enabled - Press the product’s control button (see Hardware Overview, on page 6 ) to connect to an AVHS service over the Internet. Once registered, Always will be enabled and the Axis product stays connected to the AVHS service. If the product is not registered within 24 hours from when the button is pressed, the product will disconnect from the AVHS service.

Always - The Axis product will constantly attempt to connect to the AVHS service over the Internet. Once registered the product will stay connected to the service. This option can be used when the product is already installed and it is not convenient to use the one-click installation.

AXIS Internet Dynamic DNS Service

AXIS Internet Dynamic DNS Service assigns a host name for easy access to the product. For more information, see www.axiscam.net

To register the Axis product with AXIS Internet Dynamic DNS Service, go to System Options > Network > TCP/IP > Basic. Under Services, click the AXIS Internet Dynamic DNS Service Settings button (requires access to the Internet). The domain name currently registered at AXIS Internet Dynamic DNS service for the product can at any time be removed.

Advanced TCP/IP Settings

DNS Configuration

DNS (Domain Name Service) provides the translation of host names to IP addresses. The DNS settings are configured under System Options > Network > TCP/IP > Advanced.

Select Obtain DNS server address via DHCP to use the DNS settings provided by the DHCP server.

To make manual settings, select Use the following DNS server address and specify the following:

Domain name - Enter the domain(s) to search for the host name used by the Axis product. Multiple domains can be separated by semicolons. The host name is always the first part of a fully qualified domain name, for example, myserver is the host name in the fully qualified domain name myserver.mycompany.com where mycompany.com is the domain name.

Primary/Secondary DNS server - Enter the IP addresses of the primary and secondary DNS servers. The secondary DNS server is optional and will be used if the primary is unavailable.

NTP Configuration

NTP (Network Time Protocol) is used to synchronize the clock times of devices in a network. The NTP settings are configured under System Options > Network > TCP/IP > Advanced.

Select Obtain NTP server address via DHCP to use the NTP settings provided by the DHCP server.

To make manual settings, select Use the following NTP server address and enter the host name or IP address of the NTP server.

Host Name Configuration

The Axis product can be accessed using a host name instead of an IP address. The host name is usually the same as the assigned DNS name. The host name is configured under System Options > Network > TCP/IP > Advanced.

Select Obtain host name via IPv4 DHCP to use host name provided by the DHCP server running on IPv4.

Select Use the host name to set the host name manually.

Select Enable dynamic DNS updates to dynamically update local DNS servers whenever the Axis product’s IP address changes.

For more information, see the online help .

46

Page 45 Page 47
Image 46
Page 45 Page 47
Contents Axis P3363-VE Network Camera Liability About this DocumentLegal Considerations Intellectual Property RightsSupport Learn MoreTable of Contents Axis P3363-VE Network CameraTechnical Specifications Hardware Overview ConnectorsHardware Overview LED Indicators Color IndicationAxis P3363-VE Network Camera Accessing the Product Accessing the ProductAccess from a Browser Set Power Line Frequency Accessing the Product Access from the InternetSet the Root Password Network TCP/IP AdvancedControls on the Live View Live ViewAxis Media Control viewer toolbar PTZ Controls AMC Audio ControlsAxis P3363-VE Network Camera Media Streams How to Stream H.264Media Streams Axis Media Control AMCAlternative Methods of Accessing the Video Stream Accessing Audio Streams Setting Up the Product Setting Up the ProductBasic Setup Video Stream Video and AudioVideo and Audio ImageStream Profiles 264Image Appearance Video and Audio Camera SettingsExposure Settings White BalanceSet Shutter to Iris adjustmentView Area Day/NightGo to Video & Audio Video Stream and select the Image tab OverlayOverlay Image Go to Video & Audio Overlay ImageFocus & Zoom Privacy MaskGo to Video & Audio Focus & Zoom Audio Modes Audio SettingsAudio Input Audio Clips Audio OutputLive View Config Live View ConfigDefault Viewer for Browsers User Defined Links Viewer SettingsGo to Setup Live View Config Output ButtonsAxis P3363-VE Network Camera PTZ Pan Tilt Zoom Preset PositionsPTZ Pan Tilt Zoom Guard TourLimits AdvancedControls Camera Tampering DetectorsDetectors Motion DetectionSet Up Motion Detection Windows Motion Detection ParametersLow level 0% Default valuesAudio Detection Recommended valuesApplications Install ApplicationApplications Application LicensesAxis P3363-VE Network Camera Events EventsTime Setting Up an Action RuleSystem PTZ ControlRecipient Use with action RecipientsSchedules Go to Events Recipients and click AddRecurrences Go to Events Recurrences and click AddRecording List RecordingsRecordings Continuous RecordingSecurity System OptionsSystem Options UsersIeee Go to System Options Security HttpsCertificates CertificatesGo to System Options Security Ieee Audio Support Date & TimeGo to System Options Security Certificates Basic TCP/IP Settings NetworkDNS Configuration Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service NTP ConfigurationLink-Local IPv4 Address NAT traversal port mapping for IPv4QoS Quality of Service Smtp emailRTP/H.264 StorageUPnPTM BonjourPorts Ports & DevicesNetwork Share Go to System Options Storage Click Network ShareMaintenance SupportScripting Reset to Factory Default SettingsPlain Config File UploadAxis P3363-VE Network Camera Emergency Recovery Procedure TroubleshootingTroubleshooting Checking the FirmwareProblems setting the IP address Symptoms, Possible Causes and Remedial ActionsProduct cannot be accessed from a browser Problems with streaming H.264 Product is accessible locally but not externallyBasic Setup Video & Audio Camera Settings Status and Network indicator LEDs are flashing red rapidlyVideo and image problems, general SettingsFocus, zoom, and fan Remote focus and zoom doTechnical Specifications Technical SpecificationsPower Function/group Specifications Network SecurityAlarm actions ConnectorsPerformance Considerations M3.2
Related manuals
Manual 64 pages 7.22 Kb

P3363-VE specifications

Axis Communications P3363-VE is an advanced network camera specifically designed for outdoor surveillance applications. Renowned for its superior imaging capabilities and robust construction, the P3363-VE is a popular choice among professionals in security and surveillance sectors. This camera is engineered to perform reliably in challenging environments, making it suitable for a wide range of applications, including city surveillance, transportation hubs, and critical infrastructure protection.

One of the key features of the P3363-VE is its 3-megapixel resolution, which provides high-definition video quality with exceptional clarity. This enables the camera to capture detailed images even in low-light conditions, ensuring that critical incidents can be monitored without compromise. The camera is equipped with Automatic Day/Night functionality, allowing it to adapt seamlessly to varying light conditions, ensuring optimal performance around the clock.

The P3363-VE incorporates Axis' innovative Artpec-4 chip, which enhances image processing capabilities. This technology not only improves the camera’s ability to capture clear and sharp images in real-time but also facilitates advanced analytics. With features such as motion detection and video tampering alarms, the camera can intelligently monitor for unusual activity and send timely alerts.

Another significant feature of the P3363-VE is its weatherproof design, certified to IP66 and NEMA 4X standards. This robust construction allows the camera to operate effectively in harsh weather conditions, protecting it against rain, dust, and extreme temperatures. Additionally, the camera’s rugged housing is resistant to vandalism, ensuring that it retains its functionality in high-risk environments.

For versatility in installation, the P3363-VE supports Power over Ethernet (PoE), which simplifies the setup process by requiring only a single cable for both power and data transmission. This not only reduces installation costs but also enhances the flexibility of camera placement.

The P3363-VE is compatible with a range of video management software, making it easy to integrate into existing systems. Moreover, its support for H.264 and Motion JPEG ensures efficient video compression without compromising quality, allowing for reduced bandwidth and storage requirements.

In summary, the Axis Communications P3363-VE stands out due to its combination of high-resolution imaging, advanced processing capabilities, and rugged, weather-resistant design. These features make it an excellent choice for organizations seeking reliable outdoor surveillance solutions. Whether for protecting property or enhancing public safety, the P3363-VE camera provides the performance needed in today’s demanding security landscape.
Top Page Image Contents