Axis Communications P3363-VE user manual Date & Time, Audio Support

Page 44

AXIS P3363–VE Network Camera

System Options

CA certificates - to authenticate peer certificates, for example the certificate of an authentication server in case the Axis product is connected to an IEEE 802.1X protected network.

Note

Installed certificates, except preinstalled CA certificates, will be deleted if the product is reset to factory default. Preinstalled CA certificates that have been deleted will be reinstalled.

A Server/Client certificate can be self-signed or issued by a Certificate Authority (CA). A self-signed certificate offers limited protection and can be used before a CA-issued certificate has been obtained.

To install a self-signed certificate:

1.Go to System Options > Security > Certificates.

2.Click Create self-signed certificate and provide the requested information. To create and install a CA-signed certificate:

1.Create a self-signed certificate as described above.

2.Go to System Options > Security > Certificates.

3.Click Create certificate signing request and provide the requested information.

4.Copy the PEM-formatted request and send to the CA of your choice.

5.When the signed certificate is returned, click Install certificate and upload the certificate.

Server/Client certificates can be installed as Certificate from signing request or as Certificate and private key. Select Certificate and private key if the private key is to be upload as a separate file or if the certificate is in PKCS#12 format.

The Axis product is shipped with several preinstalled CA certificates. If required, additional CA certificates can be installed:

1.Go to System Options > Security > Certificates

2.Click Install certificate and upload the certificate.

Audio Support

Select Enable audio support to allow clients to retrieve audio streams from the Axis product. For information on how to configure audio settings, see Audio Settings, on page 24.

Note

Deselecting this option will disable audio globally in the Axis product, for configured events and profiles with audio as well.

Date & Time

The Axis product’s date and time settings are configured under System Options > Date & Time.

Current Server Time displays the current date and time (24h clock). The time can be displayed in 12h clock in the text overlay (see below).

To change the date and time settings, select the preferred Time mode under New Server Time:

Synchronize with computer time sets date and time according to the computer’s clock. With this option, date and time are set once and will not be updated automatically.

Synchronize with NTP Server obtains date and time from an NTP server. With this option, date and time settings are updated continuously. For information on NTP settings, see NTP Configuration, on page 46.

If using a host name for the NTP server, a DNS server must be configured. See DNS Configuration, on page 46.

44

Image 44
Contents Axis P3363-VE Network Camera About this Document Legal ConsiderationsLiability Intellectual Property RightsSupport Learn MoreTable of Contents Axis P3363-VE Network CameraTechnical Specifications Hardware Overview ConnectorsHardware Overview LED Indicators Color IndicationAxis P3363-VE Network Camera Access from a Browser Accessing the ProductAccessing the Product Accessing the Product Access from the Internet Set the Root PasswordSet Power Line Frequency Network TCP/IP AdvancedAxis Media Control viewer toolbar Live ViewControls on the Live View PTZ Controls AMC Audio ControlsAxis P3363-VE Network Camera How to Stream H.264 Media StreamsMedia Streams Axis Media Control AMCAlternative Methods of Accessing the Video Stream Accessing Audio Streams Basic Setup Setting Up the ProductSetting Up the Product Video and Audio Video and AudioVideo Stream ImageStream Profiles 264Video and Audio Camera Settings Exposure SettingsImage Appearance White BalanceIris adjustment View AreaSet Shutter to Day/NightOverlay Overlay ImageGo to Video & Audio Video Stream and select the Image tab Go to Video & Audio Overlay ImageGo to Video & Audio Focus & Zoom Privacy MaskFocus & Zoom Audio Input Audio SettingsAudio Modes Audio Clips Audio OutputDefault Viewer for Browsers Live View ConfigLive View Config Viewer Settings Go to Setup Live View ConfigUser Defined Links Output ButtonsAxis P3363-VE Network Camera Preset Positions PTZ Pan Tilt ZoomPTZ Pan Tilt Zoom Guard TourControls AdvancedLimits Detectors DetectorsCamera Tampering Motion DetectionSet Up Motion Detection Windows Motion Detection ParametersDefault values Audio DetectionLow level 0% Recommended valuesInstall Application ApplicationsApplications Application LicensesAxis P3363-VE Network Camera Events EventsSetting Up an Action Rule SystemTime PTZ ControlRecipients SchedulesRecipient Use with action Go to Events Recipients and click AddRecurrences Go to Events Recurrences and click AddRecordings RecordingsRecording List Continuous RecordingSystem Options System OptionsSecurity UsersIeee Go to System Options Security HttpsGo to System Options Security Ieee CertificatesCertificates Go to System Options Security Certificates Date & TimeAudio Support Basic TCP/IP Settings NetworkAdvanced TCP/IP Settings Axis Internet Dynamic DNS ServiceDNS Configuration NTP ConfigurationLink-Local IPv4 Address NAT traversal port mapping for IPv4QoS Quality of Service Smtp emailStorage UPnPTMRTP/H.264 BonjourPorts & Devices Network SharePorts Go to System Options Storage Click Network ShareMaintenance SupportReset to Factory Default Settings Plain ConfigScripting File UploadAxis P3363-VE Network Camera Troubleshooting TroubleshootingEmergency Recovery Procedure Checking the FirmwareProduct cannot be accessed from a browser Symptoms, Possible Causes and Remedial ActionsProblems setting the IP address Basic Product is accessible locally but not externallyProblems with streaming H.264 Status and Network indicator LEDs are flashing red rapidly Video and image problems, generalSetup Video & Audio Camera Settings SettingsFocus, zoom, and fan Remote focus and zoom doTechnical Specifications Technical SpecificationsFunction/group Specifications Network Security Alarm actionsPower ConnectorsPerformance Considerations M3.2
Related manuals
Manual 64 pages 7.22 Kb

P3363-VE specifications

Axis Communications P3363-VE is an advanced network camera specifically designed for outdoor surveillance applications. Renowned for its superior imaging capabilities and robust construction, the P3363-VE is a popular choice among professionals in security and surveillance sectors. This camera is engineered to perform reliably in challenging environments, making it suitable for a wide range of applications, including city surveillance, transportation hubs, and critical infrastructure protection.

One of the key features of the P3363-VE is its 3-megapixel resolution, which provides high-definition video quality with exceptional clarity. This enables the camera to capture detailed images even in low-light conditions, ensuring that critical incidents can be monitored without compromise. The camera is equipped with Automatic Day/Night functionality, allowing it to adapt seamlessly to varying light conditions, ensuring optimal performance around the clock.

The P3363-VE incorporates Axis' innovative Artpec-4 chip, which enhances image processing capabilities. This technology not only improves the camera’s ability to capture clear and sharp images in real-time but also facilitates advanced analytics. With features such as motion detection and video tampering alarms, the camera can intelligently monitor for unusual activity and send timely alerts.

Another significant feature of the P3363-VE is its weatherproof design, certified to IP66 and NEMA 4X standards. This robust construction allows the camera to operate effectively in harsh weather conditions, protecting it against rain, dust, and extreme temperatures. Additionally, the camera’s rugged housing is resistant to vandalism, ensuring that it retains its functionality in high-risk environments.

For versatility in installation, the P3363-VE supports Power over Ethernet (PoE), which simplifies the setup process by requiring only a single cable for both power and data transmission. This not only reduces installation costs but also enhances the flexibility of camera placement.

The P3363-VE is compatible with a range of video management software, making it easy to integrate into existing systems. Moreover, its support for H.264 and Motion JPEG ensures efficient video compression without compromising quality, allowing for reduced bandwidth and storage requirements.

In summary, the Axis Communications P3363-VE stands out due to its combination of high-resolution imaging, advanced processing capabilities, and rugged, weather-resistant design. These features make it an excellent choice for organizations seeking reliable outdoor surveillance solutions. Whether for protecting property or enhancing public safety, the P3363-VE camera provides the performance needed in today’s demanding security landscape.